(1) Cutting width tolerance (+/-)
(2) Corner radius tolerance (+/-)
(3) Cutting depth maximum
(4) No depth limit
Grooving Inserts, Indexable Tools, Parting And Grooving Tools
DGN-UT/UA Double-Sided Inserts for Parting and Grooving Cr-Ni Alloys, Low Carbon Steel and Ductile Materials at Low Feeds
Availability:
200 in stock
- Double-Sided Inserts for Parting and Grooving Cr-Ni Alloys, Low Carbon Steel and Ductile Materials at Low Feeds.
Brands | |
---|---|
Units of length | |
Workpiece Material | Aluminium (N), Hardened Steel (H), Heat-resistant Alloy and Titanium Alloy (S), Stainless Steel (M), Steel (P) |
Based on 0 reviews
Be the first to review “DGN-UT/UA Double-Sided Inserts for Parting and Grooving Cr-Ni Alloys, Low Carbon Steel and Ductile Materials at Low Feeds”
You may also like…
-
Indexable Tools, Parting And Grooving Tools, External grooving, Parting off tools
DGFHR/L-B-D..(R/L) Reinforced Type Blades with Screw Clamping
Indexable Tools, Parting And Grooving Tools, External grooving, Parting off toolsDGFHR/L-B-D..(R/L) Reinforced Type Blades with Screw Clamping
- Reinforced Type Blades with Screw Clamping.
- Insert (double sided) limit is CDX=18 mm, If deeper penetration is required the insert should be changed to a single-ended insert DGNM type.
- DG..1.0 insert can be mounted into pocket sizes 2 and 3, in which case the pocket width has to be modified.
SKU: DGFHR/L-B-D..(R/L) Reinforced Type Blades with Screw Clamping -
Indexable Tools, Parting And Grooving Tools, External grooving, Parting off tools
DGFH-JHP Parting and Grooving Blades with Channels for Low and High Pressure Coolant Carrying DO-GRIP Inserts
Indexable Tools, Parting And Grooving Tools, External grooving, Parting off toolsDGFH-JHP Parting and Grooving Blades with Channels for Low and High Pressure Coolant Carrying DO-GRIP Inserts
- Parting and Grooving Blades with Channels for Low and High Pressure Coolant Carrying DO-GRIP Inserts.
SKU: DGFH-JHP Parting and Grooving Blades with Channels for Low and High Pressure Coolant Carrying DO-GRIP Inserts -
Indexable Tools, Parting And Grooving Tools, External grooving, Parting off tools
DGTR/L Integral Shank Parting and Grooving Tools
Indexable Tools, Parting And Grooving Tools, External grooving, Parting off toolsDGTR/L Integral Shank Parting and Grooving Tools
- Integral shank parting and grooving tools.
- Insert limit is Tmax=18 mm. If deeper penetration is required, the insert should be modified into single-ended by the user.
- DG..1.0 insert can be mounted into pocket sizes 2 and 3, in which case the pocket width has to be modified.
SKU: DGTR/L Integral Shank Parting and Grooving Tools
There are no reviews yet.