• (1) Holes for inserting a pin, used to facilitate radial adjustment of the sleeve (pin not supplied)
On a lathe the eccenter sleeve can shift the drill’s
axis to coincide with the spindle axis.
The eccentric sleeve enables alignment of the drill’s axis with the spindle
axis within a 0.2 mm range (turn the sleeve counterclockwise to raise it).
Accessories for Toolholder, Tool Holders
Drilling Eccenter Sleeves Bushings for Enlarging or Reducing DR Nominal Drilling Diameters by Shifting the Drill Off-Center
Availability:
200 in stock
- Bushings for Enlarging or Reducing DR Nominal Drilling Diameters by Shifting the Drill Off-Center.
Based on 0 reviews
Be the first to review “Drilling Eccenter Sleeves Bushings for Enlarging or Reducing DR Nominal Drilling Diameters by Shifting the Drill Off-Center”
Related products
-
Clamping Technology, Tool Holders, DIN 69893 HSK-A, HSK-E, HSK-F
HSK100A ER Collet Chucks
- Tool holding device: HSK 63A-ER.
- Bore holes for data carriers according to DIN 69893.
- Fine balanced at G 2.5 at 25,000 rpm.
- High runout accuracy (< 0.003 mm).
- Highest rigidity.
- Highest clamping forces.
SKU: HSK100A ER Collet Chucks -
Clamping Technology, Tool Holders, Slotting Cutter Adapters, JIS (MAS 403) BT30/BT40/BT50
BT 2° Side Lock Holders
Clamping Technology, Tool Holders, Slotting Cutter Adapters, JIS (MAS 403) BT30/BT40/BT50BT 2° Side Lock Holders
- Tool holding device: BT30-50.
- Bore holes for data carriers according to JIS B6339.
- Run-out accuracy ≤ 0.003 mm measured from taper
to D1. - Balancing grade G2.5 at 25,000 RPM or Umax < 1 gmm.
SKU: BT 2° Side Lock Holders -
Clamping Technology, Tool Holders, Shrink Fit Chuck, DIN 69893 HSK-A, HSK-E, HSK-F
HSK-A Shrink Fit Toolhoders
Clamping Technology, Tool Holders, Shrink Fit Chuck, DIN 69893 HSK-A, HSK-E, HSK-FHSK-A Shrink Fit Toolhoders
- Tool holding device: HSK 63A.
- Bore holes for data carriers according to DIN 69893.
- High runout accuracy.
- Extreme clamping torque.
- Short chamfer.
- Cool Jet on request.
- Low tendency towards vibrations.
- Slim design at the top.
- Very rigid shank.
SKU: HSK-A Shrink Fit Toolhoders -
Clamping Technology, Tool Holders, Weldon Tool Holder, DIN 69893 HSK-A, HSK-E, HSK-F
Side Lock Holders
Clamping Technology, Tool Holders, Weldon Tool Holder, DIN 69893 HSK-A, HSK-E, HSK-FSide Lock Holders
- Tool holding device: HSK 63-100.
- Bore holes for data carriers according to DIN 69893.
- Run-out accuracy ≤ 0.003 mm measured from taper
to D1 - Balancing grade G2.5 at 25,000 RPM or Umax < 1 gmm
SKU: Side Lock Holders
There are no reviews yet.