Hole tolerance: D+0.10/-0.05 in average conditions. However, it can be higher or lower according to machine and tooling conditions.Intermediate sizes are available on request.
Drilling Tools, Indexable insert drills, Indexable Tools
MNC-7/8D Large Diameter Indexable Drills for the Wind Turbine Industry
Availability:
200 in stock
- Large Diameter Indexable Drills for the Wind Turbine Industry.
- As the drill is fully effective, it enables high feed drilling, providing high drilling rates, and high accuracy and surface finish.
Hole tolerance: D+0.10/-0.05 in average conditions. However, it can be higher or lower according to machine and tooling conditions.Intermediate sizes are available on request.
Based on 0 reviews
Be the first to review “MNC-7/8D Large Diameter Indexable Drills for the Wind Turbine Industry”
You may also like…
-
Indexable Tools, Drilling Tools, Indexable insert drills
SOGT-W Precision Ground Inserts for MNC Drills with DT General Use Chipformer and a Wiper
Indexable Tools, Drilling Tools, Indexable insert drillsSOGT-W Precision Ground Inserts for MNC Drills with DT General Use Chipformer and a Wiper
- Precision Ground Inserts with DT General Use Chipformer and a Wiper for MNC Drills.
SKU: SOGT-W Precision Ground Inserts for MNC Drills with DT General Use Chipformer and a Wiper -
Indexable Tools, Drilling Tools, Exchangeable head drills
HCP-IQ Exchangeable DCN Drill Self-Centering Heads for Alloy Steel and Cast Iron
Indexable Tools, Drilling Tools, Exchangeable head drillsHCP-IQ Exchangeable DCN Drill Self-Centering Heads for Alloy Steel and Cast Iron
- Exchangeable DCN Drill Self-Centering Heads for Alloy Steel and Cast Iron.
- The HCP drilling heads enable drilling with 12xD drills without the need for pre-hole preparation.
- The drills can be used in clad plates. The 12 L/D ratio drills are commonly used in the heat exchanger and other industries.
- HCP geometry is designed with concave cutting edges, this substantially enhances the self-centering capability of the drill, which enables using long drills (up to 12XD), without a pilot hole operation.
SKU: HCP-IQ Exchangeable DCN Drill Self-Centering Heads for Alloy Steel and Cast Iron
Related products
-
Indexable Tools, Boring and Reaming Tools, Fine boring tools
NBH2084 Micro-boring Head
- Each boring head with three different sizes insert holders for different boring ranges.
- Standard insert holder for inserts with lead angle 3°，for a better working performance during bling blind hole boring.
- Insert holder can be mounted in opposite direction to back boring.
- Better connection between insert holder and tool body provides higher tool prigidty and working performance.
- AII DCK-CBH fine boring tools are with internal cooling design,which increases the surface finish and inserts tool life.
SKU: NBH2084 Micro-boring Head -
Indexable Tools, Boring and Reaming Tools, Fine boring tools
FBH Micro-boring Head
- Adjustment precision 0.002 mm diameter.
- One boring body with insert hoder or boring bar can be for boring and back boring.
- Standard insert holder for inserts with lead 3°，for a better working performance during bling hole boring.
- The extensive area serrated with connection between insert holder and tool body provides higher tool rigidity and working performance.
- All DCK-FBH fine boring tools are with intemal cooling design,which increases the surface finish and inserts tool life.
SKU: FBH Micro-boring Head -
Indexable Tools, Boring and Reaming Tools, Fine boring tools
DBJ10 Micro-boring Bar
- Adjustment Precision 0.002 mm on Diameter.
- One Boring Body With Ineert Holder or Boring Bar Can Be For Boing And Back Boring.
- Standaed insert HoIder For Inserts With lead Angle 3°，For a Better Working Performance During Blind Hole Boring.
- The extensive Area Serrated With connection Between insert Holder And Tool Body Provides Higer Tool Rigity And Working Performance.
SKU: DBJ10 Micro-boring Bar
There are no reviews yet.