Inside Measurement
Showing all 11 results
-
Inside Measurement, Metrology
American Ring Gauge External Thread Go-No-Go Gauge Tooth Gauge
- XYC ring gauge material-GCR15 (bearing steel); the hardness of the specification ≤3MM is HRC58-65°, and the hardness of >3MM is HRC58-60°.
- GB/T3934 standard is adopted, and the accuracy of the go-no-go end is 6G, and 5H and 6H grades are also available.
- Ring gauge mark: GO is used to detect the through end, and NOGO is used to indicate the stop end.
- Round anti-skid design, high hardness and wear resistance.
SKU: 002-23042605 -
Inside Measurement, Metrology
American-made Threaded Plug Gauge Bolt Fine Thread High Precision Detection Gauge
Inside Measurement, MetrologyAmerican-made Threaded Plug Gauge Bolt Fine Thread High Precision Detection Gauge
- The thread plug gauge is used for comprehensive inspection of internal threads, and the thread ring gauge is used for comprehensive inspection of external threads.
- How to identify the plug gauge, the threaded plug gauge is composed of two parts, one is called the through end, and the other is called the stop end.
- The through end part of the plug gauge can be screwed into the thread completely, and the stop part can only be screwed into the thread for 1.5-2 turns to be qualified.
- The hardness of the specification ≤3MM is HRC53-60°, and the hardness of >3MM is HRC58-60°.
- The accuracy of the go-no-go end provides 5H, 6H, and 6G, 7H grades are also available.
- Specifications ≤ M1.4 provide 5H accuracy.
SKU: 002-23042602 -
Inside Measurement
Electronic Digital Display Three Jaw Inside Diameter Micrometer
- Big screen,easy for reading.
- With durable carbide needle.
- Fuctions as preset,set zero,keep data,metric-inch conversion,ect
- Setting gauge can be used to set zero .
- Digital display system is same as the digital outside micrometer.
SKU: Electronic Digital Display Three Jaw Inside Diameter Micrometer -
Inside Measurement
Internal Micrometer With Two-Point Contact
- Internal Micrometer uses screw pair as intermediate real measuring tool, with two contact points for inside measurements. Internal Micrometer is mainly used to measure internal diameter, width of inside groove, or distance between two inside surfaces.
- Wide measuring range, with extension rods set for different measuring range.
- After precision extension rods are changed, micrometer doesn’t need to be set zero again.
- With locking device.
SKU: Internal Micrometer With Two-Point Contact -
-
Inside Measurement, Metrology
Internal Thread Fine Thread Go-no-go Gauge Metric Thread Plug Gauge
- The thread plug gauge is used for comprehensive inspection of internal threads, and the thread ring gauge is used for comprehensive inspection of external threads.
- How to identify the plug gauge, the threaded plug gauge is composed of two parts, one is called the through end, and the other is called the stop end.
- The through end part of the plug gauge can be screwed into the thread completely, and the stop part can only be screwed into the thread for 1.5-2 turns to be qualified.
- The hardness of the specification ≤3MM is HRC53-60°, and the hardness of >3MM is HRC58-60°.
- The accuracy of the go-no-go end provides 5H, 6H, and 6G, 7H grades are also available.
- Specifications ≤ M1.4 provide 5H accuracy.
SKU: 002-23042603 -
Inside Measurement, Metrology
Metric Thread Ring Gauge Go No-Go Gauge
- XYC ring gauge material-GCR15 (bearing steel); the hardness of the specification ≤3MM is HRC58-65°, and the hardness of >3MM is HRC58-60°.
- GB/T3934 standard is adopted, and the accuracy of the go-no-go end is 6G, and 5H and 6H grades are also available.
- Ring gauge mark: GO is used to detect the through end, and NOGO is used to indicate the stop end.
- Round anti-skid design, high hardness and wear resistance.
SKU: 002-23042604 -
Inside Measurement, Metrology
Thread Go-no-go Gauge Metric Standard Plug Gauge
- The thread plug gauge is used for comprehensive inspection of internal threads, and the thread ring gauge is used for comprehensive inspection of external threads.
- How to identify the plug gauge, the threaded plug gauge is composed of two parts, one is called the through end, and the other is called the stop end.
- The through end part of the plug gauge can be screwed into the thread completely, and the stop part can only be screwed into the thread for 1.5-2 turns to be qualified.
- The hardness of the specification ≤3MM is HRC53-60°, and the hardness of >3MM is HRC58-60°.
- The accuracy of the go-no-go end provides 5H, 6H, and 6G, 7H grades are also available.
- Specifications ≤ M1.4 provide 5H accuracy.
SKU: 002-23042601
