(1) Inserts with coolant holes, recommended coolant pressure 10 bar minimum
(2) Single-ended insert.
(3) Cutting width tolerance (+/-)
(4) Corner radius tolerance (+/-)
(5) Cutting depth maximum
(6) No depth limit
Grooving Inserts, Indexable Tools, Parting And Grooving Tools
DGN/DGNC/DGNM-C Double-Sided Parting Inserts for Parting and Grooving Bars, Hard Materials and Tough Applications
Availability:
200 in stock
- Double-Sided Parting Inserts for Parting and Grooving Bars, Hard Materials and Tough Applications.
- The feed values for grade IC20 should be decreased by 50%.
Brands | |
---|---|
Units of length | |
Workpiece Material | Aluminium (N), Cast Iron (K), Hardened Steel (H), Heat-resistant Alloy and Titanium Alloy (S), Stainless Steel (M), Steel (P) |
Based on 0 reviews
Be the first to review “DGN/DGNC/DGNM-C Double-Sided Parting Inserts for Parting and Grooving Bars, Hard Materials and Tough Applications”
You may also like…
-
Indexable Tools, Parting And Grooving Tools, Face grooving
HFAER/L-5T, 6T Adapters for External Facing Along Shafts
Indexable Tools, Parting And Grooving Tools, Face groovingHFAER/L-5T, 6T Adapters for External Facing Along Shafts
- Adapters for External Facing Along Shafts.
- After initial groove, no limitation to widening groove outward from or toward center.
- Adapters can be mounted on standard HAR/L, HAPR/L, HAI holders for external machining.
- DGN & GRIP inserts can be used only with right-hand adapters, HGPL inserts with left-hand blades.
SKU: HFAER/L-5T, 6T Adapters for External Facing Along Shafts -
Indexable Tools, Parting And Grooving Tools, Face grooving
HFHR/L-4T Integral Holders for Facing, DAXN. 25 mm
Indexable Tools, Parting And Grooving Tools, Face groovingHFHR/L-4T Integral Holders for Facing, DAXN. 25 mm
- Integral Holders for Facing, Dmin. 25 mm.
- DGN & GRIP 4 mm inserts can be used only with right-hand tools, HGPL 4 mm with left-hand tools.
SKU: HFHR/L-4T Integral Holders for Facing, DAXN. 25 mm -
Indexable Tools, Parting And Grooving Tools, External grooving, Parting off tools
DGTR/L-B/BC-D Integral Shank Reinforced Parting and Grooving Tools Especially for DGNC Type of Inserts
Indexable Tools, Parting And Grooving Tools, External grooving, Parting off toolsDGTR/L-B/BC-D Integral Shank Reinforced Parting and Grooving Tools Especially for DGNC Type of Inserts
- Integral Shank Reinforced Parting and Grooving Tools Espesially for DGNC Type of Inserts.
- Important: 1.4 mm width inserts should be used only on tools for 1.4 mm specific width tools.
- DGN/R/L 1 mm inserts can also be mounted into pocket sizes 2 and 3.
SKU: DGTR/L-B/BC-D Integral Shank Reinforced Parting and Grooving Tools Especially for DGNC Type of Inserts
There are no reviews yet.