(1) Minimum cutting width
(2) Maximum cutting width
Boring Bars, Indexable Tools, TURNING TOOLS
HFIR/L-MC Boring Bars for Internal Grooving and Turning
Availability:
200 in stock
- Boring Bars for Internal Grooving and Turning.
- DGN & GRIP 4.. – 6.. inserts can be used only with right-hand tools, HGPL 4.. – 6.. inserts with left-hand tools.
- After initial groove, no limitation to widening groove outward or toward center.
Based on 0 reviews
0.0 overall
0
0
0
0
0
Be the first to review “HFIR/L-MC Boring Bars for Internal Grooving and Turning” Cancel reply
You may also like…
-
Indexable Tools, Parting And Grooving Tools, Grooving Inserts
GRIP (full radius) Utility Double-Ended Full Radius Inserts for External, Internal and Face Machining
Indexable Tools, Parting And Grooving Tools, Grooving InsertsGRIP (full radius) Utility Double-Ended Full Radius Inserts for External, Internal and Face Machining
0 out of 5(0)- Utility Double-Ended Full Radius Inserts for External, Internal and Face Machining.
SKU: GRIP (full radius) Utility Double-Ended Full Radius Inserts for External, Internal and Face Machining -
Indexable Tools, Parting And Grooving Tools, Grooving Inserts
HFPR/L (full radius) Utility Double-Ended Full Radius Face Machining Inserts
-
Indexable Tools, Parting And Grooving Tools, Grooving Inserts
DGN-MF Double-Sided Inserts for Parting and Grooving Soft and Hard Materials at Medium Feeds
Indexable Tools, Parting And Grooving Tools, Grooving InsertsDGN-MF Double-Sided Inserts for Parting and Grooving Soft and Hard Materials at Medium Feeds
0 out of 5(0)- Double-Sided Inserts for Parting and Grooving Soft and Hard Materials at Medium Feeds.
SKU: DGN-MF Double-Sided Inserts for Parting and Grooving Soft and Hard Materials at Medium Feeds -
Indexable Tools, Parting And Grooving Tools, Grooving Inserts
DGN/DGNM-J/JS/JT Double-Sided Inserts for Parting and Grooving Soft Materials, Parting Tubes, Small Diameters and Thin-Walled Parts
Indexable Tools, Parting And Grooving Tools, Grooving InsertsDGN/DGNM-J/JS/JT Double-Sided Inserts for Parting and Grooving Soft Materials, Parting Tubes, Small Diameters and Thin-Walled Parts
0 out of 5(0)- Double-Sided Inserts for Parting and Grooving Soft Materials, Parting Tubes, Small Diameters and Thin-Walled Parts.
- JT chipformer has the basic positive configuration of the J-type and a reinforced negative frontal edge; most suitable for soft materials at low to medium feeds.
SKU: DGN/DGNM-J/JS/JT Double-Sided Inserts for Parting and Grooving Soft Materials, Parting Tubes, Small Diameters and Thin-Walled Parts
Related products
-
Indexable Tools, Boring and Reaming Tools, Fine boring tools
DBJ10/12/16 Micro-boring head
0 out of 5(0)- Each boring head with three different sizes insert holders for different boring ranges.
- Standard insert holder for inserts with lead angle 3°,for a better working performance during bling blind hole boring.
- Insert holder can be mounted in opposite direction to back boring.
- Better connection between insert holder and tool body provides higher tool prigidty and working performance.
- AII DCK-CBH fine boring tools are with internal cooling design,which increases the surface finish and inserts tool life.
SKU: DBJ10/12/16 Micro-boring head$10.00 – $13.00 -
Indexable Tools, Boring and Reaming Tools, Fine boring tools
DBJ12 Micro-boring Bar
0 out of 5(0)- Adjustment Precision 0.002 mm on Diameter.
- One Boring Body With Ineert Holder or Boring Bar Can Be For Boing And Back Boring.
- Standaed insert HoIder For Inserts With lead Angle 3°,For a Better Working Performance During Blind Hole Boring.
- The extensive Area Serrated With connection Between insert Holder And Tool Body Provides Higer Tool Rigity And Working Performance.
SKU: DBJ12 Micro-boring Bar$8.00 – $16.00 -
Indexable Tools, Boring and Reaming Tools, Fine boring tools
NBH2084 Micro-boring Head
0 out of 5(0)- Each boring head with three different sizes insert holders for different boring ranges.
- Standard insert holder for inserts with lead angle 3°,for a better working performance during bling blind hole boring.
- Insert holder can be mounted in opposite direction to back boring.
- Better connection between insert holder and tool body provides higher tool prigidty and working performance.
- AII DCK-CBH fine boring tools are with internal cooling design,which increases the surface finish and inserts tool life.
SKU: NBH2084 Micro-boring Head$210.00$280.00 -
Indexable Tools, Boring and Reaming Tools, Fine boring tools
CBH Finish Borng Tool
0 out of 5(0)1.Each boring head with three different sizes insert holders for different boring ranges.
2.Standard insert holder for inserts with lead angle 3°,for a better working performance during bling blind hole boring.
3.Insert holder can be mounted in opposite direction to back boring.
4.Better connection between insert holder and tool body provides higher tool prigidty and working performance.
5.AII DCK-CBH fine boring tools are with internal cooling design,which increases the surface finish and inserts tool lifeSKU: CBH Finish Borng Tool$15.00 – $35.00
There are no reviews yet.