• Hole tolerance: D+0.05 in average conditions. However, it can be higher or lower according to machine and tooling conditions • Do not mount smaller drilling heads other than the specified range of the drill body.
(1) Pre-thread hole diameter
(2) Used for standard thread size
(3) Cutting diameter minimum
(4) Cutting diameter maximum
(5) Pocket size
Drilling Tools, Exchangeable head drills, Indexable Tools
DCNT (M8-M24) Indexable Head Drills with Chamfering Inserts Mainly for Pre-Thread Holes
Availability:
200 in stock
- Indexable Head Drills with Chamfering Inserts Mainly for Pre-Thread Holes.
- SUMOCHAM Pre-Thread Hole Drills.
- Suitable for through hole or blind hole with 45° chamfer.
- Metric range: M8-M24.
- Inch range: 3/8-7/8.
Based on 0 reviews
Be the first to review “DCNT (M8-M24) Indexable Head Drills with Chamfering Inserts Mainly for Pre-Thread Holes”
You may also like…
-
Indexable Tools, Drilling Tools, Exchangeable head drills
ICK Exchangeable DCN Drill Heads
- Exchangeable DCN Drill Heads, for Cast Iron (ISO K Materials).
- ICK geometry was designed for extremely high feed rates, while maintaining long tool life on the ISO K materials group.
SKU: ICK Exchangeable DCN Drill Heads -
Indexable Tools, Drilling Tools, Exchangeable head drills
HCP-IQ Exchangeable DCN Drill Self-Centering Heads for Alloy Steel and Cast Iron
Indexable Tools, Drilling Tools, Exchangeable head drillsHCP-IQ Exchangeable DCN Drill Self-Centering Heads for Alloy Steel and Cast Iron
- Exchangeable DCN Drill Self-Centering Heads for Alloy Steel and Cast Iron.
- The HCP drilling heads enable drilling with 12xD drills without the need for pre-hole preparation.
- The drills can be used in clad plates. The 12 L/D ratio drills are commonly used in the heat exchanger and other industries.
- HCP geometry is designed with concave cutting edges, this substantially enhances the self-centering capability of the drill, which enables using long drills (up to 12XD), without a pilot hole operation.
SKU: HCP-IQ Exchangeable DCN Drill Self-Centering Heads for Alloy Steel and Cast Iron -
Indexable Tools, Drilling Tools, Exchangeable head drills
ICK-2M Double Margin Drilling Heads for DCN Drills for High Surface Finish
Indexable Tools, Drilling Tools, Exchangeable head drillsICK-2M Double Margin Drilling Heads for DCN Drills for High Surface Finish
- Double Margin Drilling Heads for DCN Drills for Machining Cast Iron with High Surface Finish Results.
- ICK geometry was designed for extremely high feed rates, while maintaining long tool life on the ISO K materials group.
SKU: ICK-2M Double Margin Drilling Heads for DCN Drills for High Surface Finish
There are no reviews yet.