Features
- Wide range of widths (from 14 up to 26 mm w.o.c)
- Soft cut with the positive-shaped inserts
- Including FDN (flanged type) and SDN (disc type) slot milling cutters
- Low power consumption and heat generation
Indexable Tools, Milling Inserts, Milling Tools
LNKX/LNMT 1506PNTN/ PN-N MM Milling Inserts
Availability:
500 in stock
- Tangentially clamped insert with 4 L.H. and 4 R.H. cutting edges.
- Reinforced negative land for unfavorable conditions.
- Enables high feed rates on grey and nodular cast iron.
| Brands | |
|---|---|
| Units of length | |
| Workpiece Material | Cast Iron (K), Hardened Steel (H), Heat-resistant Alloy and Titanium Alloy (S), Stainless Steel (M), Steel (P) |
Based on 0 reviews
Be the first to review “LNKX/LNMT 1506PNTN/ PN-N MM Milling Inserts”
You may also like…
-
Indexable Tools, Milling Tools, Cut off, slot and groove milling, Shoulder milling tools
SDN-CALN15 Full Slot Disk Type Slotting Cutters with Cartridges Carrying Tangentially Mounted LN.. 1506.. Inserts
Indexable Tools, Milling Tools, Cut off, slot and groove milling, Shoulder milling toolsSDN-CALN15 Full Slot Disk Type Slotting Cutters with Cartridges Carrying Tangentially Mounted LN.. 1506.. Inserts
- Full Slot Disk Type Slotting Cutters with Cartridges Carrying Tangentially Mounted LN.. 1506.. Inserts.
- Each cutter body can be changed into full slot, bottom or top milling configuration by mounting the cartridges accordingly.
- Half of the inserts are used on right-hand cartridges and half on left-hand cartridges.
- Gang-mill assembly SDN and left-hand SSB cutters feature two keyways.
- To reduce vibration, it is recommended to assemble gang-mills with alternating keyway position.
SKU: SDN-CALN15 Full Slot Disk Type Slotting Cutters with Cartridges Carrying Tangentially Mounted LN.. 1506.. Inserts -
Indexable Tools, Cut off, slot and groove milling, Face milling, Shoulder milling tools
FDN-CALN15 Full Slot Adjustable Slotting Cutters with Cartridges Carrying LN.. 1506… Inserts (18.9-25.6 mm width range)
Indexable Tools, Cut off, slot and groove milling, Face milling, Shoulder milling toolsFDN-CALN15 Full Slot Adjustable Slotting Cutters with Cartridges Carrying LN.. 1506… Inserts (18.9-25.6 mm width range)
- Full Slot Adjustable Slotting Cutters with Cartridges Carrying LN.. 1506… Inserts (18.9-25.6 mm width range).
- Each cutter body can be changed into full slot, bottom or top milling configuration, by mounting the cartridges accordingly.
- Minimum cutting width.
- The cutter will be set to the minimum width range, unless a specific width is requested by the user.
- Maximum cutting width.
- Cutting depth maximum.
- Number of inserts.
SKU: FDN-CALN15 Full Slot Adjustable Slotting Cutters with Cartridges Carrying LN.. 1506... Inserts (18.9-25.6 mm width range) -
Indexable Tools, Milling Tools, Cut off, slot and groove milling, Face milling, Shoulder milling tools
90° Face Mills Carrying LN..1506… Tangentially Clamped Inserts F90LN-N15
Indexable Tools, Milling Tools, Cut off, slot and groove milling, Face milling, Shoulder milling tools90° Face Mills Carrying LN..1506… Tangentially Clamped Inserts F90LN-N15
- 90° face mills carrying LN..1506… tangentially clamped inserts.
- Left-hand cutters are designated by a red groove.
- Number of inserts.
SKU: 90° Face Mills Carrying LN..1506... Tangentially Clamped Inserts F90LN-N15 -
Indexable Tools, Milling Tools, Shoulder milling tools
SSB-LN15-R/L Single-Side Cutting, Disk Type Slotting Cutters
Indexable Tools, Milling Tools, Shoulder milling toolsSSB-LN15-R/L Single-Side Cutting, Disk Type Slotting Cutters
- Single-Side Cutting, Disk Type Slotting Cutters.
-
Note: Left-hand cutters are designated by a yellow groove.
- Number of inserts.
- Cutting depth maximum.
SKU: SSB-LN15-R/L Single-Side Cutting, Disk Type Slotting Cutters
Related products
-
Indexable Tools, Boring and Reaming Tools, Fine boring tools
CBH-M Boring Tool For Pin Turning
- Each boring head with three different sizes insert holders for different boring ranges.
- Standard insert holder for inserts with lead angle 3°，for a better working performance during bling blind hole boring.
- Insert holder can be mounted in opposite direction to back boring.
- Better connection between insert holder and tool body provides higher tool prigidty and working performance.
- AII DCK-CBH fine boring tools are with internal cooling design,which increases the surface finish and inserts tool life.
SKU: CBH-M Boring Tool For Pin Turning -
Indexable Tools, Boring and Reaming Tools, Fine boring tools
CBH-L Boring Tool For Pin Turning （Large Diameter)
Indexable Tools, Boring and Reaming Tools, Fine boring toolsCBH-L Boring Tool For Pin Turning （Large Diameter)
- Each boring head with three different sizes insert holders for different boring ranges.
- Standard insert holder for inserts with lead angle 3°，for a better working performance during bling blind hole boring.
- Insert holder can be mounted in opposite direction to back boring.
- Better connection between insert holder and tool body provides higher tool prigidty and working performance.
- AII DCK-CBH fine boring tools are with internal cooling design,which increases the surface finish and inserts tool life.
SKU: CBH-L Boring Tool For Pin Turning （Large Diameter) -
Indexable Tools, Boring and Reaming Tools, Fine boring tools
FBH63P Micro-Flnishing Boring Kit
- Adjustment Precision 0.002 mm on Diameter
- One Boring Body With Ineert Holder or Boring Bar Can Be For Boing And Back Boring
- Standaed insert HoIder For Inserts With lead Angle 3°，For a Better Working Performance During Blind Hole Boring.
- The extensive Area Serrated With connection Between insert Holder And Tool Body Provides Higer Tool Rigity And Working Performance.
- All DCK-FBH Fine Boring Tools Are With internal Cooling Design,Which increases The Surface Finish And inserts Tool Life
SKU: Micro-Flnishing Boring Kit -
Indexable Tools, Boring and Reaming Tools, Fine boring tools
FBH Micro-boring Bar
- Adjustment precision 0.002 mm diameter.
- One boring body with insert hoder or boring bar can be for boring and back boring.
- Standard insert holder for inserts with lead 3°，for a better working performance during bling hole boring.
- The extensive area serrated with connection between insert holder and tool body provides higher tool rigidity and working performance.
- All DCK-FBH fine boring tools are with intemal cooling design,which increases the surface finish and inserts tool life.
SKU: FBH Micro-boring Bar
There are no reviews yet.