(1) Sharp corners
(2) Single-ended insert
(3) Cutting width tolerance (+/-)
(4) Corner radius tolerance (+/-)
(5) Cutting depth maximum
(6) No depth limit
Grooving Inserts, Indexable Tools, Parting And Grooving Tools
DGN/DGNM-J/JS/JT Double-Sided Inserts for Parting and Grooving Soft Materials, Parting Tubes, Small Diameters and Thin-Walled Parts
Availability:
200 in stock
- Double-Sided Inserts for Parting and Grooving Soft Materials, Parting Tubes, Small Diameters and Thin-Walled Parts.
- JT chipformer has the basic positive configuration of the J-type and a reinforced negative frontal edge; most suitable for soft materials at low to medium feeds.
| Brands | |
|---|---|
| Units of length | |
| Workpiece Material | Aluminium (N), Cast Iron (K), Hardened Steel (H), Heat-resistant Alloy and Titanium Alloy (S), Stainless Steel (M), Steel (P) |
Based on 0 reviews
Be the first to review “DGN/DGNM-J/JS/JT Double-Sided Inserts for Parting and Grooving Soft Materials, Parting Tubes, Small Diameters and Thin-Walled Parts”
You may also like…
-
Indexable Tools, Parting And Grooving Tools, External grooving, Parting off tools
DGTR/L-B-D-SH Parting and Grooving Short Head Tools for CNC and Swiss Automatics
Indexable Tools, Parting And Grooving Tools, External grooving, Parting off toolsDGTR/L-B-D-SH Parting and Grooving Short Head Tools for CNC and Swiss Automatics
- Parting and Grooving Short Head Tools for CNC and Swiss Automatics.
- DGN/R/L 1 mm inserts can also be mounted into pocket sizes 2 and 3.
SKU: DGTR/L-B-D-SH Parting and Grooving Short Head Tools for CNC and Swiss Automatics -
Indexable Tools, Parting And Grooving Tools, Face grooving
HFHR/L-5T Integral Holders for Facing, DAXN. 25 mm
Indexable Tools, Parting And Grooving Tools, Face groovingHFHR/L-5T Integral Holders for Facing, DAXN. 25 mm
- Integral Holders for Facing, Dmin. 25 mm.
- DGN & GRIP 5.. inserts can be used only with right-hand tools, HGPL 5.. inserts with left-hand tools.
SKU: HFHR/L-5T Integral Holders for Facing, DAXN. 25 mm -
Indexable Tools, Parting And Grooving Tools, Face grooving
HFAIR/L-DG Adapters for Internal Face Grooving and Turning
Indexable Tools, Parting And Grooving Tools, Face groovingHFAIR/L-DG Adapters for Internal Face Grooving and Turning
- Adapters for Internal Face Grooving and Turning.
- After initial groove, no limitation to widening groove outward or toward center.
- DGN inserts can be used on right- and left-hand tools.
- GRIP inserts only on right-hand tools.
- HFPR/L right-hand inserts on right-hand tools (same for left-hand), and HGPL inserts only on left-hand tools.
SKU: HFAIR/L-DG Adapters for Internal Face Grooving and Turning -
Indexable Tools, TURNING TOOLS, Boring Bars
C#-HFIR/L-MC Boring Bars for Internal Grooving and Turning with CAMFIX Exchangeable Shanks
Indexable Tools, TURNING TOOLS, Boring BarsC#-HFIR/L-MC Boring Bars for Internal Grooving and Turning with CAMFIX Exchangeable Shanks
- Boring Bars for Internal Grooving and Turning with CAMFIX Exchangeable Shanks.
- DGN & GRIP 4.. – 6.. inserts can be used only with right-hand tools, HGPL 4.. – 6.. inserts with left-hand tools.
- After initial groove, no limitation to widening groove outward or toward center.
SKU: C#-HFIR/L-MC Boring Bars for Internal Grooving and Turning with CAMFIX Exchangeable Shanks
Related products
-
-
Indexable Tools, Boring and Reaming Tools, Fine boring tools
CBH Finish Borng Tool
1.Each boring head with three different sizes insert holders for different boring ranges.
2.Standard insert holder for inserts with lead angle 3°，for a better working performance during bling blind hole boring.
3.Insert holder can be mounted in opposite direction to back boring.
4.Better connection between insert holder and tool body provides higher tool prigidty and working performance.
5.AII DCK-CBH fine boring tools are with internal cooling design,which increases the surface finish and inserts tool lifeSKU: CBH Finish Borng Tool -
Indexable Tools, Boring and Reaming Tools, Fine boring tools
FBH32P Micro-finishing Boring Kit
- Adjustment Precision 0.002 mm on Diameter
- One Boring Body With Ineert Holder or Boring Bar Can Be For Boing And Back Boring
- Standaed insert HoIder For Inserts With lead Angle 3°，For a Better Working Performance During Blind Hole Boring.
- The extensive Area Serrated With connection Between insert Holder And Tool Body Provides Higer Tool Rigity And Working Performance.
- All DCK-FBH Fine Boring Tools Are With internal Cooling Design,Which increases The Surface Finish And inserts Tool Life
SKU: Micro-finishing Boring Kit -
Indexable Tools, Boring and Reaming Tools, Fine boring tools
NBH2084 Micro-Boring Tool Kit
- Each boring head with three different sizes insert holders for different boring ranges.
- Standard insert holder for inserts with lead angle 3°，for a better working performance during bling blind hole boring.
- Insert holder can be mounted in opposite direction to back boring.
- Better connection between insert holder and tool body provides higher tool prigidty and working performance.
- AII DCK-CBH fine boring tools are with internal cooling design,which increases the surface finish and inserts tool life.
SKU: NBH2084 Micro-Boring Tool Kit
There are no reviews yet.