• Prior to using the 12xD drill, it is recommended to drill a pre-hole by using a DCN 1.5xD drill or a centering drill. The HCP drilling head may eliminate the need for a pre-hole.
(1) Cutting diameter minimum • Do not mount smaller drilling heads other than the specified range of the drill body.
(2) Cutting diameter maximum
(3) Seat size code
Drilling Tools, Indexable insert drills, Indexable Tools
DCN R-12D Indexable Head Drills with Coolant Holes and a Cylindrical Shank, Drilling Depth 12xD
Availability:
200 in stock
- Indexable Head Drills with Coolant Holes and a Cylindrical Shank, Drilling Depth 12xD.
- Parallel flat shank (ISO 9766) dedicated for side lock adaptation system, with the letter A in its designation.
- Full round shank suitable for hydraulic and collet adapters, providing improved runout of the cutting edge, which is most popular for drilling operations with L/D>8 ratio.
- This shank has the letter R in its designation.
Based on 0 reviews
Be the first to review “DCN R-12D Indexable Head Drills with Coolant Holes and a Cylindrical Shank, Drilling Depth 12xD”
You may also like…
-
Indexable Tools, Drilling Tools, Exchangeable head drills
FCP Exchangeable Flat Bottom DCN Drill Heads for Steel and Cast Iron (ISO P and ISO K Materials)
Indexable Tools, Drilling Tools, Exchangeable head drillsFCP Exchangeable Flat Bottom DCN Drill Heads for Steel and Cast Iron (ISO P and ISO K Materials)
- Exchangeable Flat Bottom DCN Drill Heads for Steel and Cast Iron (ISO P and ISO K Materials).
- FCP geometry provides a nearly flat bottom in the hole, which is required in a variety of applications.
SKU: FCP Exchangeable Flat Bottom DCN Drill Heads for Steel and Cast Iron (ISO P and ISO K Materials -
Indexable Tools, Drilling Tools, Exchangeable head drills
ICK-2M Double Margin Drilling Heads for DCN Drills for High Surface Finish
Indexable Tools, Drilling Tools, Exchangeable head drillsICK-2M Double Margin Drilling Heads for DCN Drills for High Surface Finish
- Double Margin Drilling Heads for DCN Drills for Machining Cast Iron with High Surface Finish Results.
- ICK geometry was designed for extremely high feed rates, while maintaining long tool life on the ISO K materials group.
SKU: ICK-2M Double Margin Drilling Heads for DCN Drills for High Surface Finish -
Indexable Tools, Drilling Tools, Exchangeable head drills
ICK Exchangeable DCN Drill Heads
- Exchangeable DCN Drill Heads, for Cast Iron (ISO K Materials).
- ICK geometry was designed for extremely high feed rates, while maintaining long tool life on the ISO K materials group.
SKU: ICK Exchangeable DCN Drill Heads -
Indexable Tools, Drilling Tools, Exchangeable head drills
HCP-IQ Exchangeable DCN Drill Self-Centering Heads for Alloy Steel and Cast Iron
Indexable Tools, Drilling Tools, Exchangeable head drillsHCP-IQ Exchangeable DCN Drill Self-Centering Heads for Alloy Steel and Cast Iron
- Exchangeable DCN Drill Self-Centering Heads for Alloy Steel and Cast Iron.
- The HCP drilling heads enable drilling with 12xD drills without the need for pre-hole preparation.
- The drills can be used in clad plates. The 12 L/D ratio drills are commonly used in the heat exchanger and other industries.
- HCP geometry is designed with concave cutting edges, this substantially enhances the self-centering capability of the drill, which enables using long drills (up to 12XD), without a pilot hole operation.
SKU: HCP-IQ Exchangeable DCN Drill Self-Centering Heads for Alloy Steel and Cast Iron
There are no reviews yet.