SKU: Drilling Tools GD series General machining(d1 15.1~18.0mm)
Categories: DRILLING, Solid round tools, Taper (8D - 30D)
DRILLING, Solid round tools, Taper (8D - 30D)
Drilling Tools GD series General machining(d1 15.1~18.0mm)
Availability:
200 in stock
- Suitable for high effificiency drilling in a variety of materials e.g steel, stainless steel, cast iron.
| Brands | |
|---|---|
| Units of length | |
| Workpiece Material |
Based on 0 reviews
Be the first to review “Drilling Tools GD series General machining(d1 15.1~18.0mm)”
Related products
-
Solid round tools, Solid Milling, Roughing
SOLID CARBIDE ENDMILLS UPN210-S4 4 Flute Square End, With Roughing Geometry
Solid round tools, Solid Milling, RoughingSOLID CARBIDE ENDMILLS UPN210-S4 4 Flute Square End, With Roughing Geometry
● Suitable for roughing machining of steels﹠cast iron(≤48HRC).
● Cutting edge with Special chip-breaking design, suitable for groove
and side wall roughing.SKU: UPN210-S4 4 Flute Square End, with Roughing Geometry -
Solid round tools, Solid Milling, Square
SOLID CARBIDE ENDMILLS SP210-CN4 4 Flute, With Variable Helix And Reduced Neck（Chamfered Corner）
Solid round tools, Solid Milling, SquareSOLID CARBIDE ENDMILLS SP210-CN4 4 Flute, With Variable Helix And Reduced Neck（Chamfered Corner）
● Suitable for high efficiency efficient machining of steels
﹠cast iron (≤48HRC).
● Variable helix angle and unequal flute pitch with
excellent anti-vibration capacity.
● Applicable to high efficiency efficient machining of large
cutting depth（ap）, large cutting width（ap）(Machine
with good rigidity).SKU: 4 Flute, with Variable Helix and Reduced Neck（Chamfered Corner） -
Solid round tools, Solid Milling, Square
SOLID CARBIDE ENDMILLS US300-S4 4 Flute, Standard Length
● Suitable for rough milling, semi-finishing and finishing of stainless
steel(<280HB).
● Design for the small depth/large width in face milling, large depth/
small width in side milling, less than 0.3D inshallow slotting.SKU: US300-S4 4 Flute, Standard Length -
Solid round tools, Solid Milling, Square
SOLID CARBIDE ENDMILLS UA100-SL3 3 Flute, Long Flute Length
● Suitable for aluminum alloy (Si ≤ 12%) and copper alloy (< 200HB) general
processing.
● Special edge design prevents vibration and effectively solves the crumbs.
● Water cooling is the best cooling method.SKU: UA100-SL3 3 Flute, Long Flute Length
There are no reviews yet.