SKU: SGSF/A-MM-JHP Grooving and Slitting Small Diameter Cutters with MULTIMASTER Threaded Adaptation
Categories: Cut off, slot and groove milling, Indexable Tools, Milling Tools
Cut off, slot and groove milling, Indexable Tools, Milling Tools
SGSF/A-MM-JHP Grooving and Slitting Small Diameter Cutters with MULTIMASTER Threaded Adaptation
Availability:
200 in stock
- Grooving and Slitting Small Diameter Cutters with MULTI-MASTER Threaded Adaptation.
- For best performance use internal coolant with “CH” type shanks.
- Number of inserts.
- Key flat size.
- Master insert identification
Based on 0 reviews
Be the first to review “SGSF/A-MM-JHP Grooving and Slitting Small Diameter Cutters with MULTIMASTER Threaded Adaptation”
You may also like…
-
-
-
Tool Holders, Quick Change Tapping Chuck, DIN 69893 HSK-A, HSK-E, HSK-F
MULTI-MASTER Threaded Connection Shanks MM S-A-HSK A40/A63
Tool Holders, Quick Change Tapping Chuck, DIN 69893 HSK-A, HSK-E, HSK-FMULTI-MASTER Threaded Connection Shanks MM S-A-HSK A40/A63
- MULTI-MASTER threaded connection shanks with an integral HSK DIN 69893 form A tapered adaptation.
- Do not apply lubricant to the threaded connection.
SKU: MULTI-MASTER Threaded Connection Shanks MM S-A-HSK A40/A63 -
Tool Holders, Slotting Cutter Adapters
MM CAB Adapters for Connecting FLEXFIT Shanks and MULTIMASTER Milling Heads
Tool Holders, Slotting Cutter AdaptersMM CAB Adapters for Connecting FLEXFIT Shanks and MULTIMASTER Milling Heads
- Adapters for connecting FLEXFIT shanks and MULTI-MASTER milling heads.
- Do not apply lubricant to the threaded connection .
-
When mounting items with FLEXFIT threaded adaptation to their holders, the mating surfaces and threaded areas must be thoroughly cleaned.
-
Apply appropriate tightening torque to eliminate a gap between the mating faces.
-
Estimated torque values are specified in the TQ_3 parameter.
-
Clamping wrench size.
SKU: MM CAB Adapters for Connecting FLEXFIT Shanks and MULTIMASTER Milling Heads
Related products
-
Indexable Tools, Boring and Reaming Tools, Fine boring tools
CBH-L Boring Tool For Pin Turning （Large Diameter)
Indexable Tools, Boring and Reaming Tools, Fine boring toolsCBH-L Boring Tool For Pin Turning （Large Diameter)
- Each boring head with three different sizes insert holders for different boring ranges.
- Standard insert holder for inserts with lead angle 3°，for a better working performance during bling blind hole boring.
- Insert holder can be mounted in opposite direction to back boring.
- Better connection between insert holder and tool body provides higher tool prigidty and working performance.
- AII DCK-CBH fine boring tools are with internal cooling design,which increases the surface finish and inserts tool life.
SKU: CBH-L Boring Tool For Pin Turning （Large Diameter) -
There are no reviews yet.