Solid round tools
Showing 481–510 of 1124 results
-
Solid Milling, Solid round tools, Square
EC-H-CF 6-20 Flute Endmills with Different Helix and Variable Pitch for CHATTERFREE High Speed Finish Milling
Solid Milling, Solid round tools, SquareEC-H-CF 6-20 Flute Endmills with Different Helix and Variable Pitch for CHATTERFREE High Speed Finish Milling
- 6-20 flute endmills with different helix and variable pitch, for CHATTERFREE high speed / trochoidal milling and finishing operations.
- Can machine at radial width of cut (ae) of up to 0.06xD.
SKU: EC-H-CF 6-20 Flute Endmills with Different Helix and Variable Pitch for CHATTERFREE High Speed Finish Milling -
Corner Radius, Roughing, Solid Milling, Solid round tools
EC-H4L-CFR (relieved neck) 4 Flute Endmills with 3xD Relieved Necks, Assorted Radii
Corner Radius, Roughing, Solid Milling, Solid round toolsEC-H4L-CFR (relieved neck) 4 Flute Endmills with 3xD Relieved Necks, Assorted Radii
- 4 flute endmills with different helix (36° & 37°) and variable pitch for chatter dampening with assorted radii and relieved neck.
- Used for very high material removal rates roughing and finishing operations.
- Full slot milling-up to 2XD.
- Number of flutes.
- Maximum ramping angle.
- C-Cylindrical, W-Weldon.
SKU: EC-H4L-CFR (relieved neck) 4 Flute Endmills with 3xD Relieved Necks, Assorted Radii -
Roughing, Solid Milling, Solid round tools
EC-H4M-CF-E 4 Flute Endmills with Different Helix and Variable Pitch for Chatter Dampening
Roughing, Solid Milling, Solid round toolsEC-H4M-CF-E 4 Flute Endmills with Different Helix and Variable Pitch for Chatter Dampening
- 4 flute endmills with different helix (35° & 37°) and variable pitch for chatter dampening.
- Used for very high material removal rates roughing and finishing operations.
- Full slot milling-up to 2XD.
- Number of flutes.
- Maximum ramping angle.
- C-Cylindrical, W-Weldon.
SKU: EC-H4M-CF-E 4 Flute Endmills with Different Helix and Variable Pitch for Chatter Dampening -
Corner Radius, Roughing, Solid Milling, Solid round tools
EC-H4M-CFR 4 Flute Endmills with Different Helix and Variable Pitch for Chatter Dampening with Assorted Radii
Corner Radius, Roughing, Solid Milling, Solid round toolsEC-H4M-CFR 4 Flute Endmills with Different Helix and Variable Pitch for Chatter Dampening with Assorted Radii
- 4 flute endmills with different helix (35° & 37°) and variable pitch for chatter dampening with assorted radii.
- Used for very high material removal rates roughing and finishing operations.
- Full slot milling-up to 2XD.
- Number of flutes.
- Maximum ramping angle.
- C-Cylindrical, W-Weldon.
SKU: EC-H4M-CFR 4 Flute Endmills with Different Helix and Variable Pitch for Chatter Dampening with Assorted Radii -
Roughing, Solid Milling, Solid round tools
EC-H4S-CF Short 4 Flute Endmills with Different Helix and Variable Pitch for Chatter Dampening
Roughing, Solid Milling, Solid round toolsEC-H4S-CF Short 4 Flute Endmills with Different Helix and Variable Pitch for Chatter Dampening
- Short 4 flute endmills with different helix (36° & 40°) and variable pitch for chatter dampening, for very high material removal rates in roughing and finishing operations.
- Full slot milling up to 1XD.
- Number of flutes.
- Maximum ramping angle.
- C-Cylindrical, W-Weldon.
SKU: EC-H4S-CF Short 4 Flute Endmills with Different Helix and Variable Pitch for Chatter Dampening -
Roughing, Solid Milling, Solid round tools
EC-H4XL-CFR (relieved neck) 4 Flute Endmills with 4xD Relieved Necks, Assorted Radii
Roughing, Solid Milling, Solid round toolsEC-H4XL-CFR (relieved neck) 4 Flute Endmills with 4xD Relieved Necks, Assorted Radii
- 4 flute long endmills with different helix (35° & 37°) and variable pitch for chatter dampening with relieved neck.
- Used for very high material removal rates roughing and finishing operations.
- Full slot milling-up to 2XD.
- Number of flutes.
- Maximum ramping angle.
- C-Cylindrical, W-Weldon.
SKU: EC-H4XL-CFR (relieved neck) 4 Flute Endmills with 4xD Relieved Necks, Assorted Radii -
Corner Radius, Roughing, Solid Milling, Solid round tools
EC-H5M-CFR 5 Flute Endmills with Different Helix (36 – 38°) and Variable Pitch for Chatter Dampening with Assorted Radii
Corner Radius, Roughing, Solid Milling, Solid round toolsEC-H5M-CFR 5 Flute Endmills with Different Helix (36 – 38°) and Variable Pitch for Chatter Dampening with Assorted Radii
- 5 flute endmills with different helix and variable pitch for chatter dampening with assorted radii.
- Used for very high material removal rates roughing and finishing operations.
- Full slot milling-up to 1XD.
- Number of flutes.
- Maximum ramping angle.
- C-Cylindrical, W-Weldon.
SKU: EC-H5M-CFR 5 Flute Endmills with Different Helix (36 - 38°) and Variable Pitch for Chatter Dampening with Assorted Radii -
Corner Radius, Roughing, Solid Milling, Solid round tools
ECA-H3-CF Solid Carbide Endmills with Different Helix, Variable Pitch and 3, 4 and 5xD Relieved Necks for Machining Aluminum
Corner Radius, Roughing, Solid Milling, Solid round toolsECA-H3-CF Solid Carbide Endmills with Different Helix, Variable Pitch and 3, 4 and 5xD Relieved Necks for Machining Aluminum
- CHATTERFREE, 3 flute solid carbide endmills with 39-41° different helix, 3, 4 and 5xD neck relief for machining aluminum.
- Excellent chatter dampening ability.
- Used for both roughing and finishing.
- Number of flutes.
- Maximum ramping angle.
- C-Cylindrical.
SKU: ECA-H3-CF Solid Carbide Endmills with Different Helix, Variable Pitch and 3, 4 and 5xD Relieved Necks for Machining Aluminum -
Corner Radius, Solid Milling, Solid round tools
ECA-H3-CF Solid Carbide Endmills with Different Helix, Variable Pitch and 3, 4 and 5xD Relieved Necks for Machining Aluminum
Corner Radius, Solid Milling, Solid round toolsECA-H3-CF Solid Carbide Endmills with Different Helix, Variable Pitch and 3, 4 and 5xD Relieved Necks for Machining Aluminum
- Solid Carbide Endmills with different Helix, variable pitch and 3, 4 and 5xD relieved necks for machining aluminum.
- Number of flutes.
- Maximum ramping angle.
- C-Cylindrical.
SKU: ECA-H3-CF Solid Carbide Endmills with Different Helix, Variable Pitch and 3, 4 and 5xD Relieved Necks for Machining Aluminum -
Corner Radius, Roughing, Solid Milling, Solid round tools
ECA-H3-CF-C Solid Carbide Endmills with Different Helix, Variable Pitch, Coolant Holes and Neck Relief for Machining Aluminum
Corner Radius, Roughing, Solid Milling, Solid round toolsECA-H3-CF-C Solid Carbide Endmills with Different Helix, Variable Pitch, Coolant Holes and Neck Relief for Machining Aluminum
- CHATTERFREE, 3 flute solid carbide endmills with 39-41° different helix, relieved neck and coolant holes for machining aluminum.
- Excellent chatter dampening ability.
- Used for both roughing and finishing.
- Number of flutes.
- Maximum ramping angle.
- C-Cylindrical.
SKU: ECA-H3-CF-C Solid Carbide Endmills with Different Helix, Variable Pitch, Coolant Holes and Neck Relief for Machining Aluminum -
Corner Radius, Roughing, Solid Milling, Solid round tools
ECA-H4-CF Solid Carbide Endmills with Different Helix and Long Neck Relief for Machining Aluminum
Corner Radius, Roughing, Solid Milling, Solid round toolsECA-H4-CF Solid Carbide Endmills with Different Helix and Long Neck Relief for Machining Aluminum
- Chatter free 4 flute solid carbide endmills with 39-41° different helix and long neck relief for machining aluminum.
- Excellent chatter dampening ability.
- Used for both roughing and finishing.
- Number of flutes.
- Maximum ramping angle.
- C-Cylindrical.
SKU: ECA-H4-CF Solid Carbide Endmills with Different Helix and Long Neck Relief for Machining Aluminum -
Corner Radius, Roughing, Solid Milling, Solid round tools
ECAP-H3-CF Solid Carbide Endmills with Different Helix, Variable Pitch, Chip Splitters and Coolant Holes for Machining Aluminum
Corner Radius, Roughing, Solid Milling, Solid round toolsECAP-H3-CF Solid Carbide Endmills with Different Helix, Variable Pitch, Chip Splitters and Coolant Holes for Machining Aluminum
- Chatter free 4 flute solid carbide endmills with 39-41° different helix and long neck relief for machining aluminum.
- Excellent chatter dampening ability.
- Used for both roughing and finishing.
- Number of flutes.
- Maximum ramping angle.
- C-Cylindrical.
SKU: ECAP-H3-CF Solid Carbide Endmills with Different Helix, Variable Pitch, Chip Splitters and Coolant Holes for Machining Aluminum -
Corner Radius, Solid Milling, Solid round tools
ECK-H4M-CFR Endmills with Different Helix, Chamfered Edges and Variable Pitch for Chatter Dampening on Titanium
Corner Radius, Solid Milling, Solid round toolsECK-H4M-CFR Endmills with Different Helix, Chamfered Edges and Variable Pitch for Chatter Dampening on Titanium
- 4 flute endmills with different helix (35° & 37°), chamfered cutting edges and variable pitch for chatter dampening with assorted radii.
- Used for high titanium removal rates. Full slot milling-up to 2XD.
SKU: ECK-H4M-CFR Endmills with Different Helix, Chamfered Edges and Variable Pitch for Chatter Dampening on Titanium -
Corner Radius, Solid Milling, Solid round tools
ECK-H7/9-CFR 7 and 9 Flute Endmills with Different Helix and Variable Pitch for Chatter Dampening on Titanium
Corner Radius, Solid Milling, Solid round toolsECK-H7/9-CFR 7 and 9 Flute Endmills with Different Helix and Variable Pitch for Chatter Dampening on Titanium
- 7 and 9 flute endmills with different helix and variable pitch for chatter dampening with assorted radii.
- Used for high titanium removal rates.
- Can machine at radial width of cut (AE) of up to 0.10xD.
SKU: ECK-H7/9-CFR 7 and 9 Flute Endmills with Different Helix and Variable Pitch for Chatter Dampening on Titanium -
Solid Milling, Solid round tools, Square
Economical Type 2 Flute, 30° Helix Center Cutting Short Solid Carbide Endmills EC-A2 (economical-short)
Solid Milling, Solid round tools, SquareEconomical Type 2 Flute, 30° Helix Center Cutting Short Solid Carbide Endmills EC-A2 (economical-short)
- SOLIDECO – economical type 2 flute, 30° helix center cutting short solid carbide endmills.
- Number of flutes.
- Maximum ramping angle.
- W-Weldon.
SKU: Economical Type 2 Flute, 30° Helix Center Cutting Short Solid Carbide Endmills EC-A2 (economical-short) -
Roughing, Solid Milling, Solid round tools
ECP-E3L 3 Flute, 38° Helix Solid Carbide Roughing Endmills with 3xD Relieved Necks and Chip Splitting Cutting Edges
Roughing, Solid Milling, Solid round toolsECP-E3L 3 Flute, 38° Helix Solid Carbide Roughing Endmills with 3xD Relieved Necks and Chip Splitting Cutting Edges
- 3 flute, 38° helix medium length solid carbide roughing endmills with chip splitting cutting edges for high stock removal rates.
- Used for machining stainless steel and high temperature alloys.
- Most recommended for machining stainless steel.
SKU: ECP-E3L 3 Flute, 38° Helix Solid Carbide Roughing Endmills with 3xD Relieved Necks and Chip Splitting Cutting Edges -
Roughing, Solid Milling, Solid round tools
ECP-E4L 4 Flute, 38° Helix Solid Carbide Roughing Endmills with 3xD Relieved Necks and Chip Splitting Cutting Edges
Roughing, Solid Milling, Solid round toolsECP-E4L 4 Flute, 38° Helix Solid Carbide Roughing Endmills with 3xD Relieved Necks and Chip Splitting Cutting Edges
- 4 flute, 38° helix medium length solid carbide roughing endmills with chip splitting cutting edges for high stock removal rates.
- Used for machining stainless steel and high temperature alloys.
- Most recommended for machining stainless steel.
- Number of flutes.
- C-Cylindrical, W-Weldon.
SKU: ECP-E4L 4 Flute, 38° Helix Solid Carbide Roughing Endmills with 3xD Relieved Necks and Chip Splitting Cutting Edges -
Solid Milling, Solid round tools, Square
ECP-H4L-CFR 4 Flute Solid Carbide Endmills with Different Helix, Variable Pitch and Chip Splitting Cutting Edges for Roughing
Solid Milling, Solid round tools, SquareECP-H4L-CFR 4 Flute Solid Carbide Endmills with Different Helix, Variable Pitch and Chip Splitting Cutting Edges for Roughing
- CHATTERFREE 4 flute solid carbide roughing endmills with 36-37° different helix and long chip splitting cutting edges for high stock removal rates.
- Mainly for machining stainless steel and high temperature alloys.
- Number of flutes.
- C-Cylindrical, W-Weldon.
SKU: ECP-H4L-CFR 4 Flute Solid Carbide Endmills with Different Helix, Variable Pitch and Chip Splitting Cutting Edges for Roughing -
Corner Radius, Solid Milling, Solid round tools
ECP-H7-CF7 Flute Solid Carbide Endmills with Different Helix, Variable Pitch and Chip Splitting Cutting Edges
Corner Radius, Solid Milling, Solid round toolsECP-H7-CF7 Flute Solid Carbide Endmills with Different Helix, Variable Pitch and Chip Splitting Cutting Edges
- CHATTERFREE 7 flute solid carbide roughing endmills with 35-37° different helix and long chip splitting cutting edges for high stock removal rates.
- Mainly for machining stainless steel and high temperature alloys.
- Number of flutes.
- C-Cylindrical.
- Corner radius tolerance (+/-).
SKU: ECP-H7-CF7 Flute Solid Carbide Endmills with Different Helix, Variable Pitch and Chip Splitting Cutting Edges -
Roughing, Solid Milling, Solid round tools
ECR-B-L 4-7 Flute, 45° Helix Solid Carbide Roughing Endmills with 3xD Relieved Necks
Roughing, Solid Milling, Solid round toolsECR-B-L 4-7 Flute, 45° Helix Solid Carbide Roughing Endmills with 3xD Relieved Necks
- 4-7 flute 45° helix, long reach (3xd) solid carbide roughing endmills.
- Used for high stock removal rates.
- Cannot be used for plunging application.
- Number of flutes.
- Maximum ramping angle.
- C-Cylindrical, W-Weldon.
SKU: ECR-B-L 4-7 Flute, 45° Helix Solid Carbide Roughing Endmills with 3xD Relieved Necks -
Corner Radius, Roughing, Solid Milling, Solid round tools
ECR-B-M/ECR-B-M…R 4-7 Flute, 45° Helix Medium Length (2xD) Solid Carbide Roughing Endmills
Corner Radius, Roughing, Solid Milling, Solid round toolsECR-B-M/ECR-B-M…R 4-7 Flute, 45° Helix Medium Length (2xD) Solid Carbide Roughing Endmills
- 4-7 flute, 45° helix medium length (2xd) solid carbide roughing endmills.
- Used for high stock removal rates.
- Cannot be used for plunging application.
- Number of flutes.
- Maximum ramping angle.
- C-Cylindrical, W-Weldon.
SKU: ECR-B-M/ECR-B-M...R 4-7 Flute, 45° Helix Medium Length (2xD) Solid Carbide Roughing Endmills -
Roughing, Solid Milling, Solid round tools
ECR-B-MF 4 and 6 Flute, 45° Helix Medium Length Solid Carbide Roughing Endmills for Materials up to 65 HRc
Roughing, Solid Milling, Solid round toolsECR-B-MF 4 and 6 Flute, 45° Helix Medium Length Solid Carbide Roughing Endmills for Materials up to 65 HRc
- Solid carbide roughing endmills with 4 and 6 flute, 45° helix, medium length (2xD).
- Used for high stock removal rates.
- Special design for hard (up to 65 HRc) materials and high temperature alloys.
- The rougher’s cutting edge profile has shallow serrations.
- A very durable design which leaves only a small amount of material for the finishing cut.
SKU: ECR-B-MF 4 and 6 Flute, 45° Helix Medium Length Solid Carbide Roughing Endmills for Materials up to 65 HRc -
Roughing, Solid Milling, Solid round tools
ECR-B-S 4-7 Flute, 45° Helix Short Length (1xD) Solid Carbide Roughing Endmills
Roughing, Solid Milling, Solid round toolsECR-B-S 4-7 Flute, 45° Helix Short Length (1xD) Solid Carbide Roughing Endmills
- 4-7 Flute, 45° Helix, Short Length (1xD) Solid Carbide Roughing Endmills 4-7 flute, 45° helix, short length (1xd) solid carbide roughing endmills.
- Used for high stock removal rates.
- Cannot be used for plunging application.
- Number of flutes.
- Maximum ramping angle.
- C-Cylindrical, W-Weldon.
SKU: ECR-B-S 4-7 Flute, 45° Helix Short Length (1xD) Solid Carbide Roughing Endmills -
Roughing, Solid Milling, Solid round tools
ECR-B-X 4-5 Flute, 45° Helix Solid Carbide Roughing Endmills with 4xD Relieved Necks
Roughing, Solid Milling, Solid round toolsECR-B-X 4-5 Flute, 45° Helix Solid Carbide Roughing Endmills with 4xD Relieved Necks
- 4-5 flute, 45° helix extra long reach (4xd) solid carbide roughing endmills.
- Used for high stock removal rates.
- Cannot be used for plunging application.
- Number of flutes.
- Maximum ramping angle.
- C-Cylindrical, W-Weldon.
SKU: ECR-B-X 4-5 Flute, 45° Helix Solid Carbide Roughing Endmills with 4xD Relieved Necks -
Corner Radius, Roughing, Solid Milling, Solid round tools
ECR-B3-R 3 Flute, 45° Helix Solid Carbide Roughing Endmills with 3xD Relieved Necks for High Stock Removal Rates of Aluminum
Corner Radius, Roughing, Solid Milling, Solid round toolsECR-B3-R 3 Flute, 45° Helix Solid Carbide Roughing Endmills with 3xD Relieved Necks for High Stock Removal Rates of Aluminum
- 3 flute, 45° helix solid carbide roughing endmills with 3xd relieved necks for high stock removal rates of aluminum.
- Number of flutes.
- Maximum ramping angle.
- C-Cylindrical, W-Weldon.
SKU: ECR-B3-R 3 Flute, 45° Helix Solid Carbide Roughing Endmills with 3xD Relieved Necks for High Stock Removal Rates of Aluminum -
Corner Radius, Roughing, Solid Milling, Solid round tools
ECR-B3-R-C 3 Flute, 45° Helix Solid Carbide Roughing Endmills with 3xD Relieved Necks and Coolant Channels for Aluminum
Corner Radius, Roughing, Solid Milling, Solid round toolsECR-B3-R-C 3 Flute, 45° Helix Solid Carbide Roughing Endmills with 3xD Relieved Necks and Coolant Channels for Aluminum
- 3 flute, 45° helix solid carbide roughing endmills with coolant channels directed to each cutting edge.
- Used for high stock removal rates on aluminum.
- Number of flutes.
- Maximum ramping angle.
- C-Cylindrical.
SKU: ECR-B3-R-C 3 Flute, 45° Helix Solid Carbide Roughing Endmills with 3xD Relieved Necks and Coolant Channels for Aluminum -
Roughing, Solid Milling, Solid round tools
ECR-T-M 4 Flute, 20° Helix Medium Length Solid Carbide Roughing Endmills for High Stock Removal Rates
Roughing, Solid Milling, Solid round toolsECR-T-M 4 Flute, 20° Helix Medium Length Solid Carbide Roughing Endmills for High Stock Removal Rates
- 4 flute, 20° helix medium length Solid carbide roughing endmills.
- Used for high stock removal rates on high temperature alloys (PH).
- Number of flutes.
- Maximum ramping angle.
- C-Cylindrical, W-Weldon.
SKU: ECR-T-M 4 Flute, 20° Helix Medium Length Solid Carbide Roughing Endmills for High Stock Removal Rates -
Corner Radius, Solid Milling, Solid round tools
ECU-E-3-R 3 Flute, 38° Helix Short Undersized Slot / Drill Solid Carbide Endmills with Various Radii According to DIN 6885
Corner Radius, Solid Milling, Solid round toolsECU-E-3-R 3 Flute, 38° Helix Short Undersized Slot / Drill Solid Carbide Endmills with Various Radii According to DIN 6885
- 3 flute, 38° helix short undersized slot / drill solid carbide endmills with various radii according to DIN 6885.
- Number of flutes.
- Maximum ramping angle.
- W-Weldon.
SKU: ECU-E-3-R 3 Flute, 38° Helix Short Undersized Slot / Drill Solid Carbide Endmills with Various Radii According to DIN 6885 -
Corner Radius, Solid Milling, Solid round tools
EFF-S 4 Flute Solid Carbide Endmills with Relieved Necks for Fast Feed High Productivity
Corner Radius, Solid Milling, Solid round toolsEFF-S 4 Flute Solid Carbide Endmills with Relieved Necks for Fast Feed High Productivity
- High productivity solid carbide endmills.
- Can operate at feed rates up to 0.5 mm/tooth, at 0.3 to 0.7 mm D.O.C. even with long overhang.
- For cast iron, alloy and hardened steel up to 65HRc, stainless steel, titanium and nickel based alloys.
SKU: EFF-S 4 Flute Solid Carbide Endmills with Relieved Necks for Fast Feed High Productivity