Collet Chucks Categories
Collet Chucks
Showing 1–12 of 54 results
-
Clamping Technology, Collet Chucks, JIS (MAS 403) BT30/BT40/BT50, Tool Holders
BT30 ER Collet Chucks
- Tool holding device: BT30.
- Bore holes for data carriers according to JIS B6339.
- Fine balanced at G 2.5 at 25,000 rpm.
- High runout accuracy (< 0.003 mm).
- Highest rigidity.
- Highest clamping forces.
SKU: BT30 ER Collet Chucks -
Clamping Technology, Collet Chucks, JIS (MAS 403) BT30/BT40/BT50, Tool Holders
BT30 ER Collet Chucks（Balanced）
Clamping Technology, Collet Chucks, JIS (MAS 403) BT30/BT40/BT50, Tool HoldersBT30 ER Collet Chucks（Balanced）
- BT30 ER Collet Chucks（Balanced）
- Tool holding device: BT30.
- Bore holes for data carriers according to JIS B6339.
- Fine balanced at G 2.5 at 25,000 rpm.
- High runout accuracy (< 0.003 mm).
- Highest rigidity.
- Highest clamping forces.
SKU: BT30 ER Collet Chucks（Balanced） -
Clamping Technology, Collet Chucks, JIS (MAS 403) BT30/BT40/BT50, Tool Holders
BT40 ER Collet Chucks
- Tool holding device: BT40.
- Bore holes for data carriers according to JIS B6339.
- Fine balanced at G 2.5 at 25,000 rpm.
- High runout accuracy (< 0.003 mm).
- Highest rigidity.
- Highest clamping forces.
SKU: BT40 ER Collet Chucks -
Clamping Technology, Collet Chucks, JIS (MAS 403) BT30/BT40/BT50, Tool Holders
BT50 ER Collet Chucks
- Tool holding device: BT50.
- Bore holes for data carriers according to JIS B6339.
- Fine balanced at G 2.5 at 25,000 rpm.
- High runout accuracy (< 0.003 mm).
- Highest rigidity.
- Highest clamping forces.
SKU: BT50 ER Collet Chucks -
Collet Chucks, DIN 6499, Tool Holders
CDP ER-M DIN 6499 ER Collet Chucks with Threaded FLEXFIT Adaptations
Collet Chucks, DIN 6499, Tool HoldersCDP ER-M DIN 6499 ER Collet Chucks with Threaded FLEXFIT Adaptations
- DIN 6499 ER Collet Chucks with Threaded FLEXFIT Adaptations.
-
When mounting items with FLEXFIT threaded adaptation to their holders, the mating surfaces and threaded areas must be thoroughly cleaned.
-
Apply appropriate tightening torque to eliminate a gap between the mating faces.
-
Estimated torque values are specified in the TQ_3 parameter.
SKU: CDP ER-M DIN 6499 ER Collet Chucks with Threaded FLEXFIT Adaptations -
ASME B5.50 CAT40/CAT50, Collet Chucks, JIS (MAS 403) BT30/BT40/BT50, Tool Holders
Collet Holder (CTA)
ASME B5.50 CAT40/CAT50, Collet Chucks, JIS (MAS 403) BT30/BT40/BT50, Tool HoldersCollet Holder (CTA)
- The CTA/CTH, though compact, has a thick body design.
- It absorbs cutting vibration perfectly and makes stable machining possible.
- Steel ball bearings are built into the nut, so the collet does not get twisted when tightened.
- The nut is finished using the same process after heat treatment, thus providing high-accuracy clamping.
SKU: Collet Holder (CTA) -
Collet Chucks, DIN 69893 HSK-A, HSK-E, HSK-F, JIS (MAS 403) BT30/BT40/BT50, Tool Holders
Collet Holder for high-speed (CTH)
Collet Chucks, DIN 69893 HSK-A, HSK-E, HSK-F, JIS (MAS 403) BT30/BT40/BT50, Tool HoldersCollet Holder for high-speed (CTH)
- The CTA/CTH, though compact, has a thick body design.
- It absorbs cutting vibration perfectly and makes stable machining possible.
- Steel ball bearings are built into the nut, so the collet does not get twisted when tightened.
- The nut is finished using the same process after heat treatment, thus providing high-accuracy clamping.
SKU: Collet Holder for high-speed (CTH) -
Collet Chucks, Tool Holders
DETa-1 Collet
- Slim and compact without the nut at the tip and minimize interference with work-piece and jig fixture.
- With their optimal collapsibility, these collets make it possible to reduce the number of collets you need by 90%, compared to our former products.
SKU: DETa-1 Collet -
Collet Chucks, JIS (MAS 403) BT30/BT40/BT50, Tool Holders
DETa-1 Collet Holder A type (DTA)
- Slim and compact without the nut at the tip and minimize interference with work-piece and jig fixture.
- With their optimal collapsibility, these collets make it possible to reduce the number of collets you need by 90%, compared to our former products.
SKU: DETa-1 Collet Holder A type (DTA) -
ASME B5.50 CAT40/CAT50, Collet Chucks, DIN 69893 HSK-A, HSK-E, HSK-F, JIS (MAS 403) BT30/BT40/BT50, Tool Holders
DETa-1 Collet Holder E type (DTE)
ASME B5.50 CAT40/CAT50, Collet Chucks, DIN 69893 HSK-A, HSK-E, HSK-F, JIS (MAS 403) BT30/BT40/BT50, Tool HoldersDETa-1 Collet Holder E type (DTE)
- Slim and compact without the nut at the tip and minimize interference with work-piece and jig fixture.
- With their optimal collapsibility, these collets make it possible to reduce the number of collets you need by 90%, compared to our former products.
SKU: DETa-1 Collet Holder E type (DTE)
