Metrology Categories
Metrology
Showing 1–30 of 38 results
-
Inside Measurement, Metrology
American Ring Gauge External Thread Go-No-Go Gauge Tooth Gauge
- XYC ring gauge material-GCR15 (bearing steel); the hardness of the specification ≤3MM is HRC58-65°, and the hardness of >3MM is HRC58-60°.
- GB/T3934 standard is adopted, and the accuracy of the go-no-go end is 6G, and 5H and 6H grades are also available.
- Ring gauge mark: GO is used to detect the through end, and NOGO is used to indicate the stop end.
- Round anti-skid design, high hardness and wear resistance.
SKU: 002-23042605 -
Inside Measurement, Metrology
American-made Threaded Plug Gauge Bolt Fine Thread High Precision Detection Gauge
Inside Measurement, MetrologyAmerican-made Threaded Plug Gauge Bolt Fine Thread High Precision Detection Gauge
- The thread plug gauge is used for comprehensive inspection of internal threads, and the thread ring gauge is used for comprehensive inspection of external threads.
- How to identify the plug gauge, the threaded plug gauge is composed of two parts, one is called the through end, and the other is called the stop end.
- The through end part of the plug gauge can be screwed into the thread completely, and the stop part can only be screwed into the thread for 1.5-2 turns to be qualified.
- The hardness of the specification ≤3MM is HRC53-60°, and the hardness of >3MM is HRC58-60°.
- The accuracy of the go-no-go end provides 5H, 6H, and 6G, 7H grades are also available.
- Specifications ≤ M1.4 provide 5H accuracy.
SKU: 002-23042602 -
Depth Gages, Metrology
Depth Caliper
- The products are according with GB/T21388 or DIN862.
- Made of carbon steel or Stainless steel.
- The main scale and the vernie are satin chromed.
- The beam and the vernier are entirely heat-treated, all the measuring faces are hardened.
- Special requirement can be satisfied at request.
SKU: Depth Caliper -
Calipers, Metrology
Dial Caliper Stainless
- The products are according with GB/T21389 DIN862 respectively.
- Made of stainless steel and manufactured with modern technology.
- The beam and the vernie are entirely heat-treated. All the measuring faces are hardened.
- The colour of the dial scale and it’s frame can be selected.
- Different measuring systems can be supplied at request: mm, inch,mm/inch,inch/mm
- Special requirement can be satisfied at request
SKU: Dial Caliper Stainless -
Calipers
Digital Calipers (zero type)
- Absolute zero type caliper is the new type digital caliper.
- The absolute zero type caliper can continually track the zero point. Whenever you turn on,the screen can read the position size.
- For the convient measurement.
- The absolute zero type caliper needn’t to be adjusted from time to time Also it wouldn’t cause fault by fast checking.
SKU: Digital Calipers (zero type) -
Micrometers
Digital Outside Micrometer
- Digital Outside Micrometer are widely used for precision measurement
- Measuring system combined by the capacitive angular displacement sensor and electronic digital display parts
- Measured values can be read directly from display , the minimum resolution of 0.001 mm. The micrometer can be connected to the computer and printer by special interface Relative humidity 80% or less is not affected
- Working temperature: 0 ℃ to 40 ℃.
SKU: Digital Outside Micrometer -
-
Inside Measurement
Electronic Digital Display Three Jaw Inside Diameter Micrometer
- Big screen,easy for reading.
- With durable carbide needle.
- Fuctions as preset,set zero,keep data,metric-inch conversion,ect
- Setting gauge can be used to set zero .
- Digital display system is same as the digital outside micrometer.
SKU: Electronic Digital Display Three Jaw Inside Diameter Micrometer -
Height Gages
Height Caliper Dial/Digital Display
- The products are according with GB/T21388 or DIN862.
- Made of carbon steel or Stainless steel.
- The main scale and the vernie are satin chromed.
- The beam and the vernier are entirely heat-treated, all the measuring faces are hardened.
- Special requirement can be satisfied at request.
SKU: Height Caliper Dial -
Inside Measurement
Internal Micrometer With Two-Point Contact
- Internal Micrometer uses screw pair as intermediate real measuring tool, with two contact points for inside measurements. Internal Micrometer is mainly used to measure internal diameter, width of inside groove, or distance between two inside surfaces.
- Wide measuring range, with extension rods set for different measuring range.
- After precision extension rods are changed, micrometer doesn’t need to be set zero again.
- With locking device.
SKU: Internal Micrometer With Two-Point Contact -
-
Inside Measurement, Metrology
Internal Thread Fine Thread Go-no-go Gauge Metric Thread Plug Gauge
- The thread plug gauge is used for comprehensive inspection of internal threads, and the thread ring gauge is used for comprehensive inspection of external threads.
- How to identify the plug gauge, the threaded plug gauge is composed of two parts, one is called the through end, and the other is called the stop end.
- The through end part of the plug gauge can be screwed into the thread completely, and the stop part can only be screwed into the thread for 1.5-2 turns to be qualified.
- The hardness of the specification ≤3MM is HRC53-60°, and the hardness of >3MM is HRC58-60°.
- The accuracy of the go-no-go end provides 5H, 6H, and 6G, 7H grades are also available.
- Specifications ≤ M1.4 provide 5H accuracy.
SKU: 002-23042603 -
Inside Measurement, Metrology
Metric Thread Ring Gauge Go No-Go Gauge
- XYC ring gauge material-GCR15 (bearing steel); the hardness of the specification ≤3MM is HRC58-65°, and the hardness of >3MM is HRC58-60°.
- GB/T3934 standard is adopted, and the accuracy of the go-no-go end is 6G, and 5H and 6H grades are also available.
- Ring gauge mark: GO is used to detect the through end, and NOGO is used to indicate the stop end.
- Round anti-skid design, high hardness and wear resistance.
SKU: 002-23042604 -
Micrometers
Micrometer for measuring pipe wall thickness
- Micrometer for measuring pipe wall thickness uses
the screw pair measuring principle to read the distance
between the spherical measuring face (or knife measuring
face, etc.) and the flat measuring face. There are 4 types
of micrometer for measuring pipe wall thickness according
to different measuring face: Drum measuring face, Knife measuring face, Spherical measuring face, and Cylinder measuring face. - It is mainly used for measuring pipe wall thickness or
common external dimension.
SKU: Micrometer for measuring pipe wall thickness - Micrometer for measuring pipe wall thickness uses
-
Micrometers
Micrometer with dial comparator
- Micrometer with dial comparator is an indicating micrometer, using lever gear driving mechanism to read the axial slight displacement. The micrometer consists of micrometer head and indicator. It is mainly used for outside measurement
and form tolerance measurement. - It can make direct measurement and comparative measurement.
- It can make fast measurement of cylinder diameter, roundness, and parallelism.
- With dial face to set zero, easy to use.
- With tolerance markers, easy for quick check the batch parts are qualified or not.
SKU: Micrometer with dial comparator - Micrometer with dial comparator is an indicating micrometer, using lever gear driving mechanism to read the axial slight displacement. The micrometer consists of micrometer head and indicator. It is mainly used for outside measurement
-
Calipers, Metrology
Mitutoyo 500-196-30 electronic caliper industrial grade 0-300mm Digital Display vernier Caliper
Calipers, MetrologyMitutoyo 500-196-30 electronic caliper industrial grade 0-300mm Digital Display vernier Caliper
-
Large and clear LCD readout.
-
The ZERO/ABS key allows the display to be zero-set at any slider position along the scale for incremental comparison
measurements. This switch also will allow return to the absolute (ABS) coordinate and display of the true position from the
origin point (usually jaws-closed point). -
Data Hold Unit (959143) is optional.
-
Carbide-tipped jaw-type calipers are also available.
-
Thumb roller included only on calipers up to and including 12” or 300mm.
-
Supplied in fitted plastic case. Except 40” / 1000mm supplied in wooden case.
SKU: n/a -