roughing end mill
Roughing
Showing 1–30 of 32 results
-
Roughing, Solid Milling, Solid round tools
3 Flute, 38° Helix Medium Length Solid Carbide Roughing Endmills with 3xD Relieved Necks for Machining Aluminum ERC-E-3
Roughing, Solid Milling, Solid round tools3 Flute, 38° Helix Medium Length Solid Carbide Roughing Endmills with 3xD Relieved Necks for Machining Aluminum ERC-E-3
- 3 flute, 38° helix medium length solid carbide roughing endmills.
- Used for maximum stock removal on aluminum and other nonferrous materials.
- Number of flutes.
- Maximum ramping angle.
- C-Cylindrical, W-Weldon.
SKU: 3 Flute, 38° Helix Medium Length Solid Carbide Roughing Endmills with 3xD Relieved Necks for Machining Aluminum ERC-E-3 -
Roughing, Solid Milling, Solid round tools
3, 4, and 6 Flute, 30° and 38° Helix Solid Carbide Roughing Endmills with 3xD Relieved Neck for Alloy Steel ERF-A/E-3,4,6
Roughing, Solid Milling, Solid round tools3, 4, and 6 Flute, 30° and 38° Helix Solid Carbide Roughing Endmills with 3xD Relieved Neck for Alloy Steel ERF-A/E-3,4,6
- 3, 4, 6 flute, 30° and 38° helix, fine pitch, medium length solid carbide roughing endmills.
- Used for maximum stock removal of alloy steel.
SKU: 3, 4, and 6 Flute, 30° and 38° Helix Solid Carbide Roughing Endmills with 3xD Relieved Neck for Alloy Steel ERF-A/E-3,4,6 -
Roughing, Solid Milling, Solid round tools
AHNO Tungsten Carbide Roughers / Roughing Milling Cutters for Cast steel stainless steel wood plastic from D3.0 to D20.0mm
Roughing, Solid Milling, Solid round toolsAHNO Tungsten Carbide Roughers / Roughing Milling Cutters for Cast steel stainless steel wood plastic from D3.0 to D20.0mm
- AHNO Tungsten Carbide Roughers / Roughing Milling Cutters for Cast steel stainless steel wood plastic from D3.0 to D20.0mm.
SKU: 32827206027 -
Roughing, Solid Milling, Solid round tools
EC-E5L-CF 5 Flute, 38° Helix Medium Length (1xD) Variable Pitch Endmills
Roughing, Solid Milling, Solid round toolsEC-E5L-CF 5 Flute, 38° Helix Medium Length (1xD) Variable Pitch Endmills
- 5 flute, 38° helix with variable pitch endmills for roughing and finishing operations.
- High material removal rates chatter free.
- Used for machining alloyed and stainless steel, titanium and exotic materials.
- Full slot milling – up to 1XD.
SKU: EC-E5L-CF 5 Flute, 38° Helix Medium Length (1xD) Variable Pitch Endmills -
Corner Radius, Roughing, Solid Milling, Solid round tools
EC-H4L-CFR (relieved neck) 4 Flute Endmills with 3xD Relieved Necks, Assorted Radii
Corner Radius, Roughing, Solid Milling, Solid round toolsEC-H4L-CFR (relieved neck) 4 Flute Endmills with 3xD Relieved Necks, Assorted Radii
- 4 flute endmills with different helix (36° & 37°) and variable pitch for chatter dampening with assorted radii and relieved neck.
- Used for very high material removal rates roughing and finishing operations.
- Full slot milling-up to 2XD.
- Number of flutes.
- Maximum ramping angle.
- C-Cylindrical, W-Weldon.
SKU: EC-H4L-CFR (relieved neck) 4 Flute Endmills with 3xD Relieved Necks, Assorted Radii -
Roughing, Solid Milling, Solid round tools
EC-H4M-CF-E 4 Flute Endmills with Different Helix and Variable Pitch for Chatter Dampening
Roughing, Solid Milling, Solid round toolsEC-H4M-CF-E 4 Flute Endmills with Different Helix and Variable Pitch for Chatter Dampening
- 4 flute endmills with different helix (35° & 37°) and variable pitch for chatter dampening.
- Used for very high material removal rates roughing and finishing operations.
- Full slot milling-up to 2XD.
- Number of flutes.
- Maximum ramping angle.
- C-Cylindrical, W-Weldon.
SKU: EC-H4M-CF-E 4 Flute Endmills with Different Helix and Variable Pitch for Chatter Dampening -
Corner Radius, Roughing, Solid Milling, Solid round tools
EC-H4M-CFR 4 Flute Endmills with Different Helix and Variable Pitch for Chatter Dampening with Assorted Radii
Corner Radius, Roughing, Solid Milling, Solid round toolsEC-H4M-CFR 4 Flute Endmills with Different Helix and Variable Pitch for Chatter Dampening with Assorted Radii
- 4 flute endmills with different helix (35° & 37°) and variable pitch for chatter dampening with assorted radii.
- Used for very high material removal rates roughing and finishing operations.
- Full slot milling-up to 2XD.
- Number of flutes.
- Maximum ramping angle.
- C-Cylindrical, W-Weldon.
SKU: EC-H4M-CFR 4 Flute Endmills with Different Helix and Variable Pitch for Chatter Dampening with Assorted Radii -
Roughing, Solid Milling, Solid round tools
EC-H4S-CF Short 4 Flute Endmills with Different Helix and Variable Pitch for Chatter Dampening
Roughing, Solid Milling, Solid round toolsEC-H4S-CF Short 4 Flute Endmills with Different Helix and Variable Pitch for Chatter Dampening
- Short 4 flute endmills with different helix (36° & 40°) and variable pitch for chatter dampening, for very high material removal rates in roughing and finishing operations.
- Full slot milling up to 1XD.
- Number of flutes.
- Maximum ramping angle.
- C-Cylindrical, W-Weldon.
SKU: EC-H4S-CF Short 4 Flute Endmills with Different Helix and Variable Pitch for Chatter Dampening -
Roughing, Solid Milling, Solid round tools
EC-H4XL-CFR (relieved neck) 4 Flute Endmills with 4xD Relieved Necks, Assorted Radii
Roughing, Solid Milling, Solid round toolsEC-H4XL-CFR (relieved neck) 4 Flute Endmills with 4xD Relieved Necks, Assorted Radii
- 4 flute long endmills with different helix (35° & 37°) and variable pitch for chatter dampening with relieved neck.
- Used for very high material removal rates roughing and finishing operations.
- Full slot milling-up to 2XD.
- Number of flutes.
- Maximum ramping angle.
- C-Cylindrical, W-Weldon.
SKU: EC-H4XL-CFR (relieved neck) 4 Flute Endmills with 4xD Relieved Necks, Assorted Radii -
Corner Radius, Roughing, Solid Milling, Solid round tools
EC-H5M-CFR 5 Flute Endmills with Different Helix (36 – 38°) and Variable Pitch for Chatter Dampening with Assorted Radii
Corner Radius, Roughing, Solid Milling, Solid round toolsEC-H5M-CFR 5 Flute Endmills with Different Helix (36 – 38°) and Variable Pitch for Chatter Dampening with Assorted Radii
- 5 flute endmills with different helix and variable pitch for chatter dampening with assorted radii.
- Used for very high material removal rates roughing and finishing operations.
- Full slot milling-up to 1XD.
- Number of flutes.
- Maximum ramping angle.
- C-Cylindrical, W-Weldon.
SKU: EC-H5M-CFR 5 Flute Endmills with Different Helix (36 - 38°) and Variable Pitch for Chatter Dampening with Assorted Radii -
Corner Radius, Roughing, Solid Milling, Solid round tools
ECA-H3-CF Solid Carbide Endmills with Different Helix, Variable Pitch and 3, 4 and 5xD Relieved Necks for Machining Aluminum
Corner Radius, Roughing, Solid Milling, Solid round toolsECA-H3-CF Solid Carbide Endmills with Different Helix, Variable Pitch and 3, 4 and 5xD Relieved Necks for Machining Aluminum
- CHATTERFREE, 3 flute solid carbide endmills with 39-41° different helix, 3, 4 and 5xD neck relief for machining aluminum.
- Excellent chatter dampening ability.
- Used for both roughing and finishing.
- Number of flutes.
- Maximum ramping angle.
- C-Cylindrical.
SKU: ECA-H3-CF Solid Carbide Endmills with Different Helix, Variable Pitch and 3, 4 and 5xD Relieved Necks for Machining Aluminum -
Corner Radius, Roughing, Solid Milling, Solid round tools
ECA-H3-CF-C Solid Carbide Endmills with Different Helix, Variable Pitch, Coolant Holes and Neck Relief for Machining Aluminum
Corner Radius, Roughing, Solid Milling, Solid round toolsECA-H3-CF-C Solid Carbide Endmills with Different Helix, Variable Pitch, Coolant Holes and Neck Relief for Machining Aluminum
- CHATTERFREE, 3 flute solid carbide endmills with 39-41° different helix, relieved neck and coolant holes for machining aluminum.
- Excellent chatter dampening ability.
- Used for both roughing and finishing.
- Number of flutes.
- Maximum ramping angle.
- C-Cylindrical.
SKU: ECA-H3-CF-C Solid Carbide Endmills with Different Helix, Variable Pitch, Coolant Holes and Neck Relief for Machining Aluminum -
Corner Radius, Roughing, Solid Milling, Solid round tools
ECA-H4-CF Solid Carbide Endmills with Different Helix and Long Neck Relief for Machining Aluminum
Corner Radius, Roughing, Solid Milling, Solid round toolsECA-H4-CF Solid Carbide Endmills with Different Helix and Long Neck Relief for Machining Aluminum
- Chatter free 4 flute solid carbide endmills with 39-41° different helix and long neck relief for machining aluminum.
- Excellent chatter dampening ability.
- Used for both roughing and finishing.
- Number of flutes.
- Maximum ramping angle.
- C-Cylindrical.
SKU: ECA-H4-CF Solid Carbide Endmills with Different Helix and Long Neck Relief for Machining Aluminum -
Corner Radius, Roughing, Solid Milling, Solid round tools
ECAP-H3-CF Solid Carbide Endmills with Different Helix, Variable Pitch, Chip Splitters and Coolant Holes for Machining Aluminum
Corner Radius, Roughing, Solid Milling, Solid round toolsECAP-H3-CF Solid Carbide Endmills with Different Helix, Variable Pitch, Chip Splitters and Coolant Holes for Machining Aluminum
- Chatter free 4 flute solid carbide endmills with 39-41° different helix and long neck relief for machining aluminum.
- Excellent chatter dampening ability.
- Used for both roughing and finishing.
- Number of flutes.
- Maximum ramping angle.
- C-Cylindrical.
SKU: ECAP-H3-CF Solid Carbide Endmills with Different Helix, Variable Pitch, Chip Splitters and Coolant Holes for Machining Aluminum -
Roughing, Solid Milling, Solid round tools
ECP-E3L 3 Flute, 38° Helix Solid Carbide Roughing Endmills with 3xD Relieved Necks and Chip Splitting Cutting Edges
Roughing, Solid Milling, Solid round toolsECP-E3L 3 Flute, 38° Helix Solid Carbide Roughing Endmills with 3xD Relieved Necks and Chip Splitting Cutting Edges
- 3 flute, 38° helix medium length solid carbide roughing endmills with chip splitting cutting edges for high stock removal rates.
- Used for machining stainless steel and high temperature alloys.
- Most recommended for machining stainless steel.
SKU: ECP-E3L 3 Flute, 38° Helix Solid Carbide Roughing Endmills with 3xD Relieved Necks and Chip Splitting Cutting Edges -
Roughing, Solid Milling, Solid round tools
ECP-E4L 4 Flute, 38° Helix Solid Carbide Roughing Endmills with 3xD Relieved Necks and Chip Splitting Cutting Edges
Roughing, Solid Milling, Solid round toolsECP-E4L 4 Flute, 38° Helix Solid Carbide Roughing Endmills with 3xD Relieved Necks and Chip Splitting Cutting Edges
- 4 flute, 38° helix medium length solid carbide roughing endmills with chip splitting cutting edges for high stock removal rates.
- Used for machining stainless steel and high temperature alloys.
- Most recommended for machining stainless steel.
- Number of flutes.
- C-Cylindrical, W-Weldon.
SKU: ECP-E4L 4 Flute, 38° Helix Solid Carbide Roughing Endmills with 3xD Relieved Necks and Chip Splitting Cutting Edges -
Roughing, Solid Milling, Solid round tools
ECR-B-L 4-7 Flute, 45° Helix Solid Carbide Roughing Endmills with 3xD Relieved Necks
Roughing, Solid Milling, Solid round toolsECR-B-L 4-7 Flute, 45° Helix Solid Carbide Roughing Endmills with 3xD Relieved Necks
- 4-7 flute 45° helix, long reach (3xd) solid carbide roughing endmills.
- Used for high stock removal rates.
- Cannot be used for plunging application.
- Number of flutes.
- Maximum ramping angle.
- C-Cylindrical, W-Weldon.
SKU: ECR-B-L 4-7 Flute, 45° Helix Solid Carbide Roughing Endmills with 3xD Relieved Necks -
Corner Radius, Roughing, Solid Milling, Solid round tools
ECR-B-M/ECR-B-M…R 4-7 Flute, 45° Helix Medium Length (2xD) Solid Carbide Roughing Endmills
Corner Radius, Roughing, Solid Milling, Solid round toolsECR-B-M/ECR-B-M…R 4-7 Flute, 45° Helix Medium Length (2xD) Solid Carbide Roughing Endmills
- 4-7 flute, 45° helix medium length (2xd) solid carbide roughing endmills.
- Used for high stock removal rates.
- Cannot be used for plunging application.
- Number of flutes.
- Maximum ramping angle.
- C-Cylindrical, W-Weldon.
SKU: ECR-B-M/ECR-B-M...R 4-7 Flute, 45° Helix Medium Length (2xD) Solid Carbide Roughing Endmills -
Roughing, Solid Milling, Solid round tools
ECR-B-MF 4 and 6 Flute, 45° Helix Medium Length Solid Carbide Roughing Endmills for Materials up to 65 HRc
Roughing, Solid Milling, Solid round toolsECR-B-MF 4 and 6 Flute, 45° Helix Medium Length Solid Carbide Roughing Endmills for Materials up to 65 HRc
- Solid carbide roughing endmills with 4 and 6 flute, 45° helix, medium length (2xD).
- Used for high stock removal rates.
- Special design for hard (up to 65 HRc) materials and high temperature alloys.
- The rougher’s cutting edge profile has shallow serrations.
- A very durable design which leaves only a small amount of material for the finishing cut.
SKU: ECR-B-MF 4 and 6 Flute, 45° Helix Medium Length Solid Carbide Roughing Endmills for Materials up to 65 HRc -
Roughing, Solid Milling, Solid round tools
ECR-B-S 4-7 Flute, 45° Helix Short Length (1xD) Solid Carbide Roughing Endmills
Roughing, Solid Milling, Solid round toolsECR-B-S 4-7 Flute, 45° Helix Short Length (1xD) Solid Carbide Roughing Endmills
- 4-7 Flute, 45° Helix, Short Length (1xD) Solid Carbide Roughing Endmills 4-7 flute, 45° helix, short length (1xd) solid carbide roughing endmills.
- Used for high stock removal rates.
- Cannot be used for plunging application.
- Number of flutes.
- Maximum ramping angle.
- C-Cylindrical, W-Weldon.
SKU: ECR-B-S 4-7 Flute, 45° Helix Short Length (1xD) Solid Carbide Roughing Endmills -
Roughing, Solid Milling, Solid round tools
ECR-B-X 4-5 Flute, 45° Helix Solid Carbide Roughing Endmills with 4xD Relieved Necks
Roughing, Solid Milling, Solid round toolsECR-B-X 4-5 Flute, 45° Helix Solid Carbide Roughing Endmills with 4xD Relieved Necks
- 4-5 flute, 45° helix extra long reach (4xd) solid carbide roughing endmills.
- Used for high stock removal rates.
- Cannot be used for plunging application.
- Number of flutes.
- Maximum ramping angle.
- C-Cylindrical, W-Weldon.
SKU: ECR-B-X 4-5 Flute, 45° Helix Solid Carbide Roughing Endmills with 4xD Relieved Necks -
Corner Radius, Roughing, Solid Milling, Solid round tools
ECR-B3-R 3 Flute, 45° Helix Solid Carbide Roughing Endmills with 3xD Relieved Necks for High Stock Removal Rates of Aluminum
Corner Radius, Roughing, Solid Milling, Solid round toolsECR-B3-R 3 Flute, 45° Helix Solid Carbide Roughing Endmills with 3xD Relieved Necks for High Stock Removal Rates of Aluminum
- 3 flute, 45° helix solid carbide roughing endmills with 3xd relieved necks for high stock removal rates of aluminum.
- Number of flutes.
- Maximum ramping angle.
- C-Cylindrical, W-Weldon.
SKU: ECR-B3-R 3 Flute, 45° Helix Solid Carbide Roughing Endmills with 3xD Relieved Necks for High Stock Removal Rates of Aluminum -
Corner Radius, Roughing, Solid Milling, Solid round tools
ECR-B3-R-C 3 Flute, 45° Helix Solid Carbide Roughing Endmills with 3xD Relieved Necks and Coolant Channels for Aluminum
Corner Radius, Roughing, Solid Milling, Solid round toolsECR-B3-R-C 3 Flute, 45° Helix Solid Carbide Roughing Endmills with 3xD Relieved Necks and Coolant Channels for Aluminum
- 3 flute, 45° helix solid carbide roughing endmills with coolant channels directed to each cutting edge.
- Used for high stock removal rates on aluminum.
- Number of flutes.
- Maximum ramping angle.
- C-Cylindrical.
SKU: ECR-B3-R-C 3 Flute, 45° Helix Solid Carbide Roughing Endmills with 3xD Relieved Necks and Coolant Channels for Aluminum -
Roughing, Solid Milling, Solid round tools
ECR-T-M 4 Flute, 20° Helix Medium Length Solid Carbide Roughing Endmills for High Stock Removal Rates
Roughing, Solid Milling, Solid round toolsECR-T-M 4 Flute, 20° Helix Medium Length Solid Carbide Roughing Endmills for High Stock Removal Rates
- 4 flute, 20° helix medium length Solid carbide roughing endmills.
- Used for high stock removal rates on high temperature alloys (PH).
- Number of flutes.
- Maximum ramping angle.
- C-Cylindrical, W-Weldon.
SKU: ECR-T-M 4 Flute, 20° Helix Medium Length Solid Carbide Roughing Endmills for High Stock Removal Rates -
Corner Radius, Roughing, Solid Milling, Solid round tools
EFP-E4,5CF Solid Carbide Roughing Endmills with Chip Splitting Cutting Edges, Variable Pitch and Large Radius Frontal Edge
Corner Radius, Roughing, Solid Milling, Solid round toolsEFP-E4,5CF Solid Carbide Roughing Endmills with Chip Splitting Cutting Edges, Variable Pitch and Large Radius Frontal Edge
- 4, 5 flute 38° helix, solid carbide roughing endmills with chip splitting cutting edges, variable pitch (CHATTERFREE) and large radius frontal edge for high feed rates (FEEDMILL).
- Cannot be used for plunging application.
- Used for programming.
- Number of flutes.
- Maximum D.O.C. for high feed milling (FEEDMILL).
- Maximum ramping angle.
- C-Cylindrical.
SKU: EFP-E4,5CF Solid Carbide Roughing Endmills with Chip Splitting Cutting Edges, Variable Pitch and Large Radius Frontal Edge -
Roughing, Solid Milling, Solid round tools
EFS-B44 Combination of Roughing and Finishing Solid Carbide Endmills in a Single Tool
Roughing, Solid Milling, Solid round toolsEFS-B44 Combination of Roughing and Finishing Solid Carbide Endmills in a Single Tool
- Solid carbide endmills with 4 flute, medium length and 45° helix, featuring a combination of roughing and finishing in a single tool.
- Minimum width of cut for semi-finishing operation >= 0.05 x DC.
- IC300 should be mainly used for machining exotic materials.
SKU: EFS-B44 Combination of Roughing and Finishing Solid Carbide Endmills in a Single Tool -
Roughing, Solid Milling, Solid round tools
EFS-E44 Combination of Roughing and Finishing Solid Carbide Endmills with Variable Pitch for Chatter Free Milling
Roughing, Solid Milling, Solid round toolsEFS-E44 Combination of Roughing and Finishing Solid Carbide Endmills with Variable Pitch for Chatter Free Milling
- Combination of roughing and finishing solid carbide endmill in a single tool.
- 4 variable pitch flutes, 38° Helix, medium length.
- Provides finish surface at rough machining parameters.
- Reduces vibrations at high load applications.
- Minimum width of cut for semi-finishing operation >= 0.05 x DC.
SKU: EFS-E44 Combination of Roughing and Finishing Solid Carbide Endmills with Variable Pitch for Chatter Free Milling -
Roughing, Solid Milling, Solid round tools
HRC55 4 blade Roughing Endmills Cutter Alloy Coating Tungsten Steel Tool Cnc Regular Length Maching Milling Cutter For Metal
Roughing, Solid Milling, Solid round toolsHRC55 4 blade Roughing Endmills Cutter Alloy Coating Tungsten Steel Tool Cnc Regular Length Maching Milling Cutter For Metal
-
Tungsten steel base material, sturdy and durable, the new core blunt technology provides you with more stable, more powerful and cost-effective tungsten steel milling cutter
-
Nano-composite coating, the blade is covered with nano-composite coating, which can directly perform high-speed processing of heat-treated materials below 55 degrees, reducing the number of tool changes, improving machine tool utilization and saving production time
-
The 2 edge is mainly used for cutting grooves, and the 4 edge is mainly used for side milling and face milling. It is recommended to cut steel within HRC55 degrees
SKU: 4000261833544 -
