Aluminium (N)
Showing 91–120 of 460 results
-
Indexable Tools, Turning Inserts, TURNING TOOLS
DNMG/DNGG-PP 55° Double-Sided Rhombic Inserts for Machining Very Ductile Materials at Medium Cutting Conditions
Indexable Tools, Turning Inserts, TURNING TOOLSDNMG/DNGG-PP 55° Double-Sided Rhombic Inserts for Machining Very Ductile Materials at Medium Cutting Conditions
- 55° Double-Sided Rhombic Inserts for Machining Very Ductile Materials at Medium Cutting Conditions.
SKU: DNMG/DNGG-PP 55° Double-Sided Rhombic Inserts for Machining Very Ductile Materials at Medium Cutting Conditions -
Indexable Tools, Turning Inserts, TURNING TOOLS
DNMG/DNGG-TF Double-Sided 55° Rhombic Inserts for Machining a Wide Range of Materials at Medium Cutting Conditions
Indexable Tools, Turning Inserts, TURNING TOOLSDNMG/DNGG-TF Double-Sided 55° Rhombic Inserts for Machining a Wide Range of Materials at Medium Cutting Conditions
- Double-Sided 55° Rhombic Inserts for Machining a Wide Range of Materials at Medium Cutting Conditions.
SKU: DNMG/DNGG-TF Double-Sided 55° Rhombic Inserts for Machining a Wide Range of Materials at Medium Cutting Conditions -
DRILLING, JOBBER(4D-7D), Solid round tools, Taper (8D - 30D)
Drilling Tools PC series(straight flute drill) for machining of cast iron , Al alloy(d1 4.0~20.0mm)
DRILLING, JOBBER(4D-7D), Solid round tools, Taper (8D - 30D)Drilling Tools PC series(straight flute drill) for machining of cast iron , Al alloy(d1 4.0~20.0mm)
- For materials with short chips such as cast iron, silicon-aluminum alloy, etc.
- Excellent self centering capability, able to machine with high effificiency, the hole precision up to H7.
- High positional accuracy, high linearity and good surface fifinish can be obtained in the hole drilled.
SKU: Drilling Tools PC series(straight flute drill) for machining of cast iron , Al alloy(d1 4.0~20.0mm) -
DRILLING, JOBBER(4D-7D), Solid round tools, Stub (2D - 3D)
Drilling Tools SC series(twist drill) for machining of cast iron, Al alloy(d1 2.0~7.4mm)
DRILLING, JOBBER(4D-7D), Solid round tools, Stub (2D - 3D)Drilling Tools SC series(twist drill) for machining of cast iron, Al alloy(d1 2.0~7.4mm)
- For materials with short chips such as cast iron, silicon-aluminum alloy, etc.
- Cutting edge and shank with same diameter.
SKU: Drilling Tools SC series(twist drill) for machining of cast iron, Al alloy(d1 2.0~7.4mm) -
DRILLING, Solid round tools, Taper (8D - 30D)
Drilling Tools SC series(twist drill) for machining of cast iron, Al alloy(d1 7.5~16.0mm)
DRILLING, Solid round tools, Taper (8D - 30D)Drilling Tools SC series(twist drill) for machining of cast iron, Al alloy(d1 7.5~16.0mm)
- For materials with short chips such as cast iron, silicon-aluminum alloy, etc.
- Cutting edge and shank with same diameter.
SKU: Drilling Tools SC series(twist drill) for machining of cast iron, Al alloy(d1 7.5~16.0mm) -
Ball Nose, Solid Milling, Solid round tools
EB-A2 (economical) Economical Type 2 Flute, 30° Helix Ball Nose Solid Carbide Endmills
Ball Nose, Solid Milling, Solid round toolsEB-A2 (economical) Economical Type 2 Flute, 30° Helix Ball Nose Solid Carbide Endmills
- SOLIDECO – economical type 2 flute, 30° helix ball nose solid carbide endmills.
- Number of flutes.
- C-Cylindrical, W-Weldon.
SKU: EB-A2 (economical) Economical Type 2 Flute, 30° Helix Ball Nose Solid Carbide Endmills -
Ball Nose, Solid Milling, Solid round tools
EB-A2(economical-extra long) Economical Type 2 Flute, 30° Helix Ball Nose Extra Long Solid Carbide Endmills
Ball Nose, Solid Milling, Solid round toolsEB-A2(economical-extra long) Economical Type 2 Flute, 30° Helix Ball Nose Extra Long Solid Carbide Endmills
- SOLIDECO – economical type 2 flute, 30° helix ball nose extra long solid carbide endmills.
- Number of flutes.
- C-Cylindrical.
SKU: EB-A2(economical-extra long) Economical Type 2 Flute, 30° Helix Ball Nose Extra Long Solid Carbide Endmills -
Ball Nose, Solid Milling, Solid round tools
EB-A4 (economical-short) Economical Type 4 Flute, 30° Helix Ball Nose Short Solid Carbide Endmills
Ball Nose, Solid Milling, Solid round toolsEB-A4 (economical-short) Economical Type 4 Flute, 30° Helix Ball Nose Short Solid Carbide Endmills
- SOLIDECO – economical type 4 flute, 30° helix ball nose short solid carbide endmills.
- Number of flutes.
- C-Cylindrical.
SKU: EB-A4 (economical-short) Economical Type 4 Flute, 30° Helix Ball Nose Short Solid Carbide Endmills -
Solid Milling, Solid round tools, Square
EC-A2 (economical- medium) Economical Type 2 Flute, 30° Helix Center Cutting, Medium Length Solid Carbide Endmills
Solid Milling, Solid round tools, SquareEC-A2 (economical- medium) Economical Type 2 Flute, 30° Helix Center Cutting, Medium Length Solid Carbide Endmills
- 2 flute, 30 and 45° helix medium length solid carbide slot / drill endmills.
- Number of flutes.
- Maximum ramping angle.
- C-Cylindrical, W-Weldon.
SKU: EC-A2 (economical- medium) Economical Type 2 Flute, 30° Helix Center Cutting, Medium Length Solid Carbide Endmills -
Solid Milling, Solid round tools, Square
EC-A2(economical-extra long) Economical Type 2 Flute, 30° Helix, Center Cutting, Extra Long Solid Carbide Endmills
Solid Milling, Solid round tools, SquareEC-A2(economical-extra long) Economical Type 2 Flute, 30° Helix, Center Cutting, Extra Long Solid Carbide Endmills
- Economical type 2 flute, 30° helix, center cutting, extra-long solid carbide endmills.
- Number of flutes.
- Maximum ramping angle.
- C-Cylindrical.
SKU: EC-A2(economical-extra long) Economical Type 2 Flute, 30° Helix, Center Cutting, Extra Long Solid Carbide Endmills -
Solid Milling, Solid round tools, Square
EC-A3/E3 (economical-medium) Economical Type 3 Flute, 30° and 38° Helix, Center Cutting, Medium Length Solid Carbide Endmills
Solid Milling, Solid round tools, SquareEC-A3/E3 (economical-medium) Economical Type 3 Flute, 30° and 38° Helix, Center Cutting, Medium Length Solid Carbide Endmills
- SOLIDECO – economical type 3 flute, 30° and 38° helix, center cutting, medium length solid carbide endmills.
- Number of flutes.
- Maximum ramping angle.
- C-Cylindrical.
SKU: EC-A3/E3 (economical-medium) Economical Type 3 Flute, 30° and 38° Helix, Center Cutting, Medium Length Solid Carbide Endmills -
Solid Milling, Solid round tools, Square
EC-A3/E3 (economical-short) Economical Type 3 Flute, 30° and 38° Helix, Center Cutting, Short Length Solid Carbide Endmills
Solid Milling, Solid round tools, SquareEC-A3/E3 (economical-short) Economical Type 3 Flute, 30° and 38° Helix, Center Cutting, Short Length Solid Carbide Endmills
- Economical type 3 flute, 30° and 38° helix, center cutting, short length solid carbide endmills.
- Number of flutes.
- Maximum ramping angle.
- C-Cylindrical, W-Weldon.
SKU: EC-A3/E3 (economical-short) Economical Type 3 Flute, 30° and 38° Helix, Center Cutting, Short Length Solid Carbide Endmills -
Solid Milling, Solid round tools, Square
EC-A4 (economical- medium) Economical Type 4 Flute, 30° Helix, Center Cutting, Medium Length Solid Carbide Endmills
Solid Milling, Solid round tools, SquareEC-A4 (economical- medium) Economical Type 4 Flute, 30° Helix, Center Cutting, Medium Length Solid Carbide Endmills
- Economical type 4 flute, 30° helix, center cutting, medium length solid carbide endmills.
- Number of flutes.
- Maximum ramping angle.
- C-Cylindrical.
SKU: EC-A4 (economical- medium) Economical Type 4 Flute, 30° Helix, Center Cutting, Medium Length Solid Carbide Endmills -
Solid Milling, Solid round tools, Square
EC-A4(economical-extra long) Economical Type 4 Flute, 30° Helix, Center Cutting, Extra Long Solid Carbide Endmills
Solid Milling, Solid round tools, SquareEC-A4(economical-extra long) Economical Type 4 Flute, 30° Helix, Center Cutting, Extra Long Solid Carbide Endmills
- Economical type 4 flute, 30° helix, center cutting, extra long solid carbide endmills.
- Number of flutes.
- Maximum ramping angle.
- C-Cylindrical.
SKU: EC-A4(economical-extra long) Economical Type 4 Flute, 30° Helix, Center Cutting, Extra Long Solid Carbide Endmills -
Solid Milling, Solid round tools, Square
EC-B3 (economical-medium) Economical Type 3 Flute, 45° Helix, Center Cutting, Medium Length Solid Carbide Endmills
Solid Milling, Solid round tools, SquareEC-B3 (economical-medium) Economical Type 3 Flute, 45° Helix, Center Cutting, Medium Length Solid Carbide Endmills
- Economical type 3 flute, 45° helix, center cutting, medium length solid carbide endmills.
- Number of flutes.
- Maximum ramping angle.
- C-Cylindrical.
SKU: EC-B3 (economical-medium) Economical Type 3 Flute, 45° Helix, Center Cutting, Medium Length Solid Carbide Endmills -
Solid Milling, Solid round tools, Square
EC-B3 (economical-short) Economical Type 3 Flute, 45° Helix, Center Cutting, Short Length Solid Carbide Endmills
Solid Milling, Solid round tools, SquareEC-B3 (economical-short) Economical Type 3 Flute, 45° Helix, Center Cutting, Short Length Solid Carbide Endmills
- Economical type 3 flute, 45° helix, center cutting, short length solid carbide endmills.
- Number of flutes.
- Maximum ramping angle.
- C-Cylindrical, W-Weldon.
SKU: EC-B3 (economical-short) Economical Type 3 Flute, 45° Helix, Center Cutting, Short Length Solid Carbide Endmills -
Corner Radius, Roughing, Solid Milling, Solid round tools
ECA-H3-CF Solid Carbide Endmills with Different Helix, Variable Pitch and 3, 4 and 5xD Relieved Necks for Machining Aluminum
Corner Radius, Roughing, Solid Milling, Solid round toolsECA-H3-CF Solid Carbide Endmills with Different Helix, Variable Pitch and 3, 4 and 5xD Relieved Necks for Machining Aluminum
- CHATTERFREE, 3 flute solid carbide endmills with 39-41° different helix, 3, 4 and 5xD neck relief for machining aluminum.
- Excellent chatter dampening ability.
- Used for both roughing and finishing.
- Number of flutes.
- Maximum ramping angle.
- C-Cylindrical.
SKU: ECA-H3-CF Solid Carbide Endmills with Different Helix, Variable Pitch and 3, 4 and 5xD Relieved Necks for Machining Aluminum -
Corner Radius, Solid Milling, Solid round tools
ECA-H3-CF Solid Carbide Endmills with Different Helix, Variable Pitch and 3, 4 and 5xD Relieved Necks for Machining Aluminum
Corner Radius, Solid Milling, Solid round toolsECA-H3-CF Solid Carbide Endmills with Different Helix, Variable Pitch and 3, 4 and 5xD Relieved Necks for Machining Aluminum
- Solid Carbide Endmills with different Helix, variable pitch and 3, 4 and 5xD relieved necks for machining aluminum.
- Number of flutes.
- Maximum ramping angle.
- C-Cylindrical.
SKU: ECA-H3-CF Solid Carbide Endmills with Different Helix, Variable Pitch and 3, 4 and 5xD Relieved Necks for Machining Aluminum -
Corner Radius, Roughing, Solid Milling, Solid round tools
ECA-H3-CF-C Solid Carbide Endmills with Different Helix, Variable Pitch, Coolant Holes and Neck Relief for Machining Aluminum
Corner Radius, Roughing, Solid Milling, Solid round toolsECA-H3-CF-C Solid Carbide Endmills with Different Helix, Variable Pitch, Coolant Holes and Neck Relief for Machining Aluminum
- CHATTERFREE, 3 flute solid carbide endmills with 39-41° different helix, relieved neck and coolant holes for machining aluminum.
- Excellent chatter dampening ability.
- Used for both roughing and finishing.
- Number of flutes.
- Maximum ramping angle.
- C-Cylindrical.
SKU: ECA-H3-CF-C Solid Carbide Endmills with Different Helix, Variable Pitch, Coolant Holes and Neck Relief for Machining Aluminum -
Corner Radius, Roughing, Solid Milling, Solid round tools
ECA-H4-CF Solid Carbide Endmills with Different Helix and Long Neck Relief for Machining Aluminum
Corner Radius, Roughing, Solid Milling, Solid round toolsECA-H4-CF Solid Carbide Endmills with Different Helix and Long Neck Relief for Machining Aluminum
- Chatter free 4 flute solid carbide endmills with 39-41° different helix and long neck relief for machining aluminum.
- Excellent chatter dampening ability.
- Used for both roughing and finishing.
- Number of flutes.
- Maximum ramping angle.
- C-Cylindrical.
SKU: ECA-H4-CF Solid Carbide Endmills with Different Helix and Long Neck Relief for Machining Aluminum -
Corner Radius, Roughing, Solid Milling, Solid round tools
ECAP-H3-CF Solid Carbide Endmills with Different Helix, Variable Pitch, Chip Splitters and Coolant Holes for Machining Aluminum
Corner Radius, Roughing, Solid Milling, Solid round toolsECAP-H3-CF Solid Carbide Endmills with Different Helix, Variable Pitch, Chip Splitters and Coolant Holes for Machining Aluminum
- Chatter free 4 flute solid carbide endmills with 39-41° different helix and long neck relief for machining aluminum.
- Excellent chatter dampening ability.
- Used for both roughing and finishing.
- Number of flutes.
- Maximum ramping angle.
- C-Cylindrical.
SKU: ECAP-H3-CF Solid Carbide Endmills with Different Helix, Variable Pitch, Chip Splitters and Coolant Holes for Machining Aluminum -
Solid Milling, Solid round tools, Square
Economical Type 2 Flute, 30° Helix Center Cutting Short Solid Carbide Endmills EC-A2 (economical-short)
Solid Milling, Solid round tools, SquareEconomical Type 2 Flute, 30° Helix Center Cutting Short Solid Carbide Endmills EC-A2 (economical-short)
- SOLIDECO – economical type 2 flute, 30° helix center cutting short solid carbide endmills.
- Number of flutes.
- Maximum ramping angle.
- W-Weldon.
SKU: Economical Type 2 Flute, 30° Helix Center Cutting Short Solid Carbide Endmills EC-A2 (economical-short) -
Corner Radius, Roughing, Solid Milling, Solid round tools
ECR-B3-R 3 Flute, 45° Helix Solid Carbide Roughing Endmills with 3xD Relieved Necks for High Stock Removal Rates of Aluminum
Corner Radius, Roughing, Solid Milling, Solid round toolsECR-B3-R 3 Flute, 45° Helix Solid Carbide Roughing Endmills with 3xD Relieved Necks for High Stock Removal Rates of Aluminum
- 3 flute, 45° helix solid carbide roughing endmills with 3xd relieved necks for high stock removal rates of aluminum.
- Number of flutes.
- Maximum ramping angle.
- C-Cylindrical, W-Weldon.
SKU: ECR-B3-R 3 Flute, 45° Helix Solid Carbide Roughing Endmills with 3xD Relieved Necks for High Stock Removal Rates of Aluminum -
Corner Radius, Roughing, Solid Milling, Solid round tools
ECR-B3-R-C 3 Flute, 45° Helix Solid Carbide Roughing Endmills with 3xD Relieved Necks and Coolant Channels for Aluminum
Corner Radius, Roughing, Solid Milling, Solid round toolsECR-B3-R-C 3 Flute, 45° Helix Solid Carbide Roughing Endmills with 3xD Relieved Necks and Coolant Channels for Aluminum
- 3 flute, 45° helix solid carbide roughing endmills with coolant channels directed to each cutting edge.
- Used for high stock removal rates on aluminum.
- Number of flutes.
- Maximum ramping angle.
- C-Cylindrical.
SKU: ECR-B3-R-C 3 Flute, 45° Helix Solid Carbide Roughing Endmills with 3xD Relieved Necks and Coolant Channels for Aluminum -
Indexable Tools, Threading Inserts, THREADING TOOLS
ER/L-60° External Laydown Threading Inserts with a 60° Partial Profile for General Industries
Indexable Tools, Threading Inserts, THREADING TOOLSER/L-60° External Laydown Threading Inserts with a 60° Partial Profile for General Industries
- External Laydown Threading Inserts with a 60° Partial Profile for General Industries.
SKU: ER/L-60° External Laydown Threading Inserts with a 60° Partial Profile for General Industries -
Indexable Tools, Threading Inserts, THREADING TOOLS
ER/L-ABUT External American Buttress Laydown Threading Inserts for High Force Transmission in One Direction
Indexable Tools, Threading Inserts, THREADING TOOLSER/L-ABUT External American Buttress Laydown Threading Inserts for High Force Transmission in One Direction
- External American Buttress Laydown Threading Inserts for High Force Transmission in One Direction.
SKU: ER/L-ABUT External American Buttress Laydown Threading Inserts for High Force Transmission in One Direction -
Indexable Tools, Threading Inserts, THREADING TOOLS
ER/L-ISO External ISO (continued) Metric (DIN13 12-1986 class: 6G) Laydown Threading Inserts for General Industry
Indexable Tools, Threading Inserts, THREADING TOOLSER/L-ISO External ISO (continued) Metric (DIN13 12-1986 class: 6G) Laydown Threading Inserts for General Industry
- External ISO Metric (DIN13 12-1986 class: 6G) Laydown Threading Inserts for General Industry.
SKU: ER/L-ISO External ISO (continued) Metric (DIN13 12-1986 class: 6G) Laydown Threading Inserts for General Industry -
Indexable Tools, Threading Inserts, THREADING TOOLS
ER/L-ISO External ISO Metric (DIN13 12-1986 class: 6G) Laydown Threading Inserts for General Industry
Indexable Tools, Threading Inserts, THREADING TOOLSER/L-ISO External ISO Metric (DIN13 12-1986 class: 6G) Laydown Threading Inserts for General Industry
- External ISO Metric (DIN13 12-1986 class: 6G) Laydown Threading Inserts for General Industry.
SKU: ER/L-ISO External ISO Metric (DIN13 12-1986 class: 6G) Laydown Threading Inserts for General Industry