SKU: ECA-H3-CF Solid Carbide Endmills with Different Helix, Variable Pitch and 3, 4 and 5xD Relieved Necks for Machining Aluminum
Categories: Corner Radius, Solid Milling, Solid round tools
Corner Radius, Solid Milling, Solid round tools
ECA-H3-CF Solid Carbide Endmills with Different Helix, Variable Pitch and 3, 4 and 5xD Relieved Necks for Machining Aluminum
Availability:
200 in stock
- Solid Carbide Endmills with different Helix, variable pitch and 3, 4 and 5xD relieved necks for machining aluminum.
- Number of flutes.
- Maximum ramping angle.
- C-Cylindrical.
| Brands | |
|---|---|
| Units of length | |
| Workpiece Material |
Based on 0 reviews
Be the first to review “ECA-H3-CF Solid Carbide Endmills with Different Helix, Variable Pitch and 3, 4 and 5xD Relieved Necks for Machining Aluminum”
Related products
-
Solid round tools, Solid Milling, Square
SOLID CARBIDE ENDMILLS UA100-S3 3 Flute, Standard Length
● Suitable for aluminum alloy (Si ≤ 12%) and copper alloy (< 200HB) general
processing.
● Special edge design prevents vibration and effectively solves the crumbs.
● Water cooling is the best cooling method.SKU: UA100-S3 3 Flute, Standard Length -
Solid round tools, Solid Milling, Square
SOLID CARBIDE ENDMILLS US300-SS4 4 Flute, Stub Length
● Suitable for rough milling, semi-finishing and finishing of stainless
steel(<280HB).
● Design for the small depth/large width in face milling, large depth/
small width in side milling, less than 0.3D inshallow slotting.SKU: US300-SS4 4 Flute, Stub Length -
Solid round tools, Solid Milling, Square
SOLID CARBIDE ENDMILLS SS200-CS4 4 Flute, Stub Length With Variable Helix
Solid round tools, Solid Milling, SquareSOLID CARBIDE ENDMILLS SS200-CS4 4 Flute, Stub Length With Variable Helix
● Suitable for high efficiency efficient rough milling and
semi-finishing milling of stainless steel（＜280HB）.
● Variable Bottom edge variation and unequal helix angle
and unequal flute pitch have with excellent anti-vibration
capacity, and ensure high surface precision.
● Applicable for high efficiencyt machining at large cutting
depth (ap), large cutting width (ae), with high metal removal
rate.SKU: SS200-CS4 4 Flute, Stub Length with variable Helix -
Solid round tools, Solid Milling, Roughing, Square
SOLID CARBIDE ENDMILLS UPR100-S4 4 Flute Square End, With Roughing Geometry
Solid round tools, Solid Milling, Roughing, SquareSOLID CARBIDE ENDMILLS UPR100-S4 4 Flute Square End, With Roughing Geometry
- Suitable for Roughing of ordinary steel and cast iron materials (≤48HRC).
- Special edge chipbreaker treatment, suitable for rough machining of grooves and side walls of workpieces.
SKU: UPR100-S4 4 Flute Square End, with Roughing Geometry
There are no reviews yet.