Deals of The Day
Ends in:
Solid round tools, TAPPING, Thread Milling Cutters
OSG Thread Mill AT-1 Internal Thread M Type Machining
Solid round tools, TAPPING, Thread Milling Cutters
OSG Thread Mill AT-1 Internal Thread M Type Machining
1-pass process enables high quality internal threading.
Right-hand cut and left-hand helix geometry prevents bending.
Unequal spacing and variable lead flute geometry minimizes vibration.
EgiAs coating for exceptional wear resistance and toughness.
SKU: n/a
Solid round tools, Spiral Point, TAPPING
OSG chip removal EX-POT machine tap M6*1 M8*1.25 M10*1.5 straight groove tap
Solid round tools, Spiral Point, TAPPING
OSG chip removal EX-POT machine tap M6*1 M8*1.25 M10*1.5 straight groove tap
Suitable for through hole tapping of carbon steels, alloy steels and nonferrousmetals whose chips are produced in continuous coil form.
These taps dischargechips through the hole.
SKU: n/a
Calipers, Metrology
Mitutoyo 500-196-30 electronic caliper industrial grade 0-300mm Digital Display vernier Caliper
Calipers, Metrology
The ZERO/ABS key allows the display to be zero-set at any slider position along the scale for incremental comparison
Mitutoyo 500-196-30 electronic caliper industrial grade 0-300mm Digital Display vernier Caliper
Large and clear LCD readout.
The ZERO/ABS key allows the display to be zero-set at any slider position along the scale for incremental comparison
measurements. This switch also will allow return to the absolute (ABS) coordinate and display of the true position from the
origin point (usually jaws-closed point).
Data Hold Unit (959143) is optional.
Carbide-tipped jaw-type calipers are also available.
Thumb roller included only on calipers up to and including 12” or 300mm.
Supplied in fitted plastic case. Except 40” / 1000mm supplied in wooden case.
SKU: n/a
Solid Round Tools
-
Solid Milling, Solid round tools, Square
SOLID CARBIDE ENDMILLS UA100-SH3 3 Flute, With Long Shank Length
Solid Milling, Solid round tools, SquareSOLID CARBIDE ENDMILLS UA100-SH3 3 Flute, With Long Shank Length
● Suitable for aluminum alloy (Si ≤ 12%) and copper alloy (< 200HB) general
processing.
● Special edge design prevents vibration and effectively solves the crumbs.
● Water cooling is the best cooling method.SKU: UA100-SH3 3 Flute, with Long Shank Length -
Solid Milling, Solid round tools, Square
SOLID CARBIDE ENDMILLS UA100-SL3 3 Flute, Long Flute Length
● Suitable for aluminum alloy (Si ≤ 12%) and copper alloy (< 200HB) general
processing.
● Special edge design prevents vibration and effectively solves the crumbs.
● Water cooling is the best cooling method.SKU: UA100-SL3 3 Flute, Long Flute Length -
Solid Milling, Solid round tools, Square
SOLID CARBIDE ENDMILLS UA100-S3 3 Flute, Standard Length
● Suitable for aluminum alloy (Si ≤ 12%) and copper alloy (< 200HB) general
processing.
● Special edge design prevents vibration and effectively solves the crumbs.
● Water cooling is the best cooling method.SKU: UA100-S3 3 Flute, Standard Length -
Solid Milling, Solid round tools, Square
SOLID CARBIDE ENDMILLS UA100-S2 2 Flute, Standard Length
● Suitable for aluminum alloy (Si ≤ 12%) and copper alloy (< 200HB) general
processing.
● Special edge design prevents vibration and effectively solves the crumbs.
● Water cooling is the best cooling method.SKU: UA100-S2 2 Flute, Standard Length -
Solid Milling, Solid round tools, Square
SOLID CARBIDE ENDMILLS SS200-C4 4 Flute, With Variable Helix
Solid Milling, Solid round tools, SquareSOLID CARBIDE ENDMILLS SS200-C4 4 Flute, With Variable Helix
● Suitable for high efficiency efficient rough milling and
semi-finishing milling of stainless steel（＜280HB）.
● Variable Bottom edge variation and unequal helix angle
and unequal flute pitch have with excellent anti-vibration
capacity, and ensure high surface precision.
● Applicable for high efficiencyt machining at large cutting
depth (ap), large cutting width (ae), with high metal removal
rate.SKU: SS200-C4 4 Flute, with Variable Helix -
Solid Milling, Solid round tools, Square
SOLID CARBIDE ENDMILLS SS200-CS4 4 Flute, Stub Length With Variable Helix
Solid Milling, Solid round tools, SquareSOLID CARBIDE ENDMILLS SS200-CS4 4 Flute, Stub Length With Variable Helix
● Suitable for high efficiency efficient rough milling and
semi-finishing milling of stainless steel（＜280HB）.
● Variable Bottom edge variation and unequal helix angle
and unequal flute pitch have with excellent anti-vibration
capacity, and ensure high surface precision.
● Applicable for high efficiencyt machining at large cutting
depth (ap), large cutting width (ae), with high metal removal
rate.SKU: SS200-CS4 4 Flute, Stub Length with variable Helix -
Solid Milling, Solid round tools, Square
SOLID CARBIDE ENDMILLS US300-S4 4 Flute, Standard Length
● Suitable for rough milling, semi-finishing and finishing of stainless
steel(<280HB).
● Design for the small depth/large width in face milling, large depth/
small width in side milling, less than 0.3D inshallow slotting.SKU: US300-S4 4 Flute, Standard Length -
Solid Milling, Solid round tools, Square
SOLID CARBIDE ENDMILLS US300-SS4 4 Flute, Stub Length
● Suitable for rough milling, semi-finishing and finishing of stainless
steel(<280HB).
● Design for the small depth/large width in face milling, large depth/
small width in side milling, less than 0.3D inshallow slotting.SKU: US300-SS4 4 Flute, Stub Length -
-
Indexable Tools
-
Boring and Reaming Tools, Fine boring tools, Indexable Tools
FBH Micro-borng TooI
- Adjustment precision 0.002 mm diameter.
- One boring body with insert hoder or boring bar can be for boring and back boring.
- Standard insert holder for inserts with lead 3°，for a better working performance during bling hole boring.
- The extensive area serrated with connection between insert holder and tool body provides higher tool rigidity and working performance.
- All DCK-FBH fine boring tools are with intemal cooling design,which increases the surface finish and inserts tool life.
SKU: FBH Micro-borng TooI -
Boring and Reaming Tools, Fine boring tools, Indexable Tools
FBH Micro Back-boring Tool
- Adjustment precision 0.002 mm diameter.
- One boring body with insert hoder or boring bar can be for boring and back boring.
- Standard insert holder for inserts with lead 3°，for a better working performance during bling hole boring.
- The extensive area serrated with connection between insert holder and tool body provides higher tool rigidity and working performance.
- All DCK-FBH fine boring tools are with intemal cooling design,which increases the surface finish and inserts tool life.
SKU: FBH Micro Back-boring Tool -
Boring and Reaming Tools, Fine boring tools, Indexable Tools
FBH Micro-boring Head
- Adjustment precision 0.002 mm diameter.
- One boring body with insert hoder or boring bar can be for boring and back boring.
- Standard insert holder for inserts with lead 3°，for a better working performance during bling hole boring.
- The extensive area serrated with connection between insert holder and tool body provides higher tool rigidity and working performance.
- All DCK-FBH fine boring tools are with intemal cooling design,which increases the surface finish and inserts tool life.
SKU: FBH Micro-boring Head -
Boring and Reaming Tools, Fine boring tools, Indexable Tools
FBH Micro-boring Bar
- Adjustment precision 0.002 mm diameter.
- One boring body with insert hoder or boring bar can be for boring and back boring.
- Standard insert holder for inserts with lead 3°，for a better working performance during bling hole boring.
- The extensive area serrated with connection between insert holder and tool body provides higher tool rigidity and working performance.
- All DCK-FBH fine boring tools are with intemal cooling design,which increases the surface finish and inserts tool life.
SKU: FBH Micro-boring Bar
Metrology
-
Calipers
Digital Calipers (zero type)
- Absolute zero type caliper is the new type digital caliper.
- The absolute zero type caliper can continually track the zero point. Whenever you turn on,the screen can read the position size.
- For the convient measurement.
- The absolute zero type caliper needn’t to be adjusted from time to time Also it wouldn’t cause fault by fast checking.
SKU: Digital Calipers (zero type) -
Calipers, Metrology
Three Buttons Digital Calipers
- Absolute zero type caliper is the new type digital caliper.
- The absolute zero type caliper can continually track the zero point. Whenever you turn on,the screen can read the position size.
- For the convient measurement.
- The absolute zero type caliper needn’t to be adjusted from time to time Also it wouldn’t cause fault by fast checking.
SKU: Three Buttons Digital Calipers -
Calipers
Vernier Caliper-Carbon Steel/Stainless
- The products are according with GB/T21389 D1N862 or JIS B 7507 or Q/321282JLC03 respectively.
- Made of carbon steel or stainless steel.
- The main scale and the vernier are satin chromed.
- The beam and the vernier are entirely heat-terated,and all the measuring faces are specially hardened.
- Special requirement can be satisfied at request.
SKU: Vernier Caliper-Carbon Steel/Stainless -
Calipers, Metrology
Dial Caliper Stainless
- The products are according with GB/T21389 DIN862 respectively.
- Made of stainless steel and manufactured with modern technology.
- The beam and the vernie are entirely heat-treated. All the measuring faces are hardened.
- The colour of the dial scale and it’s frame can be selected.
- Different measuring systems can be supplied at request: mm, inch,mm/inch,inch/mm
- Special requirement can be satisfied at request
SKU: Dial Caliper Stainless -
Depth Gages, Metrology
Depth Caliper
- The products are according with GB/T21388 or DIN862.
- Made of carbon steel or Stainless steel.
- The main scale and the vernie are satin chromed.
- The beam and the vernier are entirely heat-treated, all the measuring faces are hardened.
- Special requirement can be satisfied at request.
SKU: Depth Caliper -
Height Gages
Height Caliper Dial/Digital Display
- The products are according with GB/T21388 or DIN862.
- Made of carbon steel or Stainless steel.
- The main scale and the vernie are satin chromed.
- The beam and the vernier are entirely heat-treated, all the measuring faces are hardened.
- Special requirement can be satisfied at request.
SKU: Height Caliper Dial
Speed Reducers
View All Speed Reducers-
DC Gear Motor
DC Motor-6W60mm
- Motor voltage, power and speed will be customized according to his requestment under the allowed circumstance of adoptable dimension.
- We use W after D in the model to express the external brush motor, such as Z2DW06-12GN. If no W, it means the standard internal brush motor. For external brush motor, you can replce the brush directly. For intemal ones, we need to disassembly the motor first.
SKU: DC Motor-6W60mm -
DC Gear Motor
DC Motor-10W60mm
- Motor voltage, power and speed will be customized according to his requestment under the allowed circumstance of adoptable dimension.
- We use W after D in the model to express the external brush motor, such as Z2DW06-12GN. If no W, it means the standard internal brush motor. For external brush motor, you can replce the brush directly. For intermal ones, we need to disassembly the motor first.
SKU: DC Motor-10W60mm
