ISCAR
Showing 1–30 of 2276 results
-
Copy milling, contouring, Cut off, slot and groove milling, Indexable Tools, Milling Tools
2 Flute Chip Splitting Toroidal Solid Carbide Milling Heads MM HT-NCSR
Copy milling, contouring, Cut off, slot and groove milling, Indexable Tools, Milling Tools2 Flute Chip Splitting Toroidal Solid Carbide Milling Heads MM HT-NCSR
- 2 flute chip splitting toroidal solid carbide milling heads.
- Do not apply lubricant to the threaded connection.
- Number of flutes.
- Specially tailored radius range, available upon request.
SKU: 2 Flute Chip Splitting Toroidal Solid Carbide Milling Heads MM HT-NCSR -
Ball Nose, Solid Milling, Solid round tools
2 Flute High Precision Solid Carbide Ball Nose Endmills for Machining Aluminum EBA-B2
Ball Nose, Solid Milling, Solid round tools2 Flute High Precision Solid Carbide Ball Nose Endmills for Machining Aluminum EBA-B2
- 2 flute high precision solid carbide ball nose endmills for machining aluminum.
- Number of flutes.
- C-Cylindrical.
SKU: 2 Flute High Precision Solid Carbide Ball Nose Endmills for Machining Aluminum EBA-B2 -
Copy milling, contouring, Indexable Tools, Milling Tools, Shoulder milling tools
2 Flute Toroidal Solid Carbide Milling Heads MM HT-NWFR
Copy milling, contouring, Indexable Tools, Milling Tools, Shoulder milling tools2 Flute Toroidal Solid Carbide Milling Heads MM HT-NWFR
- MULTI-MASTER, 2 flute, toroidal, solid carbide milling heads with a side tangential wiper.
- Used for tall shoulders or deep cavities, producing high surface finish.
- Do not apply lubricant to the threaded connection.
- Number of flutes.
- Specially tailored radius range, available upon request.
SKU: 2 Flute Toroidal Solid Carbide Milling Heads MM HT-NWFR -
Solid Milling, Solid round tools, Square
2 Flute, 30 and 45° Helix Medium Length Solid Carbide Slot / Drill Endmills EC-A-2
Solid Milling, Solid round tools, Square2 Flute, 30 and 45° Helix Medium Length Solid Carbide Slot / Drill Endmills EC-A-2
- 2 flute, 30 and 45° helix medium length solid carbide slot / drill endmills.
- Number of flutes.
- Maximum ramping angle.
- C-Cylindrical, W-Weldon.
SKU: 2 Flute, 30 and 45° Helix Medium Length Solid Carbide Slot / Drill Endmills EC-A-2 -
Ball Nose, Solid Milling, Solid round tools
2 Flute, 30° Helix Medium Length Solid Carbide Miniature Ball Nose Endmills EBM-A-2
Ball Nose, Solid Milling, Solid round tools2 Flute, 30° Helix Medium Length Solid Carbide Miniature Ball Nose Endmills EBM-A-2
- 2 flute, 30° helix medium length solid carbide miniature ball nose endmills.
- Number of flutes.
- C-Cylindrical.
SKU: 2 Flute, 30° Helix Medium Length Solid Carbide Miniature Ball Nose Endmills EBM-A-2 -
Solid Milling, Solid round tools, Square
2 Flute, 30° Helix Medium Length Solid Carbide Slot / Drill Endmills with Chamfered Corners ECC-A-2
Solid Milling, Solid round tools, Square2 Flute, 30° Helix Medium Length Solid Carbide Slot / Drill Endmills with Chamfered Corners ECC-A-2
- 2 flute, 30° helix medium length solid carbide slot / drill endmills with chamfered corners.
- Number of flutes.
- Maximum ramping angle.
- C-Cylindrical, W-Weldon.
SKU: 2 Flute, 30° Helix Medium Length Solid Carbide Slot / Drill Endmills with Chamfered Corners ECC-A-2 -
Ball Nose, Solid Milling, Solid round tools
2 Flute, 30° Helix Short Solid Carbide Ball Nose Endmills EB-A-2
Ball Nose, Solid Milling, Solid round tools2 Flute, 30° Helix Short Solid Carbide Ball Nose Endmills EB-A-2
- 2 flute, 30° helix short solid carbide ball nose endmills.
- Short and stable design for profiling (roughing).
- Number of flutes.
- C-Cylindrical.
SKU: 2 Flute, 30° Helix Short Solid Carbide Ball Nose Endmills EB-A-2 -
Ball Nose, Solid Milling, Solid round tools
2 Flute, 30° Helix Spherical Long Solid Carbide Ball Nose Endmills for Materials up to 65 HRc ESB-A2
Ball Nose, Solid Milling, Solid round tools2 Flute, 30° Helix Spherical Long Solid Carbide Ball Nose Endmills for Materials up to 65 HRc ESB-A2
- 2 flute, 30° helix spherical long solid carbide ball nose endmills.
- Used for materials up to 65 HRc.
- Number of flutes.
- C-Cylindrical.
SKU: 2 Flute, 30° Helix Spherical Long Solid Carbide Ball Nose Endmills for Materials up to 65 HRc ESB-A2 -
Solid Milling, Solid round tools, Square
2 Flute, 45° Helix Medium Length Solid Carbide Endmills for Machining Aluminum ECA-B-2
Solid Milling, Solid round tools, Square2 Flute, 45° Helix Medium Length Solid Carbide Endmills for Machining Aluminum ECA-B-2
- 2 flute, 45° helix medium length solid carbide endmills for machining aluminum.
- Number of flutes.
- Maximum ramping angle.
- C-Cylindrical.
SKU: 2 Flute, 45° Helix Medium Length Solid Carbide Endmills for Machining Aluminum ECA-B-2 -
Solid Milling, Solid round tools, Square
2 Flute, 55° Helix Medium Length Solid Carbide Endmills for Machining Aluminum ECA-F-2
Solid Milling, Solid round tools, Square2 Flute, 55° Helix Medium Length Solid Carbide Endmills for Machining Aluminum ECA-F-2
-
2 flute, 55° helix medium length solid carbide endmills.
-
Used for machining aluminum.
- Number of flutes.
- Maximum ramping angle.
- C-Cylindrical.
SKU: 2 Flute, 55° Helix Medium Length Solid Carbide Endmills for Machining Aluminum ECA-F-2 -
-
Ball Nose, Solid Milling, Solid round tools
3 Flute, 30° Helix Short Solid Carbide Ball Nose Endmills EB-A-3
Ball Nose, Solid Milling, Solid round tools3 Flute, 30° Helix Short Solid Carbide Ball Nose Endmills EB-A-3
- 3 flute, 30° helix short solid carbide ball nose endmills.
- Short and stable design for profiling (roughing).
- Number of flutes.
- C-Cylindrical.
SKU: 3 Flute, 30° Helix Short Solid Carbide Ball Nose Endmills EB-A-3 -
Solid Milling, Solid round tools, Square
3 Flute, 38 and 45° Helix Medium Length Slot / Drill Solid Carbide Endmills with Chamfered Corners ECC-E-3
Solid Milling, Solid round tools, Square3 Flute, 38 and 45° Helix Medium Length Slot / Drill Solid Carbide Endmills with Chamfered Corners ECC-E-3
- 3 flute, 38 and 45° helix medium length slot / drill solid carbide endmills with chamfered corners.
- Multi-purpose endmill.
- Suitable for deep slotting.
- Number of flutes.
- Maximum ramping angle.
- C-Cylindrical, W-Weldon.
SKU: 3 Flute, 38 and 45° Helix Medium Length Slot / Drill Solid Carbide Endmills with Chamfered Corners ECC-E-3 -
Solid Milling, Solid round tools, Square
3 Flute, 38° Helix Medium Length Solid Carbide Endmills EC-E-3
Solid Milling, Solid round tools, Square3 Flute, 38° Helix Medium Length Solid Carbide Endmills EC-E-3
- 3 flute, 38° helix medium length solid carbide endmills.
- Multi-purpose endmill.
- Suitable for deep slotting.
- Number of flutes.
- Maximum ramping angle.
- C-Cylindrical, W-Weldon.
SKU: 3 Flute, 38° Helix Medium Length Solid Carbide Endmills EC-E-3 -
Roughing, Solid Milling, Solid round tools
3 Flute, 38° Helix Medium Length Solid Carbide Roughing Endmills with 3xD Relieved Necks for Machining Aluminum ERC-E-3
Roughing, Solid Milling, Solid round tools3 Flute, 38° Helix Medium Length Solid Carbide Roughing Endmills with 3xD Relieved Necks for Machining Aluminum ERC-E-3
- 3 flute, 38° helix medium length solid carbide roughing endmills.
- Used for maximum stock removal on aluminum and other nonferrous materials.
- Number of flutes.
- Maximum ramping angle.
- C-Cylindrical, W-Weldon.
SKU: 3 Flute, 38° Helix Medium Length Solid Carbide Roughing Endmills with 3xD Relieved Necks for Machining Aluminum ERC-E-3 -
Solid Milling, Solid round tools, Square
3 Flute, 38° Helix Short Solid Carbide Slot / Drill Endmills with 3xD Relieved Necks and Chamfered Corners ECS/ECCS-E-3
Solid Milling, Solid round tools, Square3 Flute, 38° Helix Short Solid Carbide Slot / Drill Endmills with 3xD Relieved Necks and Chamfered Corners ECS/ECCS-E-3
- 3 flute, 38° helix short solid carbide slot / drill endmills with 3xd relieved necks and chamfered corners.
- Number of flutes.
- Maximum ramping angle.
- W-Weldon.
SKU: 3 Flute, 38° Helix Short Solid Carbide Slot / Drill Endmills with 3xD Relieved Necks and Chamfered Corners ECS/ECCS-E-3 -
Solid Milling, Solid round tools, Square
3 Flute, 38° Helix Short Undersized Slot / Drill Solid Carbide Endmills ECU-E-3
Solid Milling, Solid round tools, Square3 Flute, 38° Helix Short Undersized Slot / Drill Solid Carbide Endmills ECU-E-3
- 3 flute, 38° helix short undersized slot / drill solid carbide endmills.
- Undersized short design for keyholes.
- Number of flutes.
- Maximum ramping angle.
- W-Weldon.
SKU: 3 Flute, 38° Helix Short Undersized Slot / Drill Solid Carbide Endmills ECU-E-3 -
Solid Milling, Solid round tools, Square
3 Flute, 45° Helix Medium Length Slot / Drill Solid Carbide Endmills EC-B-3
Solid Milling, Solid round tools, Square3 Flute, 45° Helix Medium Length Slot / Drill Solid Carbide Endmills EC-B-3
- 3 flute, 45° helix medium length slot / drill solid carbide endmills.
- Excellent for deep slotting and shouldering.
- Number of flutes.
- Maximum ramping angle.
- C-Cylindrical, W-Weldon.
SKU: 3 Flute, 45° Helix Medium Length Slot / Drill Solid Carbide Endmills EC-B-3 -
Corner Radius, Solid Milling, Solid round tools
3 Flute, 45° Helix Medium Length Solid Carbide Endmills for Machining Aluminum ECA-B-3
Corner Radius, Solid Milling, Solid round tools3 Flute, 45° Helix Medium Length Solid Carbide Endmills for Machining Aluminum ECA-B-3
- 3 flute, 45° helix medium length solid carbide endmills.
- Used for machining aluminum.
- Number of flutes.
- Maximum ramping angle.
- C-Cylindrical, W-Weldon.
SKU: 3 Flute, 45° Helix Medium Length Solid Carbide Endmills for Machining Aluminum ECA-B-3 -
Roughing, Solid Milling, Solid round tools
3, 4, and 6 Flute, 30° and 38° Helix Solid Carbide Roughing Endmills with 3xD Relieved Neck for Alloy Steel ERF-A/E-3,4,6
Roughing, Solid Milling, Solid round tools3, 4, and 6 Flute, 30° and 38° Helix Solid Carbide Roughing Endmills with 3xD Relieved Neck for Alloy Steel ERF-A/E-3,4,6
- 3, 4, 6 flute, 30° and 38° helix, fine pitch, medium length solid carbide roughing endmills.
- Used for maximum stock removal of alloy steel.
SKU: 3, 4, and 6 Flute, 30° and 38° Helix Solid Carbide Roughing Endmills with 3xD Relieved Neck for Alloy Steel ERF-A/E-3,4,6 -
-
Indexable Tools, Milling Inserts, Milling Tools
3M AXKT 1304..R-PDRMM Milling Inserts
- MILL2000 Inserts with a variety of corner radii.
- Heavy duty design: dovetail section shape, helical cutting edge and positive rake angle.
- Enables secure clamping and high durability in rough applications.
SKU: 3M AXKT 1304..R-PDRMM Milling Inserts -
Indexable Tools, Milling Inserts, Milling Tools
3M AXKT 2006..R-PDR Milling Inserts
- MILL2000 Inserts for heavy milling applications with a variety of corner radii.
- Heavy duty design: dovetail section shape, helical cutting edge and positive rake angle.
- Enable a secure clamping and high durability in rough applications.
SKU: 3M AXKT 2006..R-PDR Milling Inserts -
-
Solid Milling, Solid round tools, Square
4 & 6 Flute, 45° Helix Extra Long Solid Carbide Endmills ECXL-B-4/6
Solid Milling, Solid round tools, Square4 & 6 Flute, 45° Helix Extra Long Solid Carbide Endmills ECXL-B-4/6
- 4 & 6 flute, 45° helix extra long solid carbide endmills.
- Smooth cutting in extra long depth.
- Cannot be used for plunging application.
- Number of flutes.
- C-Cylindrical, W-Weldon.
SKU: 4 & 6 Flute, 45° Helix Extra Long Solid Carbide Endmills ECXL-B-4/6 -
Solid Milling, Solid round tools, Square
4 & 6 Flute, 45° Helix Long Solid Carbide Endmills ECL-B-4/6
Solid Milling, Solid round tools, Square4 & 6 Flute, 45° Helix Long Solid Carbide Endmills ECL-B-4/6
- 4 & 6 flute, 45° helix long solid carbide endmills.
- Smooth cutting in extra long depth.
- Cannot be used for plunging application.
- Number of flutes.
- C-Cylindrical, W-Weldon.
SKU: 4 & 6 Flute, 45° Helix Long Solid Carbide Endmills ECL-B-4/6 -
Cut off, slot and groove milling, Indexable Tools, Milling Tools, Shoulder milling tools
4 Flute Solid Carbide Heads MM EFS-CF
Cut off, slot and groove milling, Indexable Tools, Milling Tools, Shoulder milling tools4 Flute Solid Carbide Heads MM EFS-CF
- 4 flute solid carbide heads with 38° helix and variable pitch for chatter free roughing and finishing applications.
- Do not apply lubricant to the threaded connection.
- Number of flutes.
SKU: 4 Flute Solid Carbide Heads MM EFS-CF -
Solid Milling, Solid round tools, Square
4 Flute, 30° Helix Medium Length Solid Carbide Endmills with Chamfered Corners ECC-A-4
Solid Milling, Solid round tools, Square4 Flute, 30° Helix Medium Length Solid Carbide Endmills with Chamfered Corners ECC-A-4
- 4 flute, 30° helix medium length solid carbide endmills with chamfered corners.
- Number of flutes.
- Maximum ramping angle.
- C-Cylindrical, W-Weldon.
SKU: 4 Flute, 30° Helix Medium Length Solid Carbide Endmills with Chamfered Corners ECC-A-4