Shop
Showing 5191–5220 of 7424 results
-
Indexable Tools, Milling Tools, Shoulder milling tools
SSB-LN15-R/L Single-Side Cutting, Disk Type Slotting Cutters
Indexable Tools, Milling Tools, Shoulder milling toolsSSB-LN15-R/L Single-Side Cutting, Disk Type Slotting Cutters
- Single-Side Cutting, Disk Type Slotting Cutters.
-
Note: Left-hand cutters are designated by a yellow groove.
- Number of inserts.
- Cutting depth maximum.
SKU: SSB-LN15-R/L Single-Side Cutting, Disk Type Slotting Cutters -
Face milling, Indexable Tools, Milling Tools, Shoulder milling tools
S890 SSB-13 Half Side / Face Disk Milling Cutters Carrying HELIDO S890 SNMU 1305 Inserts
Face milling, Indexable Tools, Milling Tools, Shoulder milling toolsS890 SSB-13 Half Side / Face Disk Milling Cutters Carrying HELIDO S890 SNMU 1305 Inserts
- Half Side / Face Disk Milling Cutters Carrying HELIDO S890 SNMU 1305 Inserts.
- Number of flutes.
- Cutting depth maximum.
SKU: S890 SSB-13 Half Side / Face Disk Milling Cutters Carrying HELIDO S890 SNMU 1305 Inserts -
Quick Change Tapping Chuck, Tool Holders
AUTO TAPPER SERIES OIL HOLE TAP COLLET TC (For Center Through AUTO TAPPER B, SYNCHRONIZED TAP HOLDER STC Type)
Quick Change Tapping Chuck, Tool HoldersAUTO TAPPER SERIES OIL HOLE TAP COLLET TC (For Center Through AUTO TAPPER B, SYNCHRONIZED TAP HOLDER STC Type)
- Oil Hole Tap Collet that can feed coolant without waste.
SKU: AUTO TAPPER SERIES OIL HOLE TAP COLLET TC (For Center Through AUTO TAPPER B, SYNCHRONIZED TAP HOLDER STC Type) -
Quick Change Tapping Chuck, Tool Holders
AUTO TAPPER SERIES TAP COLLET TC (for Auto Tapper B / R and Synchronized Tap Holder STC)
Quick Change Tapping Chuck, Tool HoldersAUTO TAPPER SERIES TAP COLLET TC (for Auto Tapper B / R and Synchronized Tap Holder STC)
- AUTO TAPPER SERIES TAP COLLET TC (for Auto Tapper B / R and Synchronized Tap Holder STC),
SKU: AUTO TAPPER SERIES TAP COLLET TC (for Auto Tapper B / R and Synchronized Tap Holder STC) -
Cut off, slot and groove milling, Indexable Tools, Milling Tools, Shoulder milling tools
SDN-CALN15 Full Slot Disk Type Slotting Cutters with Cartridges Carrying Tangentially Mounted LN.. 1506.. Inserts
Cut off, slot and groove milling, Indexable Tools, Milling Tools, Shoulder milling toolsSDN-CALN15 Full Slot Disk Type Slotting Cutters with Cartridges Carrying Tangentially Mounted LN.. 1506.. Inserts
- Full Slot Disk Type Slotting Cutters with Cartridges Carrying Tangentially Mounted LN.. 1506.. Inserts.
- Each cutter body can be changed into full slot, bottom or top milling configuration by mounting the cartridges accordingly.
- Half of the inserts are used on right-hand cartridges and half on left-hand cartridges.
- Gang-mill assembly SDN and left-hand SSB cutters feature two keyways.
- To reduce vibration, it is recommended to assemble gang-mills with alternating keyway position.
SKU: SDN-CALN15 Full Slot Disk Type Slotting Cutters with Cartridges Carrying Tangentially Mounted LN.. 1506.. Inserts -
JIS (MAS 403) BT30/BT40/BT50, Quick Change Tapping Chuck, Tool Holders
AUTO TAPPER SERIES AUTO TAPPER R BBT30/BBT40/BBT50
JIS (MAS 403) BT30/BT40/BT50, Quick Change Tapping Chuck, Tool HoldersAUTO TAPPER SERIES AUTO TAPPER R BBT30/BBT40/BBT50
- Ideal for die-cast workpieces or those with separately processed starting holes.
- The radial float amount of ±0.5mm not only prevents the tap from breaking due to misalignment, but also improves the thread accuracy.
SKU: AUTO TAPPER SERIES AUTO TAPPER R BBT30/BBT40/BBT50 -
JIS (MAS 403) BT30/BT40/BT50, Quick Change Tapping Chuck, Tool Holders
AUTO TAPPER SERIES AUTO TAPPER B BBT30/BBT40/BBT50
JIS (MAS 403) BT30/BT40/BT50, Quick Change Tapping Chuck, Tool HoldersAUTO TAPPER SERIES AUTO TAPPER B BBT30/BBT40/BBT50
- Reduces variation of tap depth to ±0.15mm, making it ideal for pipe tapping and blind hole tapping.
- Best-selling auto tapper series with a simple structure and affordable prices.
SKU: AUTO TAPPER SERIES AUTO TAPPER B BBT30/BBT40/BBT50 -
Cut off, slot and groove milling, Indexable Tools, Milling Tools, Shoulder milling tools
SDN-CAPM15 Full Slot Adjustable Slotting Cutters with Cartridges Carrying LNAT 1506…-PM Inserts (18.9-25.6 mm width range)
Cut off, slot and groove milling, Indexable Tools, Milling Tools, Shoulder milling toolsSDN-CAPM15 Full Slot Adjustable Slotting Cutters with Cartridges Carrying LNAT 1506…-PM Inserts (18.9-25.6 mm width range)
- Full Slot Adjustable Slotting Cutters with Cartridges Carrying LNAT 1506…-PM Inserts.
- Each cutter can be changed into full slot, bottom or top milling configuration.
- Use A type cartridges for inserts with 0.8-1.6 mm radii, B type cartridges for inserts with 2.5-3.2 mm radii and C type cartridges for insertswith 4.0 mm radius.
- Each cutter features two keyways.
- To reduce vibration, it is recommended to assemble gang-mills with alternating keyway position.
SKU: SDN-CAPM15 Full Slot Adjustable Slotting Cutters with Cartridges Carrying LNAT 1506...-PM Inserts (18.9-25.6 mm width range) -
Cut off, slot and groove milling, Indexable Tools, Milling Tools, Shoulder milling tools
SDN-CALN13 Full Slot Adjustable Slotting Cutters with Cartridges Carrying T490 LNHT 1306PNTR/L Inserts (17.5-23.0 mm width range)
Cut off, slot and groove milling, Indexable Tools, Milling Tools, Shoulder milling toolsSDN-CALN13 Full Slot Adjustable Slotting Cutters with Cartridges Carrying T490 LNHT 1306PNTR/L Inserts (17.5-23.0 mm width range)
- Full Slot Adjustable Slotting Cutters with Cartridges Carrying T490 LNHT 1306PNTR/L Inserts.
- Each cutter body can be changed into full slot, bottom or top milling configuration by mounting the cartridges accordingly.
- Half of the inserts are used on right-hand cartridges and half on left-hand cartridges.
- Gang-mill assembly SDN and left-hand SSB cutters feature two keyways.
- To reduce vibration, it is recommended to assemble gang-mills with alternating keyway position.
SKU: SDN-CALN13 Full Slot Adjustable Slotting Cutters with Cartridges Carrying T490 LNHT 1306PNTR/L Inserts (17.5-23.0 mm width range) -
Cut off, slot and groove milling, Face milling, Indexable Tools, Milling Tools, Shoulder milling tools
SDN-CALN11 Full Slot Disk Type Slotting Cutters with Cartridges Carrying Tangentially Mounted LN.. 1106.. Inserts
Cut off, slot and groove milling, Face milling, Indexable Tools, Milling Tools, Shoulder milling toolsSDN-CALN11 Full Slot Disk Type Slotting Cutters with Cartridges Carrying Tangentially Mounted LN.. 1106.. Inserts
- Full Slot Disk Type Slotting Cutters with Cartridges Carrying Tangentially Mounted LN.. 1106.. Inserts.
- Each cutter body can be changed into full slot, bottom or top milling configuration by mounting the cartridges accordingly.
- Half of the inserts are used on right-hand cartridges and half on left-hand cartridges.
- Gang-mill assembly SDN and left-hand SSB cutters feature two keyways.
- To reduce vibration, it is recommended to assemble gang-mills with alternating keyway position.
SKU: SDN-CALN11 Full Slot Disk Type Slotting Cutters with Cartridges Carrying Tangentially Mounted LN.. 1106.. Inserts -
Cut off, slot and groove milling, Indexable Tools, Milling Tools
SDN-XN13 Full Slot Disk Type Slotting Cutters Carrying XNMU 1306 Square Inserts with 4 Right- and 4 Left-Hand Cutting Edges
Cut off, slot and groove milling, Indexable Tools, Milling ToolsSDN-XN13 Full Slot Disk Type Slotting Cutters Carrying XNMU 1306 Square Inserts with 4 Right- and 4 Left-Hand Cutting Edges
- Full Slot Disk Type Slotting Cutters Carrying XNMU 1306 Square Inserts with 4 Right- and 4 Left-Hand Cutting Edges.
- Number of inserts.
- Cutting depth maximum.
SKU: SDN-XN13 Full Slot Disk Type Slotting Cutters Carrying XNMU 1306 Square Inserts with 4 Right- and 4 Left-Hand Cutting Edges -
Cut off, slot and groove milling, Indexable Tools, Milling Tools, Shoulder milling tools
SDN-CALN12 Full Slot Disk Type Slotting Cutters with Cartridges Carrying LNET 12… Tangentially Mounted Inserts
Cut off, slot and groove milling, Indexable Tools, Milling Tools, Shoulder milling toolsSDN-CALN12 Full Slot Disk Type Slotting Cutters with Cartridges Carrying LNET 12… Tangentially Mounted Inserts
- Full Slot Disk Type Slotting Cutters with Cartridges Carrying LNET 12… Tangentially Mounted Inserts.
- Number of inserts.
SKU: SDN-CALN12 Full Slot Disk Type Slotting Cutters with Cartridges Carrying LNET 12... Tangentially Mounted Inserts -
JIS (MAS 403) BT30/BT40/BT50, Quick Change Tapping Chuck, Tool Holders
Mega Synchro Tapping Holder Small Diameter Tap MGT3 BBT30/BBT40
JIS (MAS 403) BT30/BT40/BT50, Quick Change Tapping Chuck, Tool HoldersMega Synchro Tapping Holder Small Diameter Tap MGT3 BBT30/BBT40
- Stable small diameter tapping is achieved by the synchronization error compensation mechanism and minimized dynamic runout.
SKU: Mega Synchro Tapping Holder Small Diameter Tap MGT3 BBT30/BBT40 -
Cut off, slot and groove milling, Indexable Tools, Milling Tools
SDN-LN12 Full Slot Disk Type Slotting Cutters Carrying LNET 12 Tangentially Mounted Inserts
Cut off, slot and groove milling, Indexable Tools, Milling ToolsSDN-LN12 Full Slot Disk Type Slotting Cutters Carrying LNET 12 Tangentially Mounted Inserts
- Full Slot Disk Type Slotting Cutters Carrying LNET 12 Tangentially Mounted Inserts.
- Each tool is supplied with screws for the thinnest specified insert; verify use of the correct screw for the insert being used .
- For more than one insert option, slot width depends on the selected insert width.
- Gang-mill assembly SDN and left-hand SSB cutters feature two keyways.
- To reduce vibration, it is recommended to assemble gang-mills with alternating keyway position.
SKU: SDN-LN12 Full Slot Disk Type Slotting Cutters Carrying LNET 12 Tangentially Mounted Inserts -
-
Quick Change Tapping Chuck, Tool Holders
Mega Synchro Tapping Holder Large Diameter Tap MGT36
- With a structure that smoothly tracks under high cutting torque of large diameter tapping, it compensates for axial deviation due to synchronization error, greatly reducing load during tapping.
SKU: Mega Synchro Tapping Holder Large Diameter Tap MGT36 -
Chamfer milling, Cut off, slot and groove milling, Face milling, Indexable Tools, Milling Tools, Shoulder milling tools
FDN-CM Flange Type Full Width Slotting Cutters Carrying Round and Octagonal Inserts
Chamfer milling, Cut off, slot and groove milling, Face milling, Indexable Tools, Milling Tools, Shoulder milling toolsFDN-CM Flange Type Full Width Slotting Cutters Carrying Round and Octagonal Inserts
- Flange Type Full Width Slotting Cutters Carrying Round and Octagonal Inserts.
- Fully effective cutter.
- Number of inserts.
SKU: FDN-CM Flange Type Full Width Slotting Cutters Carrying Round and Octagonal Inserts -
Cut off, slot and groove milling, Face milling, Indexable Tools, Shoulder milling tools
FDN-CALN15 Full Slot Adjustable Slotting Cutters with Cartridges Carrying LN.. 1506… Inserts (18.9-25.6 mm width range)
Cut off, slot and groove milling, Face milling, Indexable Tools, Shoulder milling toolsFDN-CALN15 Full Slot Adjustable Slotting Cutters with Cartridges Carrying LN.. 1506… Inserts (18.9-25.6 mm width range)
- Full Slot Adjustable Slotting Cutters with Cartridges Carrying LN.. 1506… Inserts (18.9-25.6 mm width range).
- Each cutter body can be changed into full slot, bottom or top milling configuration, by mounting the cartridges accordingly.
- Minimum cutting width.
- The cutter will be set to the minimum width range, unless a specific width is requested by the user.
- Maximum cutting width.
- Cutting depth maximum.
- Number of inserts.
SKU: FDN-CALN15 Full Slot Adjustable Slotting Cutters with Cartridges Carrying LN.. 1506... Inserts (18.9-25.6 mm width range) -
Cut off, slot and groove milling, Face milling, Indexable Tools, Milling Tools, Shoulder milling tools
FDN-CAPM15 Full Slot Adjustable Slotting Cutters with Cartridges Carrying LNAT 1506…-PM Inserts (18.9-25.6 mm width range)
Cut off, slot and groove milling, Face milling, Indexable Tools, Milling Tools, Shoulder milling toolsFDN-CAPM15 Full Slot Adjustable Slotting Cutters with Cartridges Carrying LNAT 1506…-PM Inserts (18.9-25.6 mm width range)
- Full Slot Adjustable Slotting Cutters with Cartridges Carrying LNAT 1506…-PM Inserts (18.9-25.6 mm width range).
- Use A type cartridges for inserts with 0.8-1.6 mm radii, B type cartridges for inserts with 2.5-3.2 mm radii and C type cartridges for inserts with 4.0 mm radius.
- Minimum cutting width.
- The cutter will be set to the minimum width range, unless a specific width is requested by the user.
- Maximum cutting width.
- Cutting depth maximum.
- Number of inserts.
SKU: FDN-CAPM15 Full Slot Adjustable Slotting Cutters with Cartridges Carrying LNAT 1506...-PM Inserts (18.9-25.6 mm width range) -
Cut off, slot and groove milling, Face milling, Indexable Tools, Milling Tools, Shoulder milling tools
FDN-CALN13 Full Slot Adjustable Slotting Cutters with Cartridges Carrying T490 LNHT 1306PNTR/L Inserts (17.5-23.0 mm width range)
Cut off, slot and groove milling, Face milling, Indexable Tools, Milling Tools, Shoulder milling toolsFDN-CALN13 Full Slot Adjustable Slotting Cutters with Cartridges Carrying T490 LNHT 1306PNTR/L Inserts (17.5-23.0 mm width range)
- Full Slot Adjustable Slotting Cutters with Cartridges Carrying T490 LNHT 1306PNTR/L Inserts (17.5-23.0 mm width range).
- Half of the inserts are used on right-hand cartridges and half on left-hand cartridges.
- The cutter will be set to the minimum width range, unless a specific width is requested by the user.
SKU: FDN-CALN13 Full Slot Adjustable Slotting Cutters with Cartridges Carrying T490 LNHT 1306PNTR/L Inserts (17.5-23.0 mm width range) -
Cut off, slot and groove milling, Face milling, Indexable Tools, Milling Tools, Shoulder milling tools
FDN-XN13 Full Slot Flange Type Slotting Cutters Carrying XNMU 1306 Square Inserts with 4 Right- and 4 Left-Hand Cutting Edges
Cut off, slot and groove milling, Face milling, Indexable Tools, Milling Tools, Shoulder milling toolsFDN-XN13 Full Slot Flange Type Slotting Cutters Carrying XNMU 1306 Square Inserts with 4 Right- and 4 Left-Hand Cutting Edges
- Full Slot Flange Type Slotting Cutters Carrying XNMU 1306 Square Inserts with 4 Right- and 4 Left-Hand Cutting Edges.
- Number of inserts.
- Cutting depth maximum.
SKU: FDN-XN13 Full Slot Flange Type Slotting Cutters Carrying XNMU 1306 Square Inserts with 4 Right- and 4 Left-Hand Cutting Edges
