(1) Cutting width tolerance (+/-)
(2) Corner radius tolerance (+/-)
(3) Cutting depth maximum
(4) No depth limit
Grooving Inserts, Indexable Tools, Parting And Grooving Tools
DGN-UT/UA Double-Sided Inserts for Parting and Grooving Cr-Ni Alloys, Low Carbon Steel and Ductile Materials at Low Feeds
Availability:
200 in stock
- Double-Sided Inserts for Parting and Grooving Cr-Ni Alloys, Low Carbon Steel and Ductile Materials at Low Feeds.
Brands | |
---|---|
Units of length | |
Workpiece Material | Aluminium (N), Hardened Steel (H), Heat-resistant Alloy and Titanium Alloy (S), Stainless Steel (M), Steel (P) |
Based on 0 reviews
Be the first to review “DGN-UT/UA Double-Sided Inserts for Parting and Grooving Cr-Ni Alloys, Low Carbon Steel and Ductile Materials at Low Feeds”
You may also like…
-
Indexable Tools, Parting And Grooving Tools, External grooving, Parting off tools
DGFHL-26B-TR-D Reinforced Type Blades with Screw Clamping for Traub and Index Machines
Indexable Tools, Parting And Grooving Tools, External grooving, Parting off toolsDGFHL-26B-TR-D Reinforced Type Blades with Screw Clamping for Traub and Index Machines
- Reinforced Type Blades with Screw Clamping for TRAUB and Index Machines.
- Insert limit is Tmax=18 mm. If deeper penetration is required, the insert should be modified into single-ended by the user.
- DG..1.0 insert can be mounted into pocket sizes 2 and 3, in which case the pocket width has to be modified.
SKU: DGFHL-26B-TR-D Reinforced Type Blades with Screw Clamping for Traub and Index Machines -
Indexable Tools, Parting And Grooving Tools, External grooving, Parting off tools
DGTR/L Integral Shank Parting and Grooving Tools
Indexable Tools, Parting And Grooving Tools, External grooving, Parting off toolsDGTR/L Integral Shank Parting and Grooving Tools
- Integral shank parting and grooving tools.
- Insert limit is Tmax=18 mm. If deeper penetration is required, the insert should be modified into single-ended by the user.
- DG..1.0 insert can be mounted into pocket sizes 2 and 3, in which case the pocket width has to be modified.
SKU: DGTR/L Integral Shank Parting and Grooving Tools -
Indexable Tools, TURNING TOOLS, External turning holders
HELIR/L External Holders for Turning, Grooving and Parting
Indexable Tools, TURNING TOOLS, External turning holdersHELIR/L External Holders for Turning, Grooving and Parting
- External Holders for Turning, Grooving and Parting.
- For tool type as shown in Fig.2, CDX for grooving is limited by the part diameter CUTDIA.
- To control the clamping torque, use interchangeable key blades and adjustable torque handles (optional).
SKU: HELIR/L External Holders for Turning, Grooving and Parting -
Indexable Tools, Parting And Grooving Tools, External grooving, Parting off tools
C#-HELIR/L External Tools for Turning, Grooving and Parting with CAMFIX Exchangeable Shanks
Indexable Tools, Parting And Grooving Tools, External grooving, Parting off toolsC#-HELIR/L External Tools for Turning, Grooving and Parting with CAMFIX Exchangeable Shanks
- External Tools for Turning, Grooving and Parting with CAMFIX Exchangeable Shanks.
- The depth of cut (CDX) for grooving is limited by the part diameter CUTDIA.
- To control the clamping torque, use interchangeable key blades and adjustable torque handles (optional).
- Minimum cutting width.
- Maximum cutting width.
- Maximum parting diameter.
SKU: C#-HELIR/L External Tools for Turning, Grooving and Parting with CAMFIX Exchangeable Shanks
There are no reviews yet.