Refer to machine manual before mounting Camfix Cooling Tube.
Check that clamping drawbar has O-ring inside.
Apply Loctite 542 (or equivalent) on coolant tube thread to secure/seal the thread.
Mount cooling tube (ONLY) by using Cooling Tube C# wrench with “mount” side.
Accessories for Toolholder, Tool Holders
COOLING TUBE C# Cooling Tubes for CAMFIX (ISO 26623-1) Shanks
Availability:
200 in stock
- Cooling Tubes for CAMFIX (ISO 26623-1) Shanks.
Based on 0 reviews
Be the first to review “COOLING TUBE C# Cooling Tubes for CAMFIX (ISO 26623-1) Shanks”
Related products
-
Clamping Technology, Tool Holders, Slotting Cutter Adapters, DIN 69893 HSK-A, HSK-E, HSK-F
Soltting Cutter Holders
Clamping Technology, Tool Holders, Slotting Cutter Adapters, DIN 69893 HSK-A, HSK-E, HSK-FSoltting Cutter Holders
- Tool holding device: HSK 63A-100A.
- Bore holes for data carriers according to DIN 69893.
- Fine balanced at G 2.5 at 25,000 rpm.
- High runout accuracy (< 0.003 mm).
- Highest rigidity.
- Highest clamping forces.
SKU: Soltting Cutter Holders -
Clamping Technology, Tool Holders, Slotting Cutter Adapters, JIS (MAS 403) BT30/BT40/BT50
BT 2° Side Lock Holders
Clamping Technology, Tool Holders, Slotting Cutter Adapters, JIS (MAS 403) BT30/BT40/BT50BT 2° Side Lock Holders
- Tool holding device: BT30-50.
- Bore holes for data carriers according to JIS B6339.
- Run-out accuracy ≤ 0.003 mm measured from taper
to D1. - Balancing grade G2.5 at 25,000 RPM or Umax < 1 gmm.
SKU: BT 2° Side Lock Holders -
Clamping Technology, Tool Holders, Collet Chucks, JIS (MAS 403) BT30/BT40/BT50
BT30 ER Collet Chucks
- Tool holding device: BT30.
- Bore holes for data carriers according to JIS B6339.
- Fine balanced at G 2.5 at 25,000 rpm.
- High runout accuracy (< 0.003 mm).
- Highest rigidity.
- Highest clamping forces.
SKU: BT30 ER Collet Chucks
There are no reviews yet.