Indexable Tools, Parting And Grooving Tools, Tool Blocks
C#-TBK-R/L Blocks with CAMFIX Exchangeable Shanks for Parting and Grooving Blades
- Blocks with CAMFIX Exchangeable Shanks for Parting and Grooving Blades.
Availability:
200 in stock
| Brands | |
|---|---|
| Units of length |
Based on 0 reviews
Be the first to review “C#-TBK-R/L Blocks with CAMFIX Exchangeable Shanks for Parting and Grooving Blades”
You may also like…
-
Indexable Tools, Parting And Grooving Tools, External grooving, Parting off tools
CGHN-DG Double-Ended Blades for External Grooving and Turning Self-Clamped Inserts
Indexable Tools, Parting And Grooving Tools, External grooving, Parting off toolsCGHN-DG Double-Ended Blades for External Grooving and Turning Self-Clamped Inserts
- Double-Ended Blades for External Grooving and Turning Self-Clamped Inserts.
-
DO-GRIP clamping insert is self-retained for long overhang.
-
When using TIP inserts, toolholder seat needs to be modified according to insert profile to ensure clearance.
-
When using a double-ended insert, grooving depth is limited by the insert.
SKU: CGHN-DG Double-Ended Blades for External Grooving and Turning Self-Clamped Inserts -
Indexable Tools, Parting And Grooving Tools, External grooving, Parting off tools
DGFHR/L-B-D..(R/L) Reinforced Type Blades with Screw Clamping
Indexable Tools, Parting And Grooving Tools, External grooving, Parting off toolsDGFHR/L-B-D..(R/L) Reinforced Type Blades with Screw Clamping
- Reinforced Type Blades with Screw Clamping.
- Insert (double sided) limit is CDX=18 mm, If deeper penetration is required the insert should be changed to a single-ended insert DGNM type.
- DG..1.0 insert can be mounted into pocket sizes 2 and 3, in which case the pocket width has to be modified.
SKU: DGFHR/L-B-D..(R/L) Reinforced Type Blades with Screw Clamping -
Indexable Tools, Parting And Grooving Tools, External grooving, Face grooving, Parting off tools
PCHBR/L Double-Ended Parting and Grooving Blades for PENTACUT Inserts
Indexable Tools, Parting And Grooving Tools, External grooving, Face grooving, Parting off toolsPCHBR/L Double-Ended Parting and Grooving Blades for PENTACUT Inserts
- Double-Ended Parting and Grooving Blades for PENTACUT Inserts.
SKU: PCHBR/L Double-Ended Parting and Grooving Blades for PENTACUT Inserts
Related products
-
-
Indexable Tools, Boring and Reaming Tools, Fine boring tools
CBH-L Boring Tool For Pin Turning （Large Diameter)
Indexable Tools, Boring and Reaming Tools, Fine boring toolsCBH-L Boring Tool For Pin Turning （Large Diameter)
- Each boring head with three different sizes insert holders for different boring ranges.
- Standard insert holder for inserts with lead angle 3°，for a better working performance during bling blind hole boring.
- Insert holder can be mounted in opposite direction to back boring.
- Better connection between insert holder and tool body provides higher tool prigidty and working performance.
- AII DCK-CBH fine boring tools are with internal cooling design,which increases the surface finish and inserts tool life.
SKU: CBH-L Boring Tool For Pin Turning （Large Diameter) -
Indexable Tools, Boring and Reaming Tools, Fine boring tools
FBH63P Micro-Flnishing Boring Kit
- Adjustment Precision 0.002 mm on Diameter
- One Boring Body With Ineert Holder or Boring Bar Can Be For Boing And Back Boring
- Standaed insert HoIder For Inserts With lead Angle 3°，For a Better Working Performance During Blind Hole Boring.
- The extensive Area Serrated With connection Between insert Holder And Tool Body Provides Higer Tool Rigity And Working Performance.
- All DCK-FBH Fine Boring Tools Are With internal Cooling Design,Which increases The Surface Finish And inserts Tool Life
SKU: Micro-Flnishing Boring Kit
There are no reviews yet.