• Minimum coolant pressure 20 bar and flow rate 12 l/min • The spindle provides only external strong coolant jet around the tool
(1) Maximum tool shank diameter
* Optional, should be ordered separately
Accessories for Toolholder, Tool Holders
TJS-GJET-HSK A63 Coolant Driven High Speed Compact Spindles with HSK Shanks
Availability:
200 in stock
- Coolant Driven High Speed Compact Spindles with HSK Shanks.
Based on 0 reviews
Be the first to review “TJS-GJET-HSK A63 Coolant Driven High Speed Compact Spindles with HSK Shanks”
Related products
-
Clamping Technology, Tool Holders, Shrink Fit Chuck, DIN 69893 HSK-A, HSK-E, HSK-F
HSK-F Shrink Fit Toolholders
Clamping Technology, Tool Holders, Shrink Fit Chuck, DIN 69893 HSK-A, HSK-E, HSK-FHSK-F Shrink Fit Toolholders
- Tool holding device: HSK63F .
- Bore holes for data carriers according to DIN 69893.
- High runout accuracy.
- Extreme clamping torque.
- Short chamfer.
- Cool Jet on request.
- Low tendency towards vibrations.
- Slim design at the top.
- Very rigid shank.
SKU: HSK-F Shrink Fit Toolholders -
Clamping Technology, Tool Holders, DIN 69893 HSK-A, HSK-E, HSK-F
ER Collet Chucks
- Tool holding device: HSK 63A-ER.
- Bore holes for data carriers according to DIN 69893.
- Fine balanced at G 2.5 at 25,000 rpm.
- High runout accuracy (< 0.003 mm).
- Highest rigidity.
- Highest clamping forces.
SKU: ER Collet Chucks -
Clamping Technology, Tool Holders, Slotting Cutter Adapters, JIS (MAS 403) BT30/BT40/BT50
BT 2° Side Lock Holders
Clamping Technology, Tool Holders, Slotting Cutter Adapters, JIS (MAS 403) BT30/BT40/BT50BT 2° Side Lock Holders
- Tool holding device: BT30-50.
- Bore holes for data carriers according to JIS B6339.
- Run-out accuracy ≤ 0.003 mm measured from taper
to D1. - Balancing grade G2.5 at 25,000 RPM or Umax < 1 gmm.
SKU: BT 2° Side Lock Holders -
Clamping Technology, Tool Holders, DIN 69893 HSK-A, HSK-E, HSK-F
HSK100A ER Collet Chucks
- Tool holding device: HSK 63A-ER.
- Bore holes for data carriers according to DIN 69893.
- Fine balanced at G 2.5 at 25,000 rpm.
- High runout accuracy (< 0.003 mm).
- Highest rigidity.
- Highest clamping forces.
SKU: HSK100A ER Collet Chucks
There are no reviews yet.