Metric
Showing 1–12 of 4503 results
-
-
Copy milling, contouring, Cut off, slot and groove milling, Indexable Tools, Milling Tools
2 Flute Chip Splitting Toroidal Solid Carbide Milling Heads MM HT-NCSR
Copy milling, contouring, Cut off, slot and groove milling, Indexable Tools, Milling Tools2 Flute Chip Splitting Toroidal Solid Carbide Milling Heads MM HT-NCSR
- 2 flute chip splitting toroidal solid carbide milling heads.
- Do not apply lubricant to the threaded connection.
- Number of flutes.
- Specially tailored radius range, available upon request.
SKU: 2 Flute Chip Splitting Toroidal Solid Carbide Milling Heads MM HT-NCSR -
Ball Nose, Solid Milling, Solid round tools
2 Flute High Precision Solid Carbide Ball Nose Endmills for Machining Aluminum EBA-B2
Ball Nose, Solid Milling, Solid round tools2 Flute High Precision Solid Carbide Ball Nose Endmills for Machining Aluminum EBA-B2
- 2 flute high precision solid carbide ball nose endmills for machining aluminum.
- Number of flutes.
- C-Cylindrical.
SKU: 2 Flute High Precision Solid Carbide Ball Nose Endmills for Machining Aluminum EBA-B2 -
Copy milling, contouring, Indexable Tools, Milling Tools, Shoulder milling tools
2 Flute Toroidal Solid Carbide Milling Heads MM HT-NWFR
Copy milling, contouring, Indexable Tools, Milling Tools, Shoulder milling tools2 Flute Toroidal Solid Carbide Milling Heads MM HT-NWFR
- MULTI-MASTER, 2 flute, toroidal, solid carbide milling heads with a side tangential wiper.
- Used for tall shoulders or deep cavities, producing high surface finish.
- Do not apply lubricant to the threaded connection.
- Number of flutes.
- Specially tailored radius range, available upon request.
SKU: 2 Flute Toroidal Solid Carbide Milling Heads MM HT-NWFR -
Solid Milling, Solid round tools, Square
2 Flute, 30 and 45° Helix Medium Length Solid Carbide Slot / Drill Endmills EC-A-2
Solid Milling, Solid round tools, Square2 Flute, 30 and 45° Helix Medium Length Solid Carbide Slot / Drill Endmills EC-A-2
- 2 flute, 30 and 45° helix medium length solid carbide slot / drill endmills.
- Number of flutes.
- Maximum ramping angle.
- C-Cylindrical, W-Weldon.
SKU: 2 Flute, 30 and 45° Helix Medium Length Solid Carbide Slot / Drill Endmills EC-A-2 -
Ball Nose, Corner Radius, Solid Milling, Solid round tools
2 Flute, 30° Helix Medium Length Solid Carbide Miniature Ball Nose Endmills EBM-A-2
Ball Nose, Corner Radius, Solid Milling, Solid round tools2 Flute, 30° Helix Medium Length Solid Carbide Miniature Ball Nose Endmills EBM-A-2
- 2 flute, 30° helix medium length solid carbide miniature ball nose endmills.
- Number of flutes.
- C-Cylindrical.
SKU: 2 Flute, 30° Helix Medium Length Solid Carbide Miniature Ball Nose Endmills EBM-A-2 -
Solid Milling, Solid round tools, Square
2 Flute, 30° Helix Medium Length Solid Carbide Slot / Drill Endmills with Chamfered Corners ECC-A-2
Solid Milling, Solid round tools, Square2 Flute, 30° Helix Medium Length Solid Carbide Slot / Drill Endmills with Chamfered Corners ECC-A-2
- 2 flute, 30° helix medium length solid carbide slot / drill endmills with chamfered corners.
- Number of flutes.
- Maximum ramping angle.
- C-Cylindrical, W-Weldon.
SKU: 2 Flute, 30° Helix Medium Length Solid Carbide Slot / Drill Endmills with Chamfered Corners ECC-A-2 -
Ball Nose, Solid Milling, Solid round tools
2 Flute, 30° Helix Short Solid Carbide Ball Nose Endmills EB-A-2
Ball Nose, Solid Milling, Solid round tools2 Flute, 30° Helix Short Solid Carbide Ball Nose Endmills EB-A-2
- 2 flute, 30° helix short solid carbide ball nose endmills.
- Short and stable design for profiling (roughing).
- Number of flutes.
- C-Cylindrical.
SKU: 2 Flute, 30° Helix Short Solid Carbide Ball Nose Endmills EB-A-2 -
Ball Nose, Corner Radius, Solid Milling, Solid round tools
2 Flute, 30° Helix Spherical Long Solid Carbide Ball Nose Endmills for Materials up to 65 HRc ESB-A2
Ball Nose, Corner Radius, Solid Milling, Solid round tools2 Flute, 30° Helix Spherical Long Solid Carbide Ball Nose Endmills for Materials up to 65 HRc ESB-A2
- 2 flute, 30° helix spherical long solid carbide ball nose endmills.
- Used for materials up to 65 HRc.
- Number of flutes.
- C-Cylindrical.
SKU: 2 Flute, 30° Helix Spherical Long Solid Carbide Ball Nose Endmills for Materials up to 65 HRc ESB-A2 -
Solid Milling, Solid round tools, Square
2 Flute, 45° Helix Medium Length Solid Carbide Endmills for Machining Aluminum ECA-B-2
Solid Milling, Solid round tools, Square2 Flute, 45° Helix Medium Length Solid Carbide Endmills for Machining Aluminum ECA-B-2
- 2 flute, 45° helix medium length solid carbide endmills for machining aluminum.
- Number of flutes.
- Maximum ramping angle.
- C-Cylindrical.
SKU: 2 Flute, 45° Helix Medium Length Solid Carbide Endmills for Machining Aluminum ECA-B-2 -
Solid Milling, Solid round tools, Square
2 Flute, 55° Helix Medium Length Solid Carbide Endmills for Machining Aluminum ECA-F-2
Solid Milling, Solid round tools, Square2 Flute, 55° Helix Medium Length Solid Carbide Endmills for Machining Aluminum ECA-F-2
-
2 flute, 55° helix medium length solid carbide endmills.
-
Used for machining aluminum.
- Number of flutes.
- Maximum ramping angle.
- C-Cylindrical.
SKU: 2 Flute, 55° Helix Medium Length Solid Carbide Endmills for Machining Aluminum ECA-F-2 -