SKU: ETS-LN08-MM Grooving and Slitting Cutters with MULTI-MASTER Threaded Adaptation
Categories: Cut off, slot and groove milling, Indexable Tools, Milling Tools
Cut off, slot and groove milling, Indexable Tools, Milling Tools
ETS-LN08-MM Grooving and Slitting Cutters with MULTI-MASTER Threaded Adaptation
Availability:
200 in stock
- Grooving and Slitting Cutters with MULTI-MASTER Threaded Adaptation.
Based on 0 reviews
Be the first to review “ETS-LN08-MM Grooving and Slitting Cutters with MULTI-MASTER Threaded Adaptation”
You may also like…
-
-
Tool Holders, Weldon Tool Holder
89° Conical Shanks MM S-D (89° conical shanks)
-
MULTI-MASTER, 89° conical shanks for solid carbide interchangeable milling heads.
-
Available are steel, solid carbide and tungsten shank materials.
-
Tungsten shanks have coolant holes.
-
Do not apply lubricant to the threaded connection.
-
Shank Material (Shank m.): S-steel,C-carbide,W-tungsten.
SKU: 89° Conical Shanks MM S-D (89° conical shanks) -
-
Tool Holders, Slotting Cutter Adapters
Cylindrical Shanks MM TS-A-L..
- MULTI-MASTER cylindrical shanks for interchangeable milling heads.
-
Do not apply lubricant to the threaded connection.
- S-steel, C-carbide.
- The actual maximum RPM should be calculated by dividing the listed RPM max by the number of the head’s flutes being used.
- 0 – Without coolant supply, 1 – With coolant supply.
SKU: Cylindrical Shanks MM TS-A-L.. -
Tool Holders, Collet Chucks
MULTI-MASTER Shanks MM S-ER
- Shanks for MULTI-MASTER solid carbide heads with an ER collet adaptation.
- Do not apply lubricant to the threaded connection.
-
When a rigid ER collet is assembled in an ER holder, the actual protruding length of the holder becomes shorter by 2.0 mm for ER20 and by 3.0 mm for ER25/ER32.
SKU: MULTI-MASTER Shanks MM S-ER
Related products
-
Indexable Tools, Boring and Reaming Tools, Fine boring tools
FBH63P Micro-Flnishing Boring Kit
- Adjustment Precision 0.002 mm on Diameter
- One Boring Body With Ineert Holder or Boring Bar Can Be For Boing And Back Boring
- Standaed insert HoIder For Inserts With lead Angle 3°，For a Better Working Performance During Blind Hole Boring.
- The extensive Area Serrated With connection Between insert Holder And Tool Body Provides Higer Tool Rigity And Working Performance.
- All DCK-FBH Fine Boring Tools Are With internal Cooling Design,Which increases The Surface Finish And inserts Tool Life
SKU: Micro-Flnishing Boring Kit -
Indexable Tools, Boring and Reaming Tools, Fine boring tools
CBH-M Boring Tool For Pin Turning
- Each boring head with three different sizes insert holders for different boring ranges.
- Standard insert holder for inserts with lead angle 3°，for a better working performance during bling blind hole boring.
- Insert holder can be mounted in opposite direction to back boring.
- Better connection between insert holder and tool body provides higher tool prigidty and working performance.
- AII DCK-CBH fine boring tools are with internal cooling design,which increases the surface finish and inserts tool life.
SKU: CBH-M Boring Tool For Pin Turning -
Indexable Tools, Boring and Reaming Tools, Fine boring tools
DBJ12 Micro-boring Bar
- Adjustment Precision 0.002 mm on Diameter.
- One Boring Body With Ineert Holder or Boring Bar Can Be For Boing And Back Boring.
- Standaed insert HoIder For Inserts With lead Angle 3°，For a Better Working Performance During Blind Hole Boring.
- The extensive Area Serrated With connection Between insert Holder And Tool Body Provides Higer Tool Rigity And Working Performance.
SKU: DBJ12 Micro-boring Bar -
There are no reviews yet.