(1) Up to 50% of this length may be used to regrind
DRILLING, Solid round tools, Taper (8D - 30D)
SCD-ACP-CS (20xD) Solid Carbide Drills with Coolant Holes for Automotive Crankshaft Applications, Drilling Depth 20-22xD
Availability:
200 in stock
- Solid carbide drills with coolant holes for automotive crankshaft applications, drilling depth 20-22xD.
- Right-hand cut with and without internal coolant nozzles.
- IC08 submicron substrate.
- Most advanced TiAlN coating for best hole quality, high performance reliability and economical output.
| Brands | |
|---|---|
| Units of length | |
| Workpiece Material | Hardened Steel (H), Heat-resistant Alloy and Titanium Alloy (S), Stainless Steel (M), Steel (P) |
Based on 0 reviews
Be the first to review “SCD-ACP-CS (20xD) Solid Carbide Drills with Coolant Holes for Automotive Crankshaft Applications, Drilling Depth 20-22xD”
Related products
-
Solid round tools, Solid Milling, Corner Radius, Square
SOLID CARBIDE ENDMILLS US200-R2 2 Flute Corner Radius
Solid round tools, Solid Milling, Corner Radius, SquareSOLID CARBIDE ENDMILLS US200-R2 2 Flute Corner Radius
● Suitable for general machining of stainless steel
(<280HB).
● Special edge design effectively solves the crumbs.
● Water，oil cooling are the best cooling methods.SKU: US200-R2 2 Flute Corner Radius -
Solid round tools, Solid Milling, Square
SOLID CARBIDE ENDMILLS US300-SS4 4 Flute, Stub Length
● Suitable for rough milling, semi-finishing and finishing of stainless
steel(<280HB).
● Design for the small depth/large width in face milling, large depth/
small width in side milling, less than 0.3D inshallow slotting.SKU: US300-SS4 4 Flute, Stub Length -
Solid round tools, Solid Milling, Square
SOLID CARBIDE ENDMILLS US200-S4 4 Flute, Standard Length
● Suitable for general machining of stainless steel
(<280HB).
● Special edge design effectively solves the crumbs.
● Water，oil cooling are the best cooling methods.SKU: US200-S4 4 Flute, Standard Length -
Solid round tools, Solid Milling, Roughing, Square
SOLID CARBIDE ENDMILLS UPR100-S4 4 Flute Square End, With Roughing Geometry
Solid round tools, Solid Milling, Roughing, SquareSOLID CARBIDE ENDMILLS UPR100-S4 4 Flute Square End, With Roughing Geometry
- Suitable for Roughing of ordinary steel and cast iron materials (≤48HRC).
- Special edge chipbreaker treatment, suitable for rough machining of grooves and side walls of workpieces.
SKU: UPR100-S4 4 Flute Square End, with Roughing Geometry
There are no reviews yet.