(1) Do not use DG.. 1.4 on this tool!
(2) Minimum cutting width
(3) Maximum cutting width
External grooving, Indexable Tools, Parting And Grooving Tools, Parting off tools
DGAD-B-D Parting and Grooving Screw- Clamped Adapters for DO-GRIP Double-Ended Inserts
Availability:
200 in stock
- Parting and Grooving Screw-Clamped Adapters for DO-GRIP Double-Ended Inserts.
- Up to 3 mm depth, without any limitation on the diameter.
- DG..1.0 insert can also be mounted into pocket sizes 2 and 3, in which case the pocket width has to be modified.
Based on 0 reviews
Be the first to review “DGAD-B-D Parting and Grooving Screw- Clamped Adapters for DO-GRIP Double-Ended Inserts”
You may also like…
-
Indexable Tools, Parting And Grooving Tools, Grooving Inserts
DGN-UT/UA Double-Sided Inserts for Parting and Grooving Cr-Ni Alloys, Low Carbon Steel and Ductile Materials at Low Feeds
Indexable Tools, Parting And Grooving Tools, Grooving InsertsDGN-UT/UA Double-Sided Inserts for Parting and Grooving Cr-Ni Alloys, Low Carbon Steel and Ductile Materials at Low Feeds
- Double-Sided Inserts for Parting and Grooving Cr-Ni Alloys, Low Carbon Steel and Ductile Materials at Low Feeds.
SKU: DGN-UT/UA Double-Sided Inserts for Parting and Grooving Cr-Ni Alloys, Low Carbon Steel and Ductile Materials at Low Feeds -
Indexable Tools, Parting And Grooving Tools, Grooving Inserts
DGR-Z/ZS Double-Sided Inserts with Very Positive Rake for Parting Tubes and Thin-Walled and Small Parts
Indexable Tools, Parting And Grooving Tools, Grooving InsertsDGR-Z/ZS Double-Sided Inserts with Very Positive Rake for Parting Tubes and Thin-Walled and Small Parts
- Double-Sided Inserts with Very Positive Rake for Parting Tubes and Thin-Walled and Small Parts.
SKU: DGR-Z/ZS Double-Sided Inserts with Very Positive Rake for Parting Tubes and Thin-Walled and Small Parts -
Indexable Tools, Parting And Grooving Tools, Grooving Inserts
DGN-LF/LFT Double-Sided Inserts for Parting and Grooving Stainless Steel
Indexable Tools, Parting And Grooving Tools, Grooving InsertsDGN-LF/LFT Double-Sided Inserts for Parting and Grooving Stainless Steel
- Double-Sided Inserts for Parting and Grooving Stainless Steel.
- The LFT chipformer features basically the same design as the LF chipformer, except that it is reinforced by a T-land to improve its durability in interrupted-cut or on hard materials applications.
- It can be applied at higher feeds than the LF chipformer.
SKU: DGN-LF/LFT Double-Sided Inserts for Parting and Grooving Stainless Steel -
Indexable Tools, Parting And Grooving Tools, Grooving Inserts
DGR-P Double-Sided Inserts for Parting Soft Materials, Thin and Miniature Parts
Indexable Tools, Parting And Grooving Tools, Grooving InsertsDGR-P Double-Sided Inserts for Parting Soft Materials, Thin and Miniature Parts
- Double-Sided Inserts for Parting Soft Materials, Thin and Miniature Parts.
SKU: DGR-P Double-Sided Inserts for Parting Soft Materials, Thin and Miniature Parts
Related products
-
Indexable Tools, Boring and Reaming Tools, Fine boring tools
DBJ10 Micro-boring Bar
- Adjustment Precision 0.002 mm on Diameter.
- One Boring Body With Ineert Holder or Boring Bar Can Be For Boing And Back Boring.
- Standaed insert HoIder For Inserts With lead Angle 3°，For a Better Working Performance During Blind Hole Boring.
- The extensive Area Serrated With connection Between insert Holder And Tool Body Provides Higer Tool Rigity And Working Performance.
SKU: DBJ10 Micro-boring Bar -
Indexable Tools, Boring and Reaming Tools, Fine boring tools
FM-CBH Large Diameter Boring Tool For Finishing
Indexable Tools, Boring and Reaming Tools, Fine boring toolsFM-CBH Large Diameter Boring Tool For Finishing
- Each boring head with three different sizes insert holders for different boring ranges.
- Standard insert holder for inserts with lead angle 3°，for a better working performance during bling blind hole boring.
- Insert holder can be mounted in opposite direction to back boring.
- Better connection between insert holder and tool body provides higher tool prigidty and working performance.
- AII DCK-CBH fine boring tools are with internal cooling design,which increases the surface finish and inserts tool life.
SKU: CBH Large Diameter Boring Tool For Finishing -
Indexable Tools, Boring and Reaming Tools, Fine boring tools
FBH Micro-boring Head
- Adjustment precision 0.002 mm diameter.
- One boring body with insert hoder or boring bar can be for boring and back boring.
- Standard insert holder for inserts with lead 3°，for a better working performance during bling hole boring.
- The extensive area serrated with connection between insert holder and tool body provides higher tool rigidity and working performance.
- All DCK-FBH fine boring tools are with intemal cooling design,which increases the surface finish and inserts tool life.
SKU: FBH Micro-boring Head -
Indexable Tools, Boring and Reaming Tools, Fine boring tools
FBH Micro-borng TooI
- Adjustment precision 0.002 mm diameter.
- One boring body with insert hoder or boring bar can be for boring and back boring.
- Standard insert holder for inserts with lead 3°，for a better working performance during bling hole boring.
- The extensive area serrated with connection between insert holder and tool body provides higher tool rigidity and working performance.
- All DCK-FBH fine boring tools are with intemal cooling design,which increases the surface finish and inserts tool life.
SKU: FBH Micro-borng TooI
There are no reviews yet.