-20%
Calipers
Digital Calipers (zero type)
Availability:
100 in stock
- Absolute zero type caliper is the new type digital caliper.
- The absolute zero type caliper can continually track the zero point. Whenever you turn on,the screen can read the position size.
- For the convient measurement.
- The absolute zero type caliper needn’t to be adjusted from time to time Also it wouldn’t cause fault by fast checking.
$80.00 $100.00
| Brands | |
|---|---|
| Ordering Code : Digital calipers #SHTOOLS | |
| VALUE | |
| Units of length |
Based on 0 reviews
Be the first to review “Digital Calipers (zero type)”
Related products
-
Calipers
Vernier Universal Bevel Protractor
- According with GB／T6092 or GB/T6315 or D1N875 or BS939 respectively.
- Made of carbon steel or stainless steel.
- The beam and the slide are entirely heat-treated, all the measuring faces are hardened.
- Special requirement can be satisfied at request.
SKU: Vernier Universal Bevel Protractor -
Metrology, Calipers
Three Buttons Digital Calipers
- Absolute zero type caliper is the new type digital caliper.
- The absolute zero type caliper can continually track the zero point. Whenever you turn on,the screen can read the position size.
- For the convient measurement.
- The absolute zero type caliper needn’t to be adjusted from time to time Also it wouldn’t cause fault by fast checking.
SKU: Three Buttons Digital Calipers -
Calipers
Vernier Caliper-Carbon Steel/Stainless
- The products are according with GB/T21389 D1N862 or JIS B 7507 or Q/321282JLC03 respectively.
- Made of carbon steel or stainless steel.
- The main scale and the vernier are satin chromed.
- The beam and the vernier are entirely heat-terated,and all the measuring faces are specially hardened.
- Special requirement can be satisfied at request.
SKU: Vernier Caliper-Carbon Steel/Stainless -
Metrology, Calipers
Mitutoyo 500-196-30 electronic caliper industrial grade 0-300mm Digital Display vernier Caliper
Metrology, CalipersMitutoyo 500-196-30 electronic caliper industrial grade 0-300mm Digital Display vernier Caliper
-
Large and clear LCD readout.
-
The ZERO/ABS key allows the display to be zero-set at any slider position along the scale for incremental comparison
measurements. This switch also will allow return to the absolute (ABS) coordinate and display of the true position from the
origin point (usually jaws-closed point). -
Data Hold Unit (959143) is optional.
-
Carbide-tipped jaw-type calipers are also available.
-
Thumb roller included only on calipers up to and including 12” or 300mm.
-
Supplied in fitted plastic case. Except 40” / 1000mm supplied in wooden case.
SKU: n/a -
There are no reviews yet.