Features
- Wide range of widths (from 14 up to 26 mm w.o.c)
- Soft cut with the positive-shaped inserts
- Including FDN (flanged type) and SDN (disc type) slot milling cutters
- Low power consumption and heat generation
Cut off, slot and groove milling, Face milling, Indexable Tools, Shoulder milling tools
FDN-CALN15 Full Slot Adjustable Slotting Cutters with Cartridges Carrying LN.. 1506… Inserts (18.9-25.6 mm width range)
Availability:
200 in stock
- Full Slot Adjustable Slotting Cutters with Cartridges Carrying LN.. 1506… Inserts (18.9-25.6 mm width range).
- Each cutter body can be changed into full slot, bottom or top milling configuration, by mounting the cartridges accordingly.
- Minimum cutting width.
- The cutter will be set to the minimum width range, unless a specific width is requested by the user.
- Maximum cutting width.
- Cutting depth maximum.
- Number of inserts.
Based on 0 reviews
Be the first to review “FDN-CALN15 Full Slot Adjustable Slotting Cutters with Cartridges Carrying LN.. 1506… Inserts (18.9-25.6 mm width range)”
You may also like…
-
-
Indexable Tools, Milling Tools, Milling Inserts
LNMT/LNHT 1506…-N HT Milling Inserts
- TANGMILL, tangentially clamped inserts featuring 4 straight cutting edges 2 L.H. and 2 R.H.
- Can machine a 90° shoulder according to the table below.
- APMX=9 mm for steel and 14 mm for cast iron.
SKU: LNMT/LNHT 1506...-N HT Milling Inserts -
Related products
-
Indexable Tools, Boring and Reaming Tools, Fine boring tools
FBH Micro Back-boring Tool
- Adjustment precision 0.002 mm diameter.
- One boring body with insert hoder or boring bar can be for boring and back boring.
- Standard insert holder for inserts with lead 3°，for a better working performance during bling hole boring.
- The extensive area serrated with connection between insert holder and tool body provides higher tool rigidity and working performance.
- All DCK-FBH fine boring tools are with intemal cooling design,which increases the surface finish and inserts tool life.
SKU: FBH Micro Back-boring Tool -
Indexable Tools, Boring and Reaming Tools, Fine boring tools
FBH32P Micro-finishing Boring Kit
- Adjustment Precision 0.002 mm on Diameter
- One Boring Body With Ineert Holder or Boring Bar Can Be For Boing And Back Boring
- Standaed insert HoIder For Inserts With lead Angle 3°，For a Better Working Performance During Blind Hole Boring.
- The extensive Area Serrated With connection Between insert Holder And Tool Body Provides Higer Tool Rigity And Working Performance.
- All DCK-FBH Fine Boring Tools Are With internal Cooling Design,Which increases The Surface Finish And inserts Tool Life
SKU: Micro-finishing Boring Kit
There are no reviews yet.