• ICK for use on cast iron (ISO K). The drill head is produced with a ground chamfer and a honed cutting edge.
• Can provide high surface finish of up to 1.6 Ra; hole cylindricity and straightness of up to 0.05 mm.
• Ordering example for the ICP 13.3 mm drilling head: ICP 133-2M IC908.
(1) Drilling heads are available in increments of 0.1 mm
(2) Seat size code
Drilling Tools, Exchangeable head drills, Indexable Tools
ICK-2M Double Margin Drilling Heads for DCN Drills for High Surface Finish
Availability:
200 in stock
- Double Margin Drilling Heads for DCN Drills for Machining Cast Iron with High Surface Finish Results.
- ICK geometry was designed for extremely high feed rates, while maintaining long tool life on the ISO K materials group.
Brands | |
---|---|
Units of length | |
Workpiece Material | Hardened Steel (H), Heat-resistant Alloy and Titanium Alloy (S), Stainless Steel (M), Steel (P) |
Based on 0 reviews
Be the first to review “ICK-2M Double Margin Drilling Heads for DCN Drills for High Surface Finish”
You may also like…
-
Indexable Tools, Drilling Tools, Indexable insert drills
DCN A-8D Indexable Head Drills with Coolant Holes and One Flat Shank, Drilling Depth 8xD
Indexable Tools, Drilling Tools, Indexable insert drillsDCN A-8D Indexable Head Drills with Coolant Holes and One Flat Shank, Drilling Depth 8xD
- Indexable Head Drills with Coolant Holes and One Flat Shank, Drilling Depth 8xD.
- Parallel flat shank (ISO 9766) dedicated for side lock adaptation system, with the letter A in its designation.
- Full round shank suitable for hydraulic and collet adapters, providing improved runout of the cutting edge, which is most popular for drilling operations with L/D>8 ratio.
- This shank has the letter R in its designation.
SKU: DCN A-8D Indexable Head Drills with Coolant Holes and One Flat Shank, Drilling Depth 8xD -
Indexable Tools, Drilling Tools, Indexable insert drills
DCN C-5D Indexable Head Drills with Coolant Holes and Cylindrical Shanks, Drilling Depth 5xD
Indexable Tools, Drilling Tools, Indexable insert drillsDCN C-5D Indexable Head Drills with Coolant Holes and Cylindrical Shanks, Drilling Depth 5xD
- Indexable Head Drills with Coolant Holes and Cylindrical Shanks, Drilling Depth 5xD.
- The drill bodies are available in 3xD and 5xD length to diameter ratios.
- The inserts are supplied in a specifically developed user-friendly key, enabling easy mounting with no setup time.
SKU: DCN C-5D Indexable Head Drills with Coolant Holes and Cylindrical Shanks, Drilling Depth 5xD -
Indexable Tools, Drilling Tools, Indexable insert drills
DCN A-3D Indexable Head Drills with Coolant Holes and One Flat Shank, Drilling Depth 3xD
Indexable Tools, Drilling Tools, Indexable insert drillsDCN A-3D Indexable Head Drills with Coolant Holes and One Flat Shank, Drilling Depth 3xD
- Indexable Head Drills with Coolant Holes and One Flat Shank, Drilling Depth 3xD.
- Parallel flat shank (ISO 9766) dedicated for side lock adaptation system, with the letter A in its designation.
- Full round shank suitable for hydraulic and collet adapters, providing improved runout of the cutting edge, which is most popular for drilling operations with L/D>8 ratio.
- This shank has the letter R in its designation.
SKU: DCN A-3D Indexable Head Drills with Coolant Holes and One Flat Shank, Drilling Depth 3xD -
Indexable Tools, Drilling Tools, Exchangeable head drills
DCNT (M8-M24) Indexable Head Drills with Chamfering Inserts Mainly for Pre-Thread Holes
Indexable Tools, Drilling Tools, Exchangeable head drillsDCNT (M8-M24) Indexable Head Drills with Chamfering Inserts Mainly for Pre-Thread Holes
- Indexable Head Drills with Chamfering Inserts Mainly for Pre-Thread Holes.
- SUMOCHAM Pre-Thread Hole Drills.
- Suitable for through hole or blind hole with 45° chamfer.
- Metric range: M8-M24.
- Inch range: 3/8-7/8.
SKU: DCNT (M8-M24) Indexable Head Drills with Chamfering Inserts Mainly for Pre-Thread Holes
There are no reviews yet.