SKU: ECR-B-MF 4 and 6 Flute, 45° Helix Medium Length Solid Carbide Roughing Endmills for Materials up to 65 HRc
Categories: Roughing, Solid Milling, Solid round tools
Roughing, Solid Milling, Solid round tools
ECR-B-MF 4 and 6 Flute, 45° Helix Medium Length Solid Carbide Roughing Endmills for Materials up to 65 HRc
Availability:
200 in stock
- Solid carbide roughing endmills with 4 and 6 flute, 45° helix, medium length (2xD).
- Used for high stock removal rates.
- Special design for hard (up to 65 HRc) materials and high temperature alloys.
- The rougher’s cutting edge profile has shallow serrations.
- A very durable design which leaves only a small amount of material for the finishing cut.
| Brands | |
|---|---|
| Units of length | |
| Workpiece Material | Cast Iron (K), Hardened Steel (H), Heat-resistant Alloy and Titanium Alloy (S), Stainless Steel (M), Steel (P) |
Based on 0 reviews
Be the first to review “ECR-B-MF 4 and 6 Flute, 45° Helix Medium Length Solid Carbide Roughing Endmills for Materials up to 65 HRc”
Related products
-
Solid round tools, Solid Milling, Roughing, Square
SOLID CARBIDE ENDMILLS UPR100-S4 4 Flute Square End, With Roughing Geometry
Solid round tools, Solid Milling, Roughing, SquareSOLID CARBIDE ENDMILLS UPR100-S4 4 Flute Square End, With Roughing Geometry
- Suitable for Roughing of ordinary steel and cast iron materials (≤48HRC).
- Special edge chipbreaker treatment, suitable for rough machining of grooves and side walls of workpieces.
SKU: UPR100-S4 4 Flute Square End, with Roughing Geometry -
-
Solid round tools, Solid Milling, Roughing
SOLID CARBIDE ENDMILLS UPN210-S4 4 Flute Square End, With Roughing Geometry
Solid round tools, Solid Milling, RoughingSOLID CARBIDE ENDMILLS UPN210-S4 4 Flute Square End, With Roughing Geometry
● Suitable for roughing machining of steels﹠cast iron(≤48HRC).
● Cutting edge with Special chip-breaking design, suitable for groove
and side wall roughing.SKU: UPN210-S4 4 Flute Square End, with Roughing Geometry -
Solid round tools, Solid Milling, Corner Radius, Square
SOLID CARBIDE ENDMILLS US200-R3 3 Flute Corner Radius
Solid round tools, Solid Milling, Corner Radius, SquareSOLID CARBIDE ENDMILLS US200-R3 3 Flute Corner Radius
● Suitable for general machining of stainless steel
(<280HB).
● Special edge design effectively solves the crumbs.
● Water，oil cooling are the best cooling methods.SKU: US200-R3 3 Flute Corner Radius
There are no reviews yet.