Shop
Showing 1–30 of 7424 results
-
DRILLING, HSS drills, Solid round tools
Hexagonal Shank Deep Hole Auger Bits Extended Twist Drill
- Hard steel forging, high hardness.
- The blade is sharp and threaded for chip removal, and the hole is smooth and non-slip handle.
- Sharpening process, accurate positioning, not easy to shift, smooth and fast cutting.
- The wide groove is effective and fast for chip removal, with strong continuity. Straight drilling, not easy to block.
- The non-slip hexagonal handle design fits the three-jaw chuck better, reducing slipping, and is used for most hand drills.
SKU: 003-23042713 -
DRILLING, HSS drills, Solid round tools
Anti-slip Triangular Handle Alloy Drilling Drill for Ceramic Tile Opening
DRILLING, HSS drills, Solid round toolsAnti-slip Triangular Handle Alloy Drilling Drill for Ceramic Tile Opening
- The drill bit is forged with high-hardness alloy, which has high hardness and can play high-strength ceramic tiles.
- 120° drill bit, drilling faster and more neatly.
- The drill bit is made of primary alloy, which has better wear resistance and hardness.
- Drillable: Marble, Brick, Wood, Plastic, Cement Wall, Concrete.
- The double helix effectively prevents chip accumulation and retention, high-speed operation, smooth chip removal and high efficiency.
- Carbide steel material, wear-resistant and impact-resistant.
- Non-slip triangular handle, no slippage when drilling.
- Smooth cutting, smooth surface without burrs.
SKU: 003-23042712 -
DRILLING, HSS drills, Solid round tools
Woodworking Auger Bit For Groove Four Edge Wood Hole Opener
- Quality selection 40CR steel.
- Sharp machine grinds four blades.
- The drill tip is positioned accurately.
- The cutting edge of the data machine is sharpened, the cutting edge is sharper, the chip removal is smoother, and the efficiency is higher.
- Using excellent craftsmanship, the drill bit is carefully polished, wear-resistant and durable, and has a long service life.
- The drill handle specification is unified as 6.35mm square handle, which is suitable for all kinds of electric drills.
SKU: 003-23042711 -
DRILLING, HSS drills, Solid round tools
Three-point Woodworking Flat Drill Plank Hole Opener Power Tool Opening Drill Bit
DRILLING, HSS drills, Solid round toolsThree-point Woodworking Flat Drill Plank Hole Opener Power Tool Opening Drill Bit
- DIY woodworking drilling flat drill bit, which combines high hardness and durability.
- The groove prevents slipping, and the unique groove design on the handle is not easy to fall off.
- Cutting thorn design greatly reduces the occurrence of hole wall chipping.
- Do not use for metal drilling, this is not a drill bit for metal drilling.
SKU: 003-23042710 -
DRILLING, HSS drills, Solid round tools
Rolled Black Yellow Twist Drill High Speed Steel Straight Shank Twist Drill
DRILLING, HSS drills, Solid round toolsRolled Black Yellow Twist Drill High Speed Steel Straight Shank Twist Drill
- The head is specially sharpened to cut iron like mud.
- Large thread groove design, good chip removal performance, fast drilling speed, improve work efficiency.
- The design of 135°drill point with double relief angle is convenient for drilling positioning and high-speed operation, wear resistance, and the cutting head is sharper.
- Using roasted yellowing process. The high-speed steel is integrally formed, the overall heat treatment, and the quenching hardness is stable.
SKU: 003-23042709 -
DRILLING, HSS drills, Solid round tools
High Speed Steel Center Drill Hole Opener for CNC Lathe
- It has good toughness and good cutting performance.
- High hardness, wear resistance, accurate positioning, good chip removal and high efficiency.
- Efficient processing, smooth chip removal.
- The cutting edge is sharp and durable, with 120° standard double rear edge angle, and the cutting edge is stable.
- Note: The shank diameter of the drill bit is the same as the drill bit diameter, please confirm whether it can be clamped and used.
- Using high-quality W6MO5CR4V21 from Dachang, after strict heat treatment, the quenching hardness is stable, the rigidity is good, the wear resistance is strong, and the resistance to tearing is high. Long lasting.
- Fully automatic sharpening process is adopted to ensure overall molding and stable dimensions.
- High precision and stable performance. Good surface finish, beautiful and practical.
- The heat treatment hardness reaches 63-66HRC, the tooth strength is high, the cutting is sharp, and the processing efficiency is high.
SKU: 003-23042708 -
DRILLING, HSS drills, Solid round tools
Tungsten Carbide Electric Drill Multifunctional Hexagonal Shank Twist Drill Bit
DRILLING, HSS drills, Solid round toolsTungsten Carbide Electric Drill Multifunctional Hexagonal Shank Twist Drill Bit
- Suitable for tile/ceramic/glass/concrete/cement wall/metal.
- Four-sided cutting, high wear resistance, sharp and wear-resistant.
- The cutting hole wall is smooth and the drilling is smooth.
- The material is hard and tough, very good wear resistance, strong toughness and more durable.
- Hexagonal connector/sturdy and durable long life lithium electric drill/hand electric drill etc.
SKU: 003-23042707 -
DRILLING, HSS drills, Solid round tools
Alloy Steel Drill Bit Multifunctional Electric Hammer Chisel
- U-shaped chisel, flat chisel, and pointed chisel are available in a variety of options, suitable for a variety of work scenarios.
- Square shank, round shank, hexagonal shank, five pit, 65A, various models are available.
- Made of high-quality 40CR alloy steel, with high hardness, impact resistance and good cutting performance.
- The quenching process withstands heavy loads and improves the toughness, shaping and wear resistance of the chisel.
- The surface is sandblasted. Wear-resistant, corrosion-resistant and durable.
SKU: 003-23042706 -
DRILLING, HSS drills, Solid round tools
Automatic Center Punch Positioning Drilling Hole Punching Spring Fixed Point Device
DRILLING, HSS drills, Solid round toolsAutomatic Center Punch Positioning Drilling Hole Punching Spring Fixed Point Device
- High-hardness material to avoid broken blades and fractures during knocking.
- After positioning punch quenching, the hardness is high, and the wear resistance is higher during operation.
- The thimble is made of high-hardness chrome-vanadium gold steel, which is durable and not easy to damage.
- Non-slip alloy shell body, diamond-shaped texture, strong and beautiful and more durable.
- Made of ABS hard engineering plastic, comfortable to hold, wear-resistant and durable.
SKU: 003-23042705 -
DRILLING, HSS drills, Solid round tools
Cross Impact Drill Square Handle Round Handle Electric Hammer Alloy Drill Bit
DRILLING, HSS drills, Solid round toolsCross Impact Drill Square Handle Round Handle Electric Hammer Alloy Drill Bit
- Alloy four blades, suitable for reinforced concrete/rock/cement wall/brick wall.
- When encountering thick steel bars, the drill will not get stuck and the alloy will not be damaged.
- When encountering thick steel bars, the drill will not get stuck and the alloy will not be damaged.
- Sturdy and durable with a constant handle. Standard shank design, round handle/square handle.
- Applicable: square handle four-pit electric hammer drill.
- Applicable: impact drill with round handle, two pits and two grooves.
SKU: 003-23042704 -
DRILLING, HSS drills, Solid round tools
Square Handle Round Handle Tungsten Steel Alloy Electric Hammer Drill Bit Impact Drill Bit
DRILLING, HSS drills, Solid round toolsSquare Handle Round Handle Tungsten Steel Alloy Electric Hammer Drill Bit Impact Drill Bit
- The tungsten steel alloy cutter head can penetrate steel bars in seconds, especially for reinforced concrete.
- The sharpness and wear resistance are greatly increased, and the welding of the knife head is firm.
- The U-shaped spiral groove design improves the waste chip discharge during high-speed operation.
- Standard handle design, two pits and two grooves for round handles, four pits for square handles.
- For round handles: Slight electric hammers.
- Square handle is suitable for: heavy electric hammer.
- Suitable for openings in concrete walls, cement piers, walls, etc.
SKU: 003-23042703 -
DRILLING, HSS drills, Solid round tools
Square Handle Round Handle Electric Hammer Drill Bit Impact Rotary Head Electric Hammer
DRILLING, HSS drills, Solid round toolsSquare Handle Round Handle Electric Hammer Drill Bit Impact Rotary Head Electric Hammer
- Sharp and tough, small incision resistance, high drilling efficiency.
- The groove is smooth and flat without occupying the edge, which is conducive to fast chip removal at high speed.
- International standard drill clamp handle, round handle with two pits and two grooves, square handle with four pits.
- Round handle is suitable for: light electric hammer.
- Square handle is suitable for: heavy electric hammer.
- Note: Three-jaw electric drills are not recommended!
SKU: 003-23042702 -
DRILLING, HSS drills, Solid round tools
Multifunctional Triangular Handle Hard Alloy Drill Glass Drill Tile Opening Drill Bit
DRILLING, HSS drills, Solid round toolsMultifunctional Triangular Handle Hard Alloy Drill Glass Drill Tile Opening Drill Bit
- Tungsten carbide cutter head is harder than ordinary drill bits, more wear-resistant and wear-resistant.
- The surface of the drill body has been finely polished and anti-rust, which makes it easier to remove chips from drilling.
- The tail chamfering is easy to install, firm and non-slip, and suitable for various chucks.
- This type of drill bit can be installed in many types of machines such as ordinary hand drills, bench drills and charging machines, and can be used in a range of more than 10MM.
- This drill bit not only has the function of ordinary glass ceramic drill bit, but also has the function of electric hammer drill bit.
- It can open holes on the cement load-bearing body, which solves the problem that ordinary drill bits are easy to fall when hitting a stone, and has no damage to the tile wall.
- After each use, please wipe off the stains on the surface of the product, and apply anti-rust oil to prevent rust.
- All kinds of manual tools must be installed according to the correct steps, and it is forbidden to use the tools before they are installed.
- Note: It is recommended to use 24V or above for charging equipment, for electric hand drills, it is recommended to use a model with a real power of 750W or above, and for bench drills, it is recommended to select drill bits according to the machined aperture.
SKU: 003-23042701 -
DRILLING, HSS drills, Solid round tools
High Cobalt Twist Drill tap Drilling Right Drill
- 135° standard double back rake angle.
- Self assured, good.
- Small feed force.
- More efficient and precise drilling.
- Suitable for high-load drilling in most application scenarios.
- It is suitable for processing common medium and high strength structural steel, die steel, gray cast iron, aluminum alloy, copper alloy or plastic, stainless steel and other materials.
SKU: 002-23042610 -
DRILLING, HSS drills, Solid round tools
High Cobalt Twist Drill tap Drilling Right Drill High Speed Steel Drill Bit
DRILLING, HSS drills, Solid round toolsHigh Cobalt Twist Drill tap Drilling Right Drill High Speed Steel Drill Bit
- 135° standard double back rake angle.
- Self assured, good.
- Small feed force.
- More efficient and precise drilling.
- Suitable for high-load drilling in most application scenarios.
- It is suitable for processing common medium and high strength structural steel, die steel, gray cast iron, aluminum alloy, copper alloy or plastic, stainless steel and other materials.
SKU: 002-23042609 -
Clamping Technology, Tapping heads
Micro Compensation Rigid Tapping Holder
- Product advantage introduction: Provide small synchronous stretching compensation during the tapping process.
- It can instantly correct the meshing and avoid synchronization errors caused by mechanical stop and reversal.
- The telescopic system adopts imported accessories, which is stable and has a longer service life.
- Adopting an internal water structure design.
- Significantly increased tap usage time and work efficiency.
SKU: 002-23042608 -
Clamping Head, Clamping Technology
Tap Collet Rigid Tap Chuck Daily Standard Square Tail Hole
- Main features: large clamping force, wide clamping range, comprehensive specifications, high precision.
- Widely used in milling, boring, drilling, tapping, CNC engraving. Spindle machine and other processing industries.
- Clamping tapdoes not slip.
- Precision, fluencyand simplicity.
- Specification clear.
SKU: 002-23042607 -
Inside Measurement, Metrology
American Ring Gauge External Thread Go-No-Go Gauge Tooth Gauge
- XYC ring gauge material-GCR15 (bearing steel); the hardness of the specification ≤3MM is HRC58-65°, and the hardness of >3MM is HRC58-60°.
- GB/T3934 standard is adopted, and the accuracy of the go-no-go end is 6G, and 5H and 6H grades are also available.
- Ring gauge mark: GO is used to detect the through end, and NOGO is used to indicate the stop end.
- Round anti-skid design, high hardness and wear resistance.
SKU: 002-23042605 -
Inside Measurement, Metrology
Metric Thread Ring Gauge Go No-Go Gauge
- XYC ring gauge material-GCR15 (bearing steel); the hardness of the specification ≤3MM is HRC58-65°, and the hardness of >3MM is HRC58-60°.
- GB/T3934 standard is adopted, and the accuracy of the go-no-go end is 6G, and 5H and 6H grades are also available.
- Ring gauge mark: GO is used to detect the through end, and NOGO is used to indicate the stop end.
- Round anti-skid design, high hardness and wear resistance.
SKU: 002-23042604 -
Inside Measurement, Metrology
Internal Thread Fine Thread Go-no-go Gauge Metric Thread Plug Gauge
- The thread plug gauge is used for comprehensive inspection of internal threads, and the thread ring gauge is used for comprehensive inspection of external threads.
- How to identify the plug gauge, the threaded plug gauge is composed of two parts, one is called the through end, and the other is called the stop end.
- The through end part of the plug gauge can be screwed into the thread completely, and the stop part can only be screwed into the thread for 1.5-2 turns to be qualified.
- The hardness of the specification ≤3MM is HRC53-60°, and the hardness of >3MM is HRC58-60°.
- The accuracy of the go-no-go end provides 5H, 6H, and 6G, 7H grades are also available.
- Specifications ≤ M1.4 provide 5H accuracy.
SKU: 002-23042603 -
Inside Measurement, Metrology
American-made Threaded Plug Gauge Bolt Fine Thread High Precision Detection Gauge
Inside Measurement, MetrologyAmerican-made Threaded Plug Gauge Bolt Fine Thread High Precision Detection Gauge
- The thread plug gauge is used for comprehensive inspection of internal threads, and the thread ring gauge is used for comprehensive inspection of external threads.
- How to identify the plug gauge, the threaded plug gauge is composed of two parts, one is called the through end, and the other is called the stop end.
- The through end part of the plug gauge can be screwed into the thread completely, and the stop part can only be screwed into the thread for 1.5-2 turns to be qualified.
- The hardness of the specification ≤3MM is HRC53-60°, and the hardness of >3MM is HRC58-60°.
- The accuracy of the go-no-go end provides 5H, 6H, and 6G, 7H grades are also available.
- Specifications ≤ M1.4 provide 5H accuracy.
SKU: 002-23042602 -
Inside Measurement, Metrology
Thread Go-no-go Gauge Metric Standard Plug Gauge
- The thread plug gauge is used for comprehensive inspection of internal threads, and the thread ring gauge is used for comprehensive inspection of external threads.
- How to identify the plug gauge, the threaded plug gauge is composed of two parts, one is called the through end, and the other is called the stop end.
- The through end part of the plug gauge can be screwed into the thread completely, and the stop part can only be screwed into the thread for 1.5-2 turns to be qualified.
- The hardness of the specification ≤3MM is HRC53-60°, and the hardness of >3MM is HRC58-60°.
- The accuracy of the go-no-go end provides 5H, 6H, and 6G, 7H grades are also available.
- Specifications ≤ M1.4 provide 5H accuracy.
SKU: 002-23042601 -
Solid round tools, Spiral Point, TAPPING
Machine use Pointed Tap Cutting Screw Powder High Speed Steel
Solid round tools, Spiral Point, TAPPINGMachine use Pointed Tap Cutting Screw Powder High Speed Steel
- Pointed tap features: blade inclination angle groove.
- Chips are removed forward.
- Chips are not easily entangled.
- High flexural strength.
- Good cutting performance.
- Thread standard: JIS (Japanese standard).
- Tapping material: powder high speed steel.
- Invalid teeth: 5P.
- Applicable processing environment: through hole.
- The design of the heart diameter is relatively large, the strength is good, and it can withstand large cutting force.
- The effect of processing non-ferrous metals, stainless steel, and ferrous metals is very good, and the screw-tip tap should be preferred for through-hole threads.
- Applicable machine tools: automatic lathes, CNC, milling machines, drilling machines, tapping machines, etc.
SKU: 002-23042107 -
Solid round tools, Spiral Point, TAPPING
Pointed Tap Cutting Fine Tooth Powder High Speed Steel
- Pointed tap features: blade inclination angle groove.
- Chips are removed forward.
- Chips are not easily entangled.
- High flexural strength.
- Good cutting performance.
- Thread standard: JIS (Japanese standard).
- Tapping material: powder high speed steel.
- Invalid teeth: 5P.
- Applicable processing environment: through hole.
- The design of the heart diameter is relatively large, the strength is good, and it can withstand large cutting force.
- The effect of processing non-ferrous metals, stainless steel, and ferrous metals is very good, and the screw-tip tap should be preferred for through-hole threads.
- Applicable machine tools: automatic lathes, CNC, milling machines, drilling machines, tapping machines, etc.
SKU: 002-23042106 -
Solid round tools, Spiral Point, TAPPING
Pointed Taps Tip Tap Powder High Speed Steel
- Pointed tap features: blade inclination angle groove.
- Chips are removed forward.
- Chips are not easily entangled.
- High flexural strength.
- Good cutting performance.
- Thread standard: JIS (Japanese standard).
- Tapping material: powder high speed steel.
- Invalid teeth: 5P.
- Applicable processing environment: through hole.
- The design of the heart diameter is relatively large, the strength is good, and it can withstand large cutting force.
- The effect of processing non-ferrous metals, stainless steel, and ferrous metals is very good, and the screw-tip tap should be preferred for through-hole threads.
- Applicable machine tools: automatic lathes, CNC, milling machines, drilling machines, tapping machines, etc.
SKU: 002-23042105 -
Solid round tools, Spiral Point, TAPPING
Titanium-plated Long Pointed Tap Powder High Speed Steel
- Pointed tap features: blade inclination angle groove.
- Chips are removed forward.
- Chips are not easily entangled.
- High flexural strength.
- Good cutting performance.
- Thread standard: JIS (Japanese standard).
- Tapping material: powder high speed steel.
- Invalid teeth: 5P.
- Applicable processing environment: through hole.
- The design of the heart diameter is relatively large, the strength is good, and it can withstand large cutting force.
- The effect of processing non-ferrous metals, stainless steel, and ferrous metals is very good, and the screw-tip tap should be preferred for through-hole threads.
- Applicable machine tools: automatic lathes, CNC, milling machines, drilling machines, tapping machines, etc.
SKU: 002-23042104 -
Solid round tools, Spiral Point, TAPPING
Titanium-plated Pointed Tap Cutting Tip Wire Tapping Powder High-speed Steel
Solid round tools, Spiral Point, TAPPINGTitanium-plated Pointed Tap Cutting Tip Wire Tapping Powder High-speed Steel
- Pointed tap features: blade inclination angle groove.
- Chips are removed forward.
- Chips are not easily entangled.
- High flexural strength.
- Good cutting performance.
- Thread standard: JIS (Japanese standard).
- Tapping material: powder high speed steel.
- Invalid teeth: 5P.
- Applicable processing environment: through hole.
- The design of the heart diameter is relatively large, the strength is good, and it can withstand large cutting force.
- The effect of processing non-ferrous metals, stainless steel, and ferrous metals is very good, and the screw-tip tap should be preferred for through-hole threads.
- Applicable machine tools: automatic lathes, CNC, milling machines, drilling machines, tapping machines, etc.
SKU: 002-23042103 -
Solid round tools, Spiral Point, TAPPING
Pointed Tap Tip Taps Powder High Speed Steel
- Pointed tap features: blade inclination angle groove.
- Chips are removed forward.
- Chips are not easily entangled.
- High flexural strength.
- Good cutting performance.
- Thread standard: JIS (Japanese standard).
- Tapping material: powder high speed steel.
- Invalid teeth: 5P.
- Applicable processing environment: through hole.
- The design of the heart diameter is relatively large, the strength is good, and it can withstand large cutting force.
- The effect of processing non-ferrous metals, stainless steel, and ferrous metals is very good, and the screw-tip tap should be preferred for through-hole threads.
- Applicable machine tools: automatic lathes, CNC, milling machines, drilling machines, tapping machines, etc.
SKU: 002-23042102 -
Solid round tools, Spiral Point, TAPPING
Pointed Taps Tip Tap Cutting Through Hole Uncoated Powder High Speed Steel
Solid round tools, Spiral Point, TAPPINGPointed Taps Tip Tap Cutting Through Hole Uncoated Powder High Speed Steel
- Pointed tap features: blade inclination angle groove.
- Chips are removed forward.
- Chips are not easily entangled.
- High flexural strength.
- Good cutting performance.
- Thread standard: JIS (Japanese standard).
- Tapping material: powder high speed steel.
- Invalid teeth: 5P.
- Applicable processing environment: through hole.
- The design of the heart diameter is relatively large, the strength is good, and it can withstand large cutting force.
- The effect of processing non-ferrous metals, stainless steel, and ferrous metals is very good, and the screw-tip tap should be preferred for through-hole threads.
- Applicable machine tools: automatic lathes, CNC, milling machines, drilling machines, tapping machines, etc.
SKU: 002-23042101 -
Solid round tools, Spiral Flute, TAPPING
Spiral Tap Blind Hole Machine Tap High-speed Steel Fine Teeth Titanium Plating
Solid round tools, Spiral Flute, TAPPINGSpiral Tap Blind Hole Machine Tap High-speed Steel Fine Teeth Titanium Plating
- Tap features: spiral groove.
- Capable of machining to the bottom of blind holes without leaving chips.
- Easy to thread processing, good cutting performance.
- Thread standard: JIS (Japanese standard).
- Tapping material: powder high speed steel.
- Ineffective teeth: 2.5P.
- Applicable processing environment: blind hole. Chips are curled material.
- Inside pointed tap: Metric system: M8 to M16 American system: 5/16-18 to 5/8-18
- Applicable machine tools: automatic lathes, CNC, milling machines, drilling machines, tapping machines, etc.
SKU: 002-23042004