(1) Minimum cutting width
(2) Maximum cutting width
Boring Bars, Indexable Tools, TURNING TOOLS
C#-HFIR/L-MC Boring Bars for Internal Grooving and Turning with CAMFIX Exchangeable Shanks
Availability:
200 in stock
- Boring Bars for Internal Grooving and Turning with CAMFIX Exchangeable Shanks.
- DGN & GRIP 4.. – 6.. inserts can be used only with right-hand tools, HGPL 4.. – 6.. inserts with left-hand tools.
- After initial groove, no limitation to widening groove outward or toward center.
Based on 0 reviews
0.0 overall
0
0
0
0
0
Be the first to review “C#-HFIR/L-MC Boring Bars for Internal Grooving and Turning with CAMFIX Exchangeable Shanks” Cancel reply
You may also like…
-
Indexable Tools, Parting And Grooving Tools, Grooving Inserts
DGN-W Double-Sided Inserts with Central Ridged Chipformer for Parting and Grooving Hard Materials and Interrupted Cuts
Indexable Tools, Parting And Grooving Tools, Grooving InsertsDGN-W Double-Sided Inserts with Central Ridged Chipformer for Parting and Grooving Hard Materials and Interrupted Cuts
0 out of 5(0)- Double-Sided Inserts with Central Ridged Chipformer for Parting and Grooving Hard Materials and Interrupted Cuts.
- No depth limit.
SKU: DGN-W Double-Sided Inserts with Central Ridged Chipformer for Parting and Grooving Hard Materials and Interrupted Cuts -
Indexable Tools, Parting And Grooving Tools, Grooving Inserts
DGN/DGNC/DGNM-C Double-Sided Parting Inserts for Parting and Grooving Bars, Hard Materials and Tough Applications
Indexable Tools, Parting And Grooving Tools, Grooving InsertsDGN/DGNC/DGNM-C Double-Sided Parting Inserts for Parting and Grooving Bars, Hard Materials and Tough Applications
0 out of 5(0)- Double-Sided Parting Inserts for Parting and Grooving Bars, Hard Materials and Tough Applications.
- The feed values for grade IC20 should be decreased by 50%.
SKU: DGN/DGNC/DGNM-C Double-Sided Parting Inserts for Parting and Grooving Bars, Hard Materials and Tough Applications -
Indexable Tools, Parting And Grooving Tools, Grooving Inserts
DGN/DGNM-J/JS/JT Double-Sided Inserts for Parting and Grooving Soft Materials, Parting Tubes, Small Diameters and Thin-Walled Parts
Indexable Tools, Parting And Grooving Tools, Grooving InsertsDGN/DGNM-J/JS/JT Double-Sided Inserts for Parting and Grooving Soft Materials, Parting Tubes, Small Diameters and Thin-Walled Parts
0 out of 5(0)- Double-Sided Inserts for Parting and Grooving Soft Materials, Parting Tubes, Small Diameters and Thin-Walled Parts.
- JT chipformer has the basic positive configuration of the J-type and a reinforced negative frontal edge; most suitable for soft materials at low to medium feeds.
SKU: DGN/DGNM-J/JS/JT Double-Sided Inserts for Parting and Grooving Soft Materials, Parting Tubes, Small Diameters and Thin-Walled Parts -
Indexable Tools, Parting And Grooving Tools, Grooving Inserts
GRIP (full radius) Utility Double-Ended Full Radius Inserts for External, Internal and Face Machining
Indexable Tools, Parting And Grooving Tools, Grooving InsertsGRIP (full radius) Utility Double-Ended Full Radius Inserts for External, Internal and Face Machining
0 out of 5(0)- Utility Double-Ended Full Radius Inserts for External, Internal and Face Machining.
SKU: GRIP (full radius) Utility Double-Ended Full Radius Inserts for External, Internal and Face Machining
Related products
-
Indexable Tools, Boring and Reaming Tools, Fine boring tools
DBJ10/12/16 Micro-boring head
0 out of 5(0)- Each boring head with three different sizes insert holders for different boring ranges.
- Standard insert holder for inserts with lead angle 3°,for a better working performance during bling blind hole boring.
- Insert holder can be mounted in opposite direction to back boring.
- Better connection between insert holder and tool body provides higher tool prigidty and working performance.
- AII DCK-CBH fine boring tools are with internal cooling design,which increases the surface finish and inserts tool life.
SKU: DBJ10/12/16 Micro-boring head$10.00 – $13.00 -
Indexable Tools, Boring and Reaming Tools, Fine boring tools
NBH2084 Micro-Boring Tool Kit
0 out of 5(0)- Each boring head with three different sizes insert holders for different boring ranges.
- Standard insert holder for inserts with lead angle 3°,for a better working performance during bling blind hole boring.
- Insert holder can be mounted in opposite direction to back boring.
- Better connection between insert holder and tool body provides higher tool prigidty and working performance.
- AII DCK-CBH fine boring tools are with internal cooling design,which increases the surface finish and inserts tool life.
SKU: NBH2084 Micro-Boring Tool Kit$80.00 – $130.00 -
Indexable Tools, Boring and Reaming Tools, Fine boring tools
DBJ16 Micro-boring Bar
0 out of 5(0)- Adjustment Precision 0.002 mm on Diameter.
- One Boring Body With Ineert Holder or Boring Bar Can Be For Boing And Back Boring.
- Standaed insert HoIder For Inserts With lead Angle 3°,For a Better Working Performance During Blind Hole Boring.
- The extensive Area Serrated With connection Between insert Holder And Tool Body Provides Higer Tool Rigity And Working Performance.
SKU: DBJ16 Micro-boring Bar$5.00 – $16.00
There are no reviews yet.