(1) Minimum cutting width
(2) Maximum cutting width
(3) Dmax=43 mm when single-ended insert is used
(4) Dmax=43(1.69″) when single-ended insert is used
* Optional, should be ordered separately
External grooving, Indexable Tools, Parting And Grooving Tools, Parting off tools
DGTR/L Integral Shank Parting and Grooving Tools
Availability:
200 in stock
- Integral shank parting and grooving tools.
- Insert limit is Tmax=18 mm. If deeper penetration is required, the insert should be modified into single-ended by the user.
- DG..1.0 insert can be mounted into pocket sizes 2 and 3, in which case the pocket width has to be modified.
Based on 0 reviews
Be the first to review “DGTR/L Integral Shank Parting and Grooving Tools”
You may also like…
-
Indexable Tools, Parting And Grooving Tools, Grooving Inserts
DGN-WP Double-Sided Parting and Grooving Inserts with a Wiper Design for High Flatness and Surface Finish
Indexable Tools, Parting And Grooving Tools, Grooving InsertsDGN-WP Double-Sided Parting and Grooving Inserts with a Wiper Design for High Flatness and Surface Finish
- Double-Sided Parting and Grooving Inserts with a Wiper Design for High Flatness and Surface Finish.
SKU: DGN-WP Double-Sided Parting and Grooving Inserts with a Wiper Design for High Flatness and Surface Finish -
Indexable Tools, Parting And Grooving Tools, Grooving Inserts
DGN/DGNM-J/JS/JT Double-Sided Inserts for Parting and Grooving Soft Materials, Parting Tubes, Small Diameters and Thin-Walled Parts
Indexable Tools, Parting And Grooving Tools, Grooving InsertsDGN/DGNM-J/JS/JT Double-Sided Inserts for Parting and Grooving Soft Materials, Parting Tubes, Small Diameters and Thin-Walled Parts
- Double-Sided Inserts for Parting and Grooving Soft Materials, Parting Tubes, Small Diameters and Thin-Walled Parts.
- JT chipformer has the basic positive configuration of the J-type and a reinforced negative frontal edge; most suitable for soft materials at low to medium feeds.
SKU: DGN/DGNM-J/JS/JT Double-Sided Inserts for Parting and Grooving Soft Materials, Parting Tubes, Small Diameters and Thin-Walled Parts -
Indexable Tools, Parting And Grooving Tools, Grooving Inserts
DGR-Z/ZS Double-Sided Inserts with Very Positive Rake for Parting Tubes and Thin-Walled and Small Parts
Indexable Tools, Parting And Grooving Tools, Grooving InsertsDGR-Z/ZS Double-Sided Inserts with Very Positive Rake for Parting Tubes and Thin-Walled and Small Parts
- Double-Sided Inserts with Very Positive Rake for Parting Tubes and Thin-Walled and Small Parts.
SKU: DGR-Z/ZS Double-Sided Inserts with Very Positive Rake for Parting Tubes and Thin-Walled and Small Parts -
Indexable Tools, Parting And Grooving Tools, Grooving Inserts
DGN-LF/LFT Double-Sided Inserts for Parting and Grooving Stainless Steel
Indexable Tools, Parting And Grooving Tools, Grooving InsertsDGN-LF/LFT Double-Sided Inserts for Parting and Grooving Stainless Steel
- Double-Sided Inserts for Parting and Grooving Stainless Steel.
- The LFT chipformer features basically the same design as the LF chipformer, except that it is reinforced by a T-land to improve its durability in interrupted-cut or on hard materials applications.
- It can be applied at higher feeds than the LF chipformer.
SKU: DGN-LF/LFT Double-Sided Inserts for Parting and Grooving Stainless Steel
Related products
-
Indexable Tools, Boring and Reaming Tools, Fine boring tools
NBH2084 Micro-Boring Tool Kit
- Each boring head with three different sizes insert holders for different boring ranges.
- Standard insert holder for inserts with lead angle 3°，for a better working performance during bling blind hole boring.
- Insert holder can be mounted in opposite direction to back boring.
- Better connection between insert holder and tool body provides higher tool prigidty and working performance.
- AII DCK-CBH fine boring tools are with internal cooling design,which increases the surface finish and inserts tool life.
SKU: NBH2084 Micro-Boring Tool Kit -
Indexable Tools, Boring and Reaming Tools, Fine boring tools
FM-CBH Large Diameter Boring Tool For Finishing
Indexable Tools, Boring and Reaming Tools, Fine boring toolsFM-CBH Large Diameter Boring Tool For Finishing
- Each boring head with three different sizes insert holders for different boring ranges.
- Standard insert holder for inserts with lead angle 3°，for a better working performance during bling blind hole boring.
- Insert holder can be mounted in opposite direction to back boring.
- Better connection between insert holder and tool body provides higher tool prigidty and working performance.
- AII DCK-CBH fine boring tools are with internal cooling design,which increases the surface finish and inserts tool life.
SKU: CBH Large Diameter Boring Tool For Finishing -
Indexable Tools, Boring and Reaming Tools, Fine boring tools
DBJ12 Micro-boring Bar
- Adjustment Precision 0.002 mm on Diameter.
- One Boring Body With Ineert Holder or Boring Bar Can Be For Boing And Back Boring.
- Standaed insert HoIder For Inserts With lead Angle 3°，For a Better Working Performance During Blind Hole Boring.
- The extensive Area Serrated With connection Between insert Holder And Tool Body Provides Higer Tool Rigity And Working Performance.
SKU: DBJ12 Micro-boring Bar -
Indexable Tools, Boring and Reaming Tools, Fine boring tools
CBH Finish Borng Tool
1.Each boring head with three different sizes insert holders for different boring ranges.
2.Standard insert holder for inserts with lead angle 3°，for a better working performance during bling blind hole boring.
3.Insert holder can be mounted in opposite direction to back boring.
4.Better connection between insert holder and tool body provides higher tool prigidty and working performance.
5.AII DCK-CBH fine boring tools are with internal cooling design,which increases the surface finish and inserts tool lifeSKU: CBH Finish Borng Tool
There are no reviews yet.