SDN-LN12 Full Slot Disk Type Slotting Cutters Carrying LNET 12 Tangentially Mounted Inserts

Features

• 6.0 to 14.6 mm (0.25 – 0.57 “) width range
• The shape of the LNET 12.. insert and the tangential clamping on the cutter results in narrow slotting cutters with a fine pitch
• The positive, rake face chipformer reduces cutting forces and power consumption by 15%-25%. It also directs chips away from cut area, leaving the side surfaces unscratched
• This configuration has less chattering problems and better tool life, using tangential insert type with 4 cutting edges (two right-hand and two left-hand cutting edges)
• LNET 12… inserts are designed for general applications, especially on cast iron and steel
• Including FDN (flanged type) and SDN (disc type) slot milling cutters