Face grooving, Indexable Tools, Parting And Grooving Tools
HFAER/L-5T, 6T Adapters for External Facing Along Shafts
- Adapters for External Facing Along Shafts.
- After initial groove, no limitation to widening groove outward from or toward center.
- Adapters can be mounted on standard HAR/L, HAPR/L, HAI holders for external machining.
- DGN & GRIP inserts can be used only with right-hand adapters, HGPL inserts with left-hand blades.
Availability:
200 in stock
(1) Minimum penetration diameter
(2) Maximum penetration diameter
* Optional, should be ordered separately
| Brands | |
|---|---|
| Units of length |
Based on 0 reviews
Be the first to review “HFAER/L-5T, 6T Adapters for External Facing Along Shafts”
You may also like…
-
Indexable Tools, Parting And Grooving Tools, Face grooving, Internal grooving
C#-HAD Holders with CAMFIX Exchangeable Tapered Shanks for Internal Facing Adapters
Indexable Tools, Parting And Grooving Tools, Face grooving, Internal groovingC#-HAD Holders with CAMFIX Exchangeable Tapered Shanks for Internal Facing Adapters
- Holders with CAMFIX Exchangeable Tapered Shanks for Internal Facing Adapters.
SKU: C#-HAD Holders with CAMFIX Exchangeable Tapered Shanks for Internal Facing Adapters -
Grooving Inserts, Indexable Tools, Parting And Grooving Tools
DGN/DGNC/DGNM-C Double-Sided Parting Inserts for Parting and Grooving Bars, Hard Materials and Tough Applications
Grooving Inserts, Indexable Tools, Parting And Grooving ToolsDGN/DGNC/DGNM-C Double-Sided Parting Inserts for Parting and Grooving Bars, Hard Materials and Tough Applications
- Double-Sided Parting Inserts for Parting and Grooving Bars, Hard Materials and Tough Applications.
- The feed values for grade IC20 should be decreased by 50%.
SKU: DGN/DGNC/DGNM-C Double-Sided Parting Inserts for Parting and Grooving Bars, Hard Materials and Tough Applications -
Grooving Inserts, Indexable Tools, Parting And Grooving Tools
DGN/DGNM-J/JS/JT Double-Sided Inserts for Parting and Grooving Soft Materials, Parting Tubes, Small Diameters and Thin-Walled Parts
Grooving Inserts, Indexable Tools, Parting And Grooving ToolsDGN/DGNM-J/JS/JT Double-Sided Inserts for Parting and Grooving Soft Materials, Parting Tubes, Small Diameters and Thin-Walled Parts
- Double-Sided Inserts for Parting and Grooving Soft Materials, Parting Tubes, Small Diameters and Thin-Walled Parts.
- JT chipformer has the basic positive configuration of the J-type and a reinforced negative frontal edge; most suitable for soft materials at low to medium feeds.
SKU: DGN/DGNM-J/JS/JT Double-Sided Inserts for Parting and Grooving Soft Materials, Parting Tubes, Small Diameters and Thin-Walled Parts
Related products
-
Indexable Tools, Boring and Reaming Tools, Fine boring tools
FBH Micro-boring Head
- Adjustment precision 0.002 mm diameter.
- One boring body with insert hoder or boring bar can be for boring and back boring.
- Standard insert holder for inserts with lead 3°，for a better working performance during bling hole boring.
- The extensive area serrated with connection between insert holder and tool body provides higher tool rigidity and working performance.
- All DCK-FBH fine boring tools are with intemal cooling design,which increases the surface finish and inserts tool life.
SKU: FBH Micro-boring Head -
Indexable Tools, Boring and Reaming Tools, Fine boring tools
CBH-M Boring Tool For Pin Turning
- Each boring head with three different sizes insert holders for different boring ranges.
- Standard insert holder for inserts with lead angle 3°，for a better working performance during bling blind hole boring.
- Insert holder can be mounted in opposite direction to back boring.
- Better connection between insert holder and tool body provides higher tool prigidty and working performance.
- AII DCK-CBH fine boring tools are with internal cooling design,which increases the surface finish and inserts tool life.
SKU: CBH-M Boring Tool For Pin Turning -
Indexable Tools, Boring and Reaming Tools, Fine boring tools
DBJ10/12/16 Micro-boring head
- Each boring head with three different sizes insert holders for different boring ranges.
- Standard insert holder for inserts with lead angle 3°，for a better working performance during bling blind hole boring.
- Insert holder can be mounted in opposite direction to back boring.
- Better connection between insert holder and tool body provides higher tool prigidty and working performance.
- AII DCK-CBH fine boring tools are with internal cooling design,which increases the surface finish and inserts tool life.
SKU: DBJ10/12/16 Micro-boring head -
Indexable Tools, Boring and Reaming Tools, Fine boring tools
FBH Micro-borng TooI
- Adjustment precision 0.002 mm diameter.
- One boring body with insert hoder or boring bar can be for boring and back boring.
- Standard insert holder for inserts with lead 3°，for a better working performance during bling hole boring.
- The extensive area serrated with connection between insert holder and tool body provides higher tool rigidity and working performance.
- All DCK-FBH fine boring tools are with intemal cooling design,which increases the surface finish and inserts tool life.
SKU: FBH Micro-borng TooI
There are no reviews yet.