(1) Sharp corners
(2) Single-ended insert
(3) Cutting width tolerance (+/-)
(4) Corner radius tolerance (+/-)
(5) Cutting depth maximum
(6) No depth limit
Grooving Inserts, Indexable Tools, Parting And Grooving Tools
DGN/DGNM-J/JS/JT Double-Sided Inserts for Parting and Grooving Soft Materials, Parting Tubes, Small Diameters and Thin-Walled Parts
Availability:
200 in stock
- Double-Sided Inserts for Parting and Grooving Soft Materials, Parting Tubes, Small Diameters and Thin-Walled Parts.
- JT chipformer has the basic positive configuration of the J-type and a reinforced negative frontal edge; most suitable for soft materials at low to medium feeds.
Brands | |
---|---|
Units of length | |
Workpiece Material | Aluminium (N), Cast Iron (K), Hardened Steel (H), Heat-resistant Alloy and Titanium Alloy (S), Stainless Steel (M), Steel (P) |
Based on 0 reviews
Be the first to review “DGN/DGNM-J/JS/JT Double-Sided Inserts for Parting and Grooving Soft Materials, Parting Tubes, Small Diameters and Thin-Walled Parts”
You may also like…
-
Indexable Tools, Parting And Grooving Tools, Face grooving
HFPAD-5 Adapters for Face Machining
- Adapters for Face Machining.
- WF(assembly)=WF(shank) + WF(adapter).
- DGN & GRIP 5.. inserts can be used only with right-hand adapters, HGPL 5..inserts with left-hand adapters.
SKU: HFPAD-5 Adapters for Face Machining -
Indexable Tools, Parting And Grooving Tools, External grooving, Parting off tools
DGFHR/L-B-D..(R/L) Reinforced Type Blades with Screw Clamping
Indexable Tools, Parting And Grooving Tools, External grooving, Parting off toolsDGFHR/L-B-D..(R/L) Reinforced Type Blades with Screw Clamping
- Reinforced Type Blades with Screw Clamping.
- Insert (double sided) limit is CDX=18 mm, If deeper penetration is required the insert should be changed to a single-ended insert DGNM type.
- DG..1.0 insert can be mounted into pocket sizes 2 and 3, in which case the pocket width has to be modified.
SKU: DGFHR/L-B-D..(R/L) Reinforced Type Blades with Screw Clamping -
Indexable Tools, Parting And Grooving Tools, External grooving, Parting off tools
DGAD-B-D Parting and Grooving Screw- Clamped Adapters for DO-GRIP Double-Ended Inserts
Indexable Tools, Parting And Grooving Tools, External grooving, Parting off toolsDGAD-B-D Parting and Grooving Screw- Clamped Adapters for DO-GRIP Double-Ended Inserts
- Parting and Grooving Screw-Clamped Adapters for DO-GRIP Double-Ended Inserts.
- Up to 3 mm depth, without any limitation on the diameter.
- DG..1.0 insert can also be mounted into pocket sizes 2 and 3, in which case the pocket width has to be modified.
SKU: DGAD-B-D Parting and Grooving Screw- Clamped Adapters for DO-GRIP Double-Ended Inserts -
Indexable Tools, Parting And Grooving Tools, External grooving, Parting off tools
DGFHR/L Parting and Grooving Reinforced Blades for DO-GRIP Inserts
Indexable Tools, Parting And Grooving Tools, External grooving, Parting off toolsDGFHR/L Parting and Grooving Reinforced Blades for DO-GRIP Inserts
- Parting and Grooving Reinforced Blades for DO-GRIP Inserts.
- Insert limit is Tmax=18 mm. If deeper penetration is required, the insert should be modified into single-ended by the user.
- DG..1.0 insert can be mounted into pocket sizes 2 and 3. In which case the pocket width has to be modified.
SKU: DGFHR/L Parting and Grooving Reinforced Blades for DO-GRIP Inserts
There are no reviews yet.