Collet Chucks, Tool Holders
MEGA ER GRIP Collet Chuck System With Stopper
Availability:
200 in stock
- Flat is provided on the shank to be mounted in the tool post of the NC lathe directly.
| Brands | |
|---|---|
| Units of length |
Based on 0 reviews
Be the first to review “MEGA ER GRIP Collet Chuck System With Stopper”
Related products
-
Clamping Technology, Tool Holders, Morse Taper Adapters, JIS (MAS 403) BT30/BT40/BT50
BT Morse Taper Holders without Tang
Clamping Technology, Tool Holders, Morse Taper Adapters, JIS (MAS 403) BT30/BT40/BT50BT Morse Taper Holders without Tang
- Morse Taper Holders without Tang.
- Bore holes for data carriers according to JIS B6339.
- Chuck body balanced G6.3 8000 1/min.
- All functional surfaces fine machined.
- Taper tolerance AT3.
SKU: BT Morse Taper Holders without Tang -
Clamping Technology, Tool Holders, Slotting Cutter Adapters, JIS (MAS 403) BT30/BT40/BT50
BT 2° Side Lock Holders
Clamping Technology, Tool Holders, Slotting Cutter Adapters, JIS (MAS 403) BT30/BT40/BT50BT 2° Side Lock Holders
- Tool holding device: BT30-50.
- Bore holes for data carriers according to JIS B6339.
- Run-out accuracy ≤ 0.003 mm measured from taper
to D1. - Balancing grade G2.5 at 25,000 RPM or Umax < 1 gmm.
SKU: BT 2° Side Lock Holders -
Clamping Technology, Tool Holders, Slotting Cutter Adapters, DIN 69893 HSK-A, HSK-E, HSK-F
TMG21 Main Handle Module
Clamping Technology, Tool Holders, Slotting Cutter Adapters, DIN 69893 HSK-A, HSK-E, HSK-FTMG21 Main Handle Module
- Tool holding device: HSK 63A-100A.
- Bore holes for data carriers according to DIN 69893.
- Fine balanced at G 2.5 at 25,000 rpm.
- High runout accuracy (< 0.003 mm).
- Highest rigidity.
- Highest clamping forces.
SKU: TMG21 Main handle module
There are no reviews yet.