• Hole tolerance D+0.25/-0.05 in average conditions. However it can be higher or lower according to machine and tooling conditions.
(1) The hole diameter can be enlarged by shifting the drill center along the lathe X-axis, or by using eccentric sleeves in drill rotating applications
Drilling Tools, Indexable insert drills, Indexable Tools
DR-3D-N Indexable Square Insert Drills with Coolant Holes, Drilling Depth 3xD
Availability:
200 in stock
- Indexable Square Insert Drills with Coolant Holes, Drilling Depth 3xD.
- The new drills are available in drilling depth to diameter ratio of 3xD and in a diameter range of 12 to 60 mm.
- The new drills are available in whole metric sizes as well as half sizes in the above-mentioned range.
- It shows a substantial advantage over the current grades being used and should be used for the outer pocket on DR drills.
Brands | |
---|---|
Units of length | |
Workpiece Material | Hardened Steel (H), Heat-resistant Alloy and Titanium Alloy (S), Stainless Steel (M), Steel (P) |
Based on 0 reviews
Be the first to review “DR-3D-N Indexable Square Insert Drills with Coolant Holes, Drilling Depth 3xD”
You may also like…
-
Indexable Tools, Drilling Tools, Inserts
SOMT-GF Inserts for DR Drills for Soft Materials at Low-to-Medium Feeds
Indexable Tools, Drilling Tools, InsertsSOMT-GF Inserts for DR Drills for Soft Materials at Low-to-Medium Feeds
- Inserts for DR Drills for Soft Materials at Low-to-Medium Feeds.
- DR drills carry square inserts with 4 cutting edges and variety of chipformers for machining a wide range of materials.
SKU: SOMT-GF Inserts for DR Drills for Soft Materials at Low-to-Medium Feeds -
Indexable Tools, Drilling Tools, Inserts
SOMT-DT Inserts for DR Drills for General Applications at Medium-to-High Feeds
Indexable Tools, Drilling Tools, InsertsSOMT-DT Inserts for DR Drills for General Applications at Medium-to-High Feeds
- Inserts for DR Drills for General Applications at Medium-to-High Feeds.
- DR drills carry square inserts with 4 cutting edges and variety of chipformers for machining a wide range of materials.
SKU: SOMT-DT Inserts for DR Drills for General Applications at Medium-to-High Feeds -
Indexable Tools, Drilling Tools, Inserts
SOMX-GF Inserts with a GF Chipformer for Soft Materials Used on DR Drills
Indexable Tools, Drilling Tools, InsertsSOMX-GF Inserts with a GF Chipformer for Soft Materials Used on DR Drills
- Inserts with a GF Chipformer for Soft Materials Used on DR Drills.
- DR drills carry square inserts with 4 cutting edges and variety of chipformers for machining a wide range of materials.
SKU: SOMX-GF Inserts with a GF Chipformer for Soft Materials Used on DR Drills -
Indexable Tools, Drilling Tools, Inserts
SOMX-HD Inserts for DR Drills for Carbon Steel and Soft Materials
Indexable Tools, Drilling Tools, InsertsSOMX-HD Inserts for DR Drills for Carbon Steel and Soft Materials
- Inserts for DR Drills for Carbon Steel and Soft Materials.
- DR drills carry square inserts with 4 cutting edges and variety of chipformers for machining a wide range of materials.
SKU: SOMX-HD Inserts for DR Drills for Carbon Steel and Soft Materials
There are no reviews yet.