SKU: Three Jaw Inside Diameter Micrometer
Category: Inside Measurement
-90%
Inside Measurement
Three Jaw Inside Diameter Micrometer
Availability:
999 in stock
- According with GB／T 6314.
$11.00 – $168.00
| Brands | |
|---|---|
| Three Jaw Inside Diameter Micrometer | SGQS-01, SGQS-02, SGQS-03, SGQS-04, SGQS-1, SGQS-10, SGQS-11, SGQS-12, SGQS-13, SGQS-14, SGQS-15, SGQS-16, SGQS-17, SGQS-18, SGQS-19, SGQS-2, SGQS-20, SGQS-21, SGQS-22, SGQS-23, SGQS-3, SGQS-4, SGQS-5, SGQS-6, SGQS-7, SGQS-8, SGQS-9 |
| Units of length |
Based on 0 reviews
Be the first to review “Three Jaw Inside Diameter Micrometer”
Related products
-
Metrology, Inside Measurement
American Ring Gauge External Thread Go-No-Go Gauge Tooth Gauge
- XYC ring gauge material-GCR15 (bearing steel); the hardness of the specification ≤3MM is HRC58-65°, and the hardness of >3MM is HRC58-60°.
- GB/T3934 standard is adopted, and the accuracy of the go-no-go end is 6G, and 5H and 6H grades are also available.
- Ring gauge mark: GO is used to detect the through end, and NOGO is used to indicate the stop end.
- Round anti-skid design, high hardness and wear resistance.
SKU: 002-23042605 -
Inside Measurement
Internal Micrometer With Two-Point Contact
- Internal Micrometer uses screw pair as intermediate real measuring tool, with two contact points for inside measurements. Internal Micrometer is mainly used to measure internal diameter, width of inside groove, or distance between two inside surfaces.
- Wide measuring range, with extension rods set for different measuring range.
- After precision extension rods are changed, micrometer doesn’t need to be set zero again.
- With locking device.
SKU: Internal Micrometer With Two-Point Contact -
Metrology, Inside Measurement
Metric Thread Ring Gauge Go No-Go Gauge
- XYC ring gauge material-GCR15 (bearing steel); the hardness of the specification ≤3MM is HRC58-65°, and the hardness of >3MM is HRC58-60°.
- GB/T3934 standard is adopted, and the accuracy of the go-no-go end is 6G, and 5H and 6H grades are also available.
- Ring gauge mark: GO is used to detect the through end, and NOGO is used to indicate the stop end.
- Round anti-skid design, high hardness and wear resistance.
SKU: 002-23042604
There are no reviews yet.