(1) Check according to specific insert data
(2) Check according to specific insert data
(3) Cutting edge radius on rotating tool
(4) Minimum cutting width
(5) Maximum cutting width
Indexable Tools, Internal grooving, Parting And Grooving Tools
MG Internal Grooving, Turning and Threading Bars
Availability:
200 in stock
- Internal Grooving, Turning and Threading Bars.
- The same tool applies on right and left machining.
Based on 0 reviews
Be the first to review “MG Internal Grooving, Turning and Threading Bars”
You may also like…
-
Indexable Tools, THREADING TOOLS, Threading Inserts
GIQR/L-MT Internal Threading Inserts with a 60° Partial Profile for Threading in 8 mm and Larger Holes
Indexable Tools, THREADING TOOLS, Threading InsertsGIQR/L-MT Internal Threading Inserts with a 60° Partial Profile for Threading in 8 mm and Larger Holes
- Internal Threading Inserts with a 60° Partial Profile for Threading in 8 mm and Larger Holes.
- Can be used for thread milling by circular interpolation.
- Pitch max 0.19xD.
- D-diameter of thread.
SKU: GIQR/L-MT Internal Threading Inserts with a 60° Partial Profile for Threading in 8 mm and Larger Holes -
Indexable Tools, Parting And Grooving Tools, Grooving Inserts
GIQR/L 11-15 Precision Ground Single-Ended Inserts for Internal Deep Grooving and Turning
Indexable Tools, Parting And Grooving Tools, Grooving InsertsGIQR/L 11-15 Precision Ground Single-Ended Inserts for Internal Deep Grooving and Turning
- Precision Ground Single-Ended Inserts for Internal Deep Grooving and Turning.
- Comply to retaining rings DIN 471/472.
- Can be used for groove milling by circular interpolation.
SKU: GIQR/L 11-15 Precision Ground Single-Ended Inserts for Internal Deep Grooving and Turning -
Indexable Tools, THREADING TOOLS, Threading Inserts
GIQR/L-WT Internal Inserts with Whitworth Partial Profile for Threading in 8 mm and Larger Holes
Indexable Tools, THREADING TOOLS, Threading InsertsGIQR/L-WT Internal Inserts with Whitworth Partial Profile for Threading in 8 mm and Larger Holes
- Internal Inserts with Whitworth Partial Profile for Threading in 8 mm and Larger Holes.
- Can be used for thread milling by circular interpolation.
- TPI min D/5.9.
- D-diameter of thread (pitch max<=W).
SKU: GIQR/L-WT Internal Inserts with Whitworth Partial Profile for Threading in 8 mm and Larger Holes
There are no reviews yet.