Cut off, slot and groove milling
Showing 181–205 of 205 results
-
Cut off, slot and groove milling, Indexable Tools, Milling Tools
SGSF/A-M-JHP Grooving and Slitting Small Diameter Cutters with FLEXFIT Threaded Adaptation
Cut off, slot and groove milling, Indexable Tools, Milling ToolsSGSF/A-M-JHP Grooving and Slitting Small Diameter Cutters with FLEXFIT Threaded Adaptation
- Grooving and Slitting Small Diameter Cutters with FLEXFIT Threaded Adaptation.
- Number of inserts.
- Key flat size.
- Master insert identification.
SKU: SGSF/A-M-JHP Grooving and Slitting Small Diameter Cutters with FLEXFIT Threaded Adaptation -
Cut off, slot and groove milling, Indexable Tools, Milling Tools
SGSF/A-MM-JHP Grooving and Slitting Small Diameter Cutters with MULTIMASTER Threaded Adaptation
Cut off, slot and groove milling, Indexable Tools, Milling ToolsSGSF/A-MM-JHP Grooving and Slitting Small Diameter Cutters with MULTIMASTER Threaded Adaptation
- Grooving and Slitting Small Diameter Cutters with MULTI-MASTER Threaded Adaptation.
- For best performance use internal coolant with “CH” type shanks.
- Number of inserts.
- Key flat size.
- Master insert identification
SKU: SGSF/A-MM-JHP Grooving and Slitting Small Diameter Cutters with MULTIMASTER Threaded Adaptation -
-
Chamfer milling, Copy milling, contouring, Cut off, slot and groove milling, Face milling, Indexable Tools, Milling Tools
SOE45 8/16 Milling Tools
Chamfer milling, Copy milling, contouring, Cut off, slot and groove milling, Face milling, Indexable Tools, Milling ToolsSOE45 8/16 Milling Tools
- Multifunctional endmills for octagonal, square and round insert contours with various entry angles.
- A- with ONMU 0505… insert.
- B- with S845 SNMU 1305… insert.
- C- with RXMT 1607N insert.
- D- with OXMT 0507R08-FF insert.
- E- with OXMT 050705-R-HP insert.
- Use only Torx Plus keys.
SKU: SOE45 8/16 Milling Tools -
-
Cut off, slot and groove milling, Face milling, Indexable Tools, Milling Tools, Shoulder milling tools
T290 ELN-MM-05 Milling Tools
Cut off, slot and groove milling, Face milling, Indexable Tools, Milling Tools, Shoulder milling toolsT290 ELN-MM-05 Milling Tools
- Endmills with a MULTI-MASTER adaptation carrying tangentially clamped inserts.
- Do not apply lubricant to the MULTI-MASTER threaded connection.
- Number of inserts.
- Clamping wrench size.
SKU: T290 ELN-MM-05 Milling Tools -
Cut off, slot and groove milling, Face milling, Indexable Tools, Milling Tools, Shoulder milling tools
T490 ELN-08 Milling Tools
Cut off, slot and groove milling, Face milling, Indexable Tools, Milling Tools, Shoulder milling toolsT490 ELN-08 Milling Tools
- T490 Line, 90° endmills carrying T490 LNMT/LNHT 08…tangentially clamped inserts with 4 helical, 8 mm long cutting edges.
- “B” suffix with long cylindrical shank which may be shortened.
- Number of inserts.
- C-Cylindrical, W-Weldon.
- 0 – Without coolant supply, 1 – With coolant supply
- Maximum ramping angle – valid only with T490 LNHT 080404PNR-RD inserts.
SKU: T490 ELN-08 Milling Tools -
Cut off, slot and groove milling, Face milling, Indexable Tools, Milling Tools, Shoulder milling tools
T490 ELN-11 Milling Tools
Cut off, slot and groove milling, Face milling, Indexable Tools, Milling Tools, Shoulder milling toolsT490 ELN-11 Milling Tools
- 90° endmills carrying T490 LN#T 11… tangentially clamped inserts.
- Important: Maximum clamping torque 3.2 N*m.
- Recommended key handle for limiting torque to 3.2 N*m for this item is HSD 4-3.2NM (to be used with BLD 4 T15-4.8 blade)
SKU: T490 ELN-11 Milling Tools -
Cut off, slot and groove milling, Face milling, Indexable Tools, Milling Tools, Shoulder milling tools
T490 ELN-13 Milling Tools
Cut off, slot and groove milling, Face milling, Indexable Tools, Milling Tools, Shoulder milling toolsT490 ELN-13 Milling Tools
-
90° endmills carrying T490 LNMT/LNHT 13… tangentially clamped inserts with 4 helical, 12.5 mm long cutting edges.
- Cutting recommendations: at ap=5, fz=0.15 at ap=10, fz=0.1.
- “B” suffix for long cylindrical shank which may be shortened.
- Number of inserts.
- C-Cylindrical, W-Weldon.
- Maximum ramping angle – valid only when T490 LNHT 1306 PNTR-RD insert is used.
SKU: T490 ELN-13 Milling Tools -
-
Cut off, slot and groove milling, Face milling, Indexable Tools, Milling Tools, Shoulder milling tools
T490 ELN-16 Milling Tools
Cut off, slot and groove milling, Face milling, Indexable Tools, Milling Tools, Shoulder milling toolsT490 ELN-16 Milling Tools
- 90° endmills carrying T490 LNMT 16… tangentially clamped inserts with 4 helical, 16 mm long cutting edges (HELITANG T490Line).
- Number of inserts.
- C-Cylindrical, W-Weldon.
SKU: T490 ELN-16 Milling Tools -
Cut off, slot and groove milling, Face milling, Indexable Tools, Milling Tools, Shoulder milling tools
T490 ELN-C#-13 Milling Tools
Cut off, slot and groove milling, Face milling, Indexable Tools, Milling Tools, Shoulder milling toolsT490 ELN-C#-13 Milling Tools
- 90° endmills with CAMFIX shanks carrying T490 LNMT/LNHT 13… tangentially clamped inserts with 4 helical, 12.5 mm long cutting edges (HELITANG T490 Line).
- Number of inserts.
- Maximum ramping angle – valid only when T490 LNHT 1306 PNTR-RD insert is used.
SKU: T490 ELN-C#-13 Milling Tools -
Cut off, slot and groove milling, Face milling, Indexable Tools, Milling Tools, Shoulder milling tools
T490 ELN-M Milling Tools
Cut off, slot and groove milling, Face milling, Indexable Tools, Milling Tools, Shoulder milling toolsT490 ELN-M Milling Tools
- HELITANG, 90° endmills with a FLEXFIT threaded adaptation carrying tangentially clamped inserts with 4 helical cutting edges.
- When mounting items with FLEXFIT threaded adaptation to their holders, the mating surfaces and threaded areas must be thoroughly cleaned.
- Apply appropriate tightening torque to eliminate a gap between the mating faces.
- Estimated torque values are specified in the TQ_3 parameter.
SKU: T490 ELN-M Milling Tools -
Cut off, slot and groove milling, Face milling, Indexable Tools, Milling Tools, Shoulder milling tools
T490 ELN-MM-08 Milling Tools
Cut off, slot and groove milling, Face milling, Indexable Tools, Milling Tools, Shoulder milling toolsT490 ELN-MM-08 Milling Tools
- HELITANG, 90° endmills with a MULTI-MASTER threaded adaptation carrying T490 LNMT/LNHT 08… tangentially clamped inserts with 4 helical, 8 mm long cutting edges.
- Do not apply lubricant to the MULTI-MASTER threaded connection.
- Number of inserts.
- Clamping wrench size.
- Maximum ramping angle – valid only with T490 LNHT 080404PNR-RD inserts.
SKU: T490 ELN-MM-08 Milling Tools -
Cut off, slot and groove milling, Face milling, Indexable Tools, Milling Tools, Shoulder milling tools
T490 FLN-22ST 90° Face Mills Carrying Tangentially Clamped Inserts with 4 Helical 21 mm Long Cutting Edges
Cut off, slot and groove milling, Face milling, Indexable Tools, Milling Tools, Shoulder milling toolsT490 FLN-22ST 90° Face Mills Carrying Tangentially Clamped Inserts with 4 Helical 21 mm Long Cutting Edges
- HELITANG T490 Line, 90° face mills carrying T490 LNMT 2212 tangentially clamped inserts with 4 helical 21 mm long cutting edges.
- Number of inserts.
SKU: T490 FLN-22ST 90° Face Mills Carrying Tangentially Clamped Inserts with 4 Helical 21 mm Long Cutting Edges -
Cut off, slot and groove milling, Indexable Tools, Milling Tools
TGSF Slitting Cutters Carrying TANG-GRIP Inserts
Cut off, slot and groove milling, Indexable Tools, Milling ToolsTGSF Slitting Cutters Carrying TANG-GRIP Inserts
- Slitting Cutters Carrying TANG-GRIP Inserts.
- ETG extractor should be ordered separately.
- For drive flange set dimensions, refer to Drive Flange R.
SKU: TGSF Slitting Cutters Carrying TANG-GRIP Inserts -
Cut off, slot and groove milling, Indexable Tools, Milling Tools
TGSF-JHP Slitting Cutters with Coolant Channels Carrying TANG-GRIP Inserts
Cut off, slot and groove milling, Indexable Tools, Milling ToolsTGSF-JHP Slitting Cutters with Coolant Channels Carrying TANG-GRIP Inserts
- Slitting cutters with coolant channels carrying TANG-GRIP inserts.
- ETG extractor should be ordered separately.
SKU: TGSF-JHP Slitting Cutters with Coolant Channels Carrying TANG-GRIP Inserts -
Cut off, slot and groove milling, Indexable Tools, Milling Tools
TGSF-M-JHP Grooving and Slitting Small Diameter Cutters with FLEXFIT Threaded Adaptation
Cut off, slot and groove milling, Indexable Tools, Milling ToolsTGSF-M-JHP Grooving and Slitting Small Diameter Cutters with FLEXFIT Threaded Adaptation
- Grooving and Slitting Small Diameter Cutters with FLEXFIT Threaded Adaptation.
- For best performance use internal coolant with “CH” type shanks.
- When mounting items with FLEXFIT threaded adaptation to their holders, the mating surfaces and threaded areas must be thoroughly cleaned.
- Apply appropriate tightening torque to eliminate a gap between the mating faces.
- Estimated torque values are specified in the TQ_3 parameter.
SKU: TGSF-M-JHP Grooving and Slitting Small Diameter Cutters with FLEXFIT Threaded Adaptation -
Cut off, slot and groove milling, Indexable Tools, Milling Tools
TGSF-MM-JHP Grooving and Slitting Small Diameter Cutters with MULTIMASTER Threaded Adaptation
Cut off, slot and groove milling, Indexable Tools, Milling ToolsTGSF-MM-JHP Grooving and Slitting Small Diameter Cutters with MULTIMASTER Threaded Adaptation
- Grooving and Slitting Small Diameter Cutters with MULTI-MASTER Threaded Adaptation.
- For best performance use internal coolant with “CH” type shanks.
- Number of inserts.
- Key flat size.
- Master insert identification.
SKU: TGSF-MM-JHP Grooving and Slitting Small Diameter Cutters with MULTIMASTER Threaded Adaptation -
Cut off, slot and groove milling, Indexable Tools, Milling Tools
The Cartridges for Adjustable API Ring Groover
Cut off, slot and groove milling, Indexable Tools, Milling ToolsThe Cartridges for Adjustable API Ring Groover
- It is suitable for any size of main body, and it can be assembled freely and stably.
- The ID and OD are one-to-one correspondence and with different inserts.
SKU: The Cartridges for Adjustable API Ring Groover