SKU: AUTO TAPPER SERIES AUTO TAPPER E M3 - M36 BBT40/BBT50
Categories: JIS (MAS 403) BT30/BT40/BT50, Quick Change Tapping Chuck, Tool Holders
JIS (MAS 403) BT30/BT40/BT50, Quick Change Tapping Chuck, Tool Holders
AUTO TAPPER SERIES AUTO TAPPER E M3 – M36 BBT40/BBT50
Availability:
200 in stock
- Ideal for machining center tapping cycles.
| Brands | |
|---|---|
| Units of length |
Based on 0 reviews
Be the first to review “AUTO TAPPER SERIES AUTO TAPPER E M3 – M36 BBT40/BBT50”
You may also like…
Related products
-
Clamping Technology, Tool Holders, Slotting Cutter Adapters, DIN 69893 HSK-A, HSK-E, HSK-F
Soltting Cutter Holders
Clamping Technology, Tool Holders, Slotting Cutter Adapters, DIN 69893 HSK-A, HSK-E, HSK-FSoltting Cutter Holders
- Tool holding device: HSK 63A-100A.
- Bore holes for data carriers according to DIN 69893.
- Fine balanced at G 2.5 at 25,000 rpm.
- High runout accuracy (< 0.003 mm).
- Highest rigidity.
- Highest clamping forces.
SKU: Soltting Cutter Holders -
Clamping Technology, Tool Holders, Slotting Cutter Adapters, JIS (MAS 403) BT30/BT40/BT50
BT 2° Side Lock Holders
Clamping Technology, Tool Holders, Slotting Cutter Adapters, JIS (MAS 403) BT30/BT40/BT50BT 2° Side Lock Holders
- Tool holding device: BT30-50.
- Bore holes for data carriers according to JIS B6339.
- Run-out accuracy ≤ 0.003 mm measured from taper
to D1. - Balancing grade G2.5 at 25,000 RPM or Umax < 1 gmm.
SKU: BT 2° Side Lock Holders -
Clamping Technology, Tool Holders, Weldon Tool Holder, DIN 69893 HSK-A, HSK-E, HSK-F
Side Lock Holders
Clamping Technology, Tool Holders, Weldon Tool Holder, DIN 69893 HSK-A, HSK-E, HSK-FSide Lock Holders
- Tool holding device: HSK 63-100.
- Bore holes for data carriers according to DIN 69893.
- Run-out accuracy ≤ 0.003 mm measured from taper
to D1 - Balancing grade G2.5 at 25,000 RPM or Umax < 1 gmm
SKU: Side Lock Holders -
Clamping Technology, Tool Holders, Quick Change Tapping Chuck, DIN 69893 HSK-A, HSK-E, HSK-F
HSK V Holders
Clamping Technology, Tool Holders, Quick Change Tapping Chuck, DIN 69893 HSK-A, HSK-E, HSK-FHSK V Holders
- HSK V Holders 63-100A.
- Bore holes for data carriers according to DIN 69893.
- Improve tap life by 85% or more.
- Improve processing life 2-4 times.
- Improve thread accuracy and surface quality.
- First choice for extrusion taps.
- Suitable for processing inch threads.
SKU: HSK V Holders
There are no reviews yet.