SKU: R (drive flange set) Drive Flange Set for SELF-GRIP Slitting Cutters
Categories: Accessories for Toolholder, Tool Holders
Accessories for Toolholder, Tool Holders
R (drive flange set) Drive Flange Set for SELF-GRIP Slitting Cutters
Availability:
200 in stock
- Drive Flange Set for Slitting Cutters.
Based on 0 reviews
Be the first to review “R (drive flange set) Drive Flange Set for SELF-GRIP Slitting Cutters”
You may also like…
-
Indexable Tools, Milling Tools, Cut off, slot and groove milling
TGSF Slitting Cutters Carrying TANG-GRIP Inserts
Indexable Tools, Milling Tools, Cut off, slot and groove millingTGSF Slitting Cutters Carrying TANG-GRIP Inserts
- Slitting Cutters Carrying TANG-GRIP Inserts.
- ETG extractor should be ordered separately.
- For drive flange set dimensions, refer to Drive Flange R.
SKU: TGSF Slitting Cutters Carrying TANG-GRIP Inserts -
Indexable Tools, Milling Tools, Cut off, slot and groove milling
SGSF Slitting Cutters Carrying Self-Clamped Inserts
Indexable Tools, Milling Tools, Cut off, slot and groove millingSGSF Slitting Cutters Carrying Self-Clamped Inserts
-
Slitting cutters carrying SELF-GRIP inserts.
-
Only the K type cutters feature 4 driving holes around the central hole; they can be driven by the R drive shanks.
- Refer to SW/S drive shanks and R driving flange set.
- Maximum RPM may not be exceeded.
SKU: SGSF Slitting Cutters Carrying Self-Clamped Inserts -
Related products
-
Clamping Technology, Tool Holders, Slotting Cutter Adapters, JIS (MAS 403) BT30/BT40/BT50
BT 2° Side Lock Holders
Clamping Technology, Tool Holders, Slotting Cutter Adapters, JIS (MAS 403) BT30/BT40/BT50BT 2° Side Lock Holders
- Tool holding device: BT30-50.
- Bore holes for data carriers according to JIS B6339.
- Run-out accuracy ≤ 0.003 mm measured from taper
to D1. - Balancing grade G2.5 at 25,000 RPM or Umax < 1 gmm.
SKU: BT 2° Side Lock Holders -
Clamping Technology, Tool Holders, Face Mill Arbor, DIN 69893 HSK-A, HSK-E, HSK-F
Shell Mill Hoiders
- Tool holding device: HSK 63A-100A.
- Bore holes for data carriers according to DIN 69893.
- Fine balanced at G 2.5 at 25,000 rpm.
- High runout accuracy (< 0.003 mm).
- Highest rigidity.
- Highest clamping forces.
SKU: Shell Mill Hoiders -
Clamping Technology, Tool Holders, Collet Chucks, JIS (MAS 403) BT30/BT40/BT50
BT30 ER Collet Chucks
- Tool holding device: BT30.
- Bore holes for data carriers according to JIS B6339.
- Fine balanced at G 2.5 at 25,000 rpm.
- High runout accuracy (< 0.003 mm).
- Highest rigidity.
- Highest clamping forces.
SKU: BT30 ER Collet Chucks
There are no reviews yet.