Features
- Wide range of widths (from 14 up to 26 mm w.o.c)
- Soft cut with the positive-shaped inserts
- Including FDN (flanged type) and SDN (disc type) slot milling cutters
- Low power consumption and heat generation
Indexable Tools, Milling Tools, Shoulder milling tools
SSB-LN15-R/L Single-Side Cutting, Disk Type Slotting Cutters
Availability:
200 in stock
- Single-Side Cutting, Disk Type Slotting Cutters.
-
Note: Left-hand cutters are designated by a yellow groove.
- Number of inserts.
- Cutting depth maximum.
Based on 0 reviews
Be the first to review “SSB-LN15-R/L Single-Side Cutting, Disk Type Slotting Cutters”
You may also like…
-
-
Indexable Tools, Milling Tools, Milling Inserts
LNHW 1506 PNTN (ceramic) Milling Inserts
- TANGMILL tangentially clamped ceramic insert.
- Used for high speed machining of grey and nodular cast iron.
- Peripherally ground for high accuracy, provides excellent surface finish.
SKU: LNHW 1506 PNTN (ceramic) Milling Inserts -
Indexable Tools, Milling Tools, Milling Inserts
LNMT/LNHT 1506…-N HT Milling Inserts
- TANGMILL, tangentially clamped inserts featuring 4 straight cutting edges 2 L.H. and 2 R.H.
- Can machine a 90° shoulder according to the table below.
- APMX=9 mm for steel and 14 mm for cast iron.
SKU: LNMT/LNHT 1506...-N HT Milling Inserts -
Indexable Tools, Milling Tools, Milling Inserts
LNKX 1506 1.5X45 PN-N Milling Inserts
- Tangentially clamped chamfered inserts used only on 90° cutters for smooth engagement and elimination of chipping on the material edge during exiting.
- The 45° chamfer enables machining closer to the clamping fixture.
SKU: LNKX 1506 1.5X45 PN-N Milling Inserts
Related products
-
Indexable Tools, Boring and Reaming Tools, Fine boring tools
DBJ10/12/16 Micro-boring head
- Each boring head with three different sizes insert holders for different boring ranges.
- Standard insert holder for inserts with lead angle 3°，for a better working performance during bling blind hole boring.
- Insert holder can be mounted in opposite direction to back boring.
- Better connection between insert holder and tool body provides higher tool prigidty and working performance.
- AII DCK-CBH fine boring tools are with internal cooling design,which increases the surface finish and inserts tool life.
SKU: DBJ10/12/16 Micro-boring head -
Indexable Tools, Boring and Reaming Tools, Fine boring tools
DBJ Micro-boring Tool Kit
- Adjustment Precision 0.002 mm on Diameter.
- One Boring Body With Ineert Holder or Boring Bar Can Be For Boing And Back Boring.
- Standaed insert HoIder For Inserts With lead Angle 3°，For a Better Working Performance During Blind Hole Boring.
- The extensive Area Serrated With connection Between insert Holder And Tool Body Provides Higer Tool Rigity And Working Performance.
SKU: DBJ Micro-boring Tool Kit -
Indexable Tools, Boring and Reaming Tools, Fine boring tools
DBJ16 Micro-boring Bar
- Adjustment Precision 0.002 mm on Diameter.
- One Boring Body With Ineert Holder or Boring Bar Can Be For Boing And Back Boring.
- Standaed insert HoIder For Inserts With lead Angle 3°，For a Better Working Performance During Blind Hole Boring.
- The extensive Area Serrated With connection Between insert Holder And Tool Body Provides Higer Tool Rigity And Working Performance.
SKU: DBJ16 Micro-boring Bar -
Indexable Tools, Boring and Reaming Tools, Fine boring tools
CBH Finish Borng Tool
1.Each boring head with three different sizes insert holders for different boring ranges.
2.Standard insert holder for inserts with lead angle 3°，for a better working performance during bling blind hole boring.
3.Insert holder can be mounted in opposite direction to back boring.
4.Better connection between insert holder and tool body provides higher tool prigidty and working performance.
5.AII DCK-CBH fine boring tools are with internal cooling design,which increases the surface finish and inserts tool lifeSKU: CBH Finish Borng Tool
There are no reviews yet.