(1) Cutting diameter minimum (2) Cutting diameter maximum
Boring and Reaming Tools, Boring Holder & ACCESSORIES, Indexable Tools
IHSR-C Rhombic Roughing Insert Holders for BHC Combi Boring Heads
Availability:
200 in stock
- Rhombic roughing insert holders for BHC combi boring heads.
Based on 0 reviews
Be the first to review “IHSR-C Rhombic Roughing Insert Holders for BHC Combi Boring Heads”
You may also like…
-
Indexable Tools, TURNING TOOLS, Turning Inserts
CCGT-AF 80° Rhombic Inserts with a 7° Positive Flank, Very Positive Rake Angle and Sharp Cutting Edge for Machining Aluminum
Indexable Tools, TURNING TOOLS, Turning InsertsCCGT-AF 80° Rhombic Inserts with a 7° Positive Flank, Very Positive Rake Angle and Sharp Cutting Edge for Machining Aluminum
- 80° Rhombic Inserts with a 7° Positive Flank, Very Positive Rake Angle and Sharp Cutting Edge for Machining Aluminum.
SKU: CCGT-AF 80° Rhombic Inserts with a 7° Positive Flank, Very Positive Rake Angle and Sharp Cutting Edge for Machining Aluminum -
Indexable Tools, TURNING TOOLS, Turning Inserts
CCGW/CCMT (CBN) 80° Rhombic Inserts with a Single CBN Top Corner Tip and 7° Clearance for Machining Hardened Steel
Indexable Tools, TURNING TOOLS, Turning InsertsCCGW/CCMT (CBN) 80° Rhombic Inserts with a Single CBN Top Corner Tip and 7° Clearance for Machining Hardened Steel
- 80° rhombic inserts with CBN single top corner brazed tip, used for finishing forged steel.
SKU: CCGW/CCMT (CBN) 80° Rhombic Inserts with a Single CBN Top Corner Tip and 7° Clearance for Machining Hardened Steel -
Indexable Tools, TURNING TOOLS, Turning Inserts
CCMT-14 80° Rhombic Inserts with a 7° Positive Flank for Semi- Finishing and Finish Turning
Indexable Tools, TURNING TOOLS, Turning InsertsCCMT-14 80° Rhombic Inserts with a 7° Positive Flank for Semi- Finishing and Finish Turning
- 80° Rhombic Inserts with a 7° Positive Flank for Semi-Finishing and Finish Turning.
SKU: CCMT-14 80° Rhombic Inserts with a 7° Positive Flank for Semi- Finishing and Finish Turning -
Indexable Tools, TURNING TOOLS, Turning Inserts
CCMT-WG 80° Rhombic Inserts with a 7° Positive Flank and a Wiper Near the Corner for High Feed Finishing
Indexable Tools, TURNING TOOLS, Turning InsertsCCMT-WG 80° Rhombic Inserts with a 7° Positive Flank and a Wiper Near the Corner for High Feed Finishing
- 80° Rhombic Inserts with a 7° Positive Flank and a Wiper Near the Corner for High Feed Finishing.
SKU: CCMT-WG 80° Rhombic Inserts with a 7° Positive Flank and a Wiper Near the Corner for High Feed Finishing
There are no reviews yet.