Cut off, slot and groove milling
Showing 151–180 of 205 results
-
Cut off, slot and groove milling, Indexable Tools, Milling Tools
Interchangeable Solid Carbide Small Diameter Groove Milling Heads MM GRIT-16K/P,18K/P MM GRIT-16K/P,18K/P
Cut off, slot and groove milling, Indexable Tools, Milling ToolsInterchangeable Solid Carbide Small Diameter Groove Milling Heads MM GRIT-16K/P,18K/P MM GRIT-16K/P,18K/P
- MULTI-MASTER interchangeable solid carbide small diameter, groove milling heads.
- “K” for general steel machinin, “P” Positive geometry for soft and gummy materials.
- Tightening torque: 1000 N.cm.
- Modification options on request.
- Recommended for O-rings and retaining rings.
- Do not apply lubricant to the threaded connection.
SKU: Interchangeable Solid Carbide Small Diameter Groove Milling Heads MM GRIT-16K/P,18K/P MM GRIT-16K/P,18K/P -
Cut off, slot and groove milling, Indexable Tools, Milling Tools
Interchangeable Solid Carbide Small Diameter Groove Milling Heads MM GRIT-22K/P,28K/P
Cut off, slot and groove milling, Indexable Tools, Milling ToolsInterchangeable Solid Carbide Small Diameter Groove Milling Heads MM GRIT-22K/P,28K/P
- MULTI-MASTER interchangeable solid carbide small diameter, groove milling heads.
- “P” suffix for sharp cutting edge.
- “K” suffix for T-land on cutting edge, to be used on steel and cast iron.
- Recommended for O-rings and retaining rings.
- Tightening torque for MM GRIT 22: 1500 Nxcm, for MM GRIT 28: 2800 Nxcm.
- Modification options on request.
- Do not apply lubricant to the threaded connection.
SKU: Interchangeable Solid Carbide Small Diameter Groove Milling Heads MM GRIT-22K/P,28K/P -
Cut off, slot and groove milling, Indexable Tools, Milling Tools
Interchangeable Solid Carbide T-Slot Milling Heads MM TS-H
Cut off, slot and groove milling, Indexable Tools, Milling ToolsInterchangeable Solid Carbide T-Slot Milling Heads MM TS-H
- Interchangeable solid carbide T-Slot milling heads with various corner radii and MULTI-MASTER threaded adaptation.
- Inserts in 5 mm and wider feature chip splitting edges.
- Do not apply lubricant to the threaded connection.
- Cutting depth maximum.
- Number of flutes.
- Optional, should be ordered separately.
SKU: Interchangeable Solid Carbide T-Slot Milling Heads MM TS-H -
Cut off, slot and groove milling, Indexable Tools, Milling Tools
Interchangeable Solid Carbide T-Slot Milling Heads MM TS-N
Cut off, slot and groove milling, Indexable Tools, Milling ToolsInterchangeable Solid Carbide T-Slot Milling Heads MM TS-N
- MULTI-MASTER interchangeable solid carbide T-Slot milling heads.
- Do not apply lubricant to the threaded connection.
- Number of flutes.
- Cutting depth maximum.
- Optional, should be ordered separately.
SKU: Interchangeable Solid Carbide T-Slot Milling Heads MM TS-N -
Chamfer milling, Cut off, slot and groove milling, Milling Tools, Shoulder milling tools
LN 15 Side and Face Milling Cutter (No.1)
Chamfer milling, Cut off, slot and groove milling, Milling Tools, Shoulder milling toolsLN 15 Side and Face Milling Cutter (No.1)
- Side and face milling cutter is a standard machine tool.
- All three cutting edges have back angles, which are sharp and easy to cut.
SKU: LN 15 Side and Face Milling Cutter (No.1) -
Chamfer milling, Cut off, slot and groove milling, Milling Tools, Shoulder milling tools
LN 15 Side and Face Milling Cutter (No.2)
Chamfer milling, Cut off, slot and groove milling, Milling Tools, Shoulder milling toolsLN 15 Side and Face Milling Cutter (No.2)
- Side and face milling cutter is a standard machine tool.
- All three cutting edges have back angles, which are sharp and easy to cut.
SKU: LN 15 Side and Face Milling Cutter (No.2) -
Chamfer milling, Cut off, slot and groove milling, Milling Tools, Shoulder milling tools
LN11 Side and Face Milling Cutter (No.1)
Chamfer milling, Cut off, slot and groove milling, Milling Tools, Shoulder milling toolsLN11 Side and Face Milling Cutter (No.1)
- Side and face milling cutter is a standard machine tool.
- All three cutting edges have back angles, which are sharp and easy to cut.
SKU: LN11 Side and Face Milling Cutter (No.1) -
Chamfer milling, Cut off, slot and groove milling, Milling Tools, Shoulder milling tools
LN11 Side and Face Milling Cutter (No.2)
Chamfer milling, Cut off, slot and groove milling, Milling Tools, Shoulder milling toolsLN11 Side and Face Milling Cutter (No.2)
- Side and face milling cutter is a standard machine tool.
- All three cutting edges have back angles, which are sharp and easy to cut.
SKU: LN11 Side and Face Milling Cutter (No.2) -
Copy milling, contouring, Cut off, slot and groove milling, Indexable Tools, Milling Tools
MM HT Torodial 2 Flute Interchangeable Solid Carbide Heads MM HT
Copy milling, contouring, Cut off, slot and groove milling, Indexable Tools, Milling ToolsMM HT Torodial 2 Flute Interchangeable Solid Carbide Heads MM HT
- Interchangeable 2 flute torodial solid carbide milling heads.
- Do not apply lubricant to the threaded connection.
- Number of flutes.
- Specially tailored radius range upon request.
SKU: MM HT Torodial 2 Flute Interchangeable Solid Carbide Heads MM HT -
Cut off, slot and groove milling, Indexable Tools, Milling Tools, Shoulder milling tools
P290 EPW Milling Tools
Cut off, slot and groove milling, Indexable Tools, Milling Tools, Shoulder milling toolsP290 EPW Milling Tools
- Long reach endmills carrying 12 and 18 mm long edged inserts.
- Number of inserts.
- C-Cylindrical, W-Weldon.
- Maximum ramping angle.
- The P290 tools should be used at small ae (radial depth of cut) for best performance.
- All tools have coolant holes directed to each insert cutting edge.
SKU: P290 EPW Milling Tools -
Cut off, slot and groove milling, Indexable Tools, Milling Tools, Shoulder milling tools
P290 EPW-M Milling Tools
Cut off, slot and groove milling, Indexable Tools, Milling Tools, Shoulder milling toolsP290 EPW-M Milling Tools
- Endmills with FLEXFIT threaded adaptation carrying 12 and 18 mm long edged inserts.
-
When mounting items with FLEXFIT threaded adaptation to their holders, the mating surfaces and threaded areas must be thoroughly cleaned.
-
Apply appropriate tightening torque to eliminate a gap between the mating faces.
-
Estimated torque values are specified in the TQ_3 parameter.
- The P290 tools should be used at small ae (radial depth of cut) for best performance.
- All tools have coolant holes directed to each insert cutting edge.
SKU: P290 EPW-M Milling Tools -
Cut off, slot and groove milling, Face milling, Indexable Tools, Milling Tools, Shoulder milling tools
P290 FPW/FCT 90° Face Mills Carrying 12 and 18 mm Long Edged Inserts
Cut off, slot and groove milling, Face milling, Indexable Tools, Milling Tools, Shoulder milling toolsP290 FPW/FCT 90° Face Mills Carrying 12 and 18 mm Long Edged Inserts
-
90° face mills carrying 12 and 18 mm long edged inserts.
- To be used only with P290 ACCT 1806PDR-HL/TL straight-edged inserts.
- Number of inserts.
- Maximum ramping angle.
SKU: P290 FPW/FCT 90° Face Mills Carrying 12 and 18 mm Long Edged Inserts -
-
Cut off, slot and groove milling, Indexable Tools, Milling Tools
Round Nose T-slot Milling Cutter Bar CNC Slotting Three-sided Edge Milling Cutter Disc Cutter Bar
Cut off, slot and groove milling, Indexable Tools, Milling ToolsRound Nose T-slot Milling Cutter Bar CNC Slotting Three-sided Edge Milling Cutter Disc Cutter Bar
- Reduce blade wear and tear.
- Hardened by quenching, easy milling.
- Perfect fit, high precision.
- Fast cutting, smooth chip removal.
SKU: 001-23041804 -
Cut off, slot and groove milling, Indexable Tools, Milling Tools
SD FM-S-A-SP Stepped Cylindrical Shanks for Interchangeable Solid Carbide Face Milling Heads
Cut off, slot and groove milling, Indexable Tools, Milling ToolsSD FM-S-A-SP Stepped Cylindrical Shanks for Interchangeable Solid Carbide Face Milling Heads
- Stepped cylindrical shanks for interchangeable solid carbide face milling heads.
- Apply lubricant to the clamping screw.
- C-Cylindrical, W-Weldon.
SKU: SD FM-S-A-SP Stepped Cylindrical Shanks for Interchangeable Solid Carbide Face Milling Heads -
Cut off, slot and groove milling, Indexable Tools, Milling Tools, Tool Holders
SD-SP Interchangeable Solid Carbide T-Slot Milling Heads
Cut off, slot and groove milling, Indexable Tools, Milling Tools, Tool HoldersSD-SP Interchangeable Solid Carbide T-Slot Milling Heads
- Interchangeable Solid Carbide T-Slot Milling Heads.
- Maximum feed: 0.1 mm/tooth.
- Cutting depth maximum.
- Number of flutes.
SKU: SD-SP Interchangeable Solid Carbide T-Slot Milling Heads -
Cut off, slot and groove milling, Face milling, Indexable Tools, Milling Tools, Shoulder milling tools
SDN-CALN11 Full Slot Disk Type Slotting Cutters with Cartridges Carrying Tangentially Mounted LN.. 1106.. Inserts
Cut off, slot and groove milling, Face milling, Indexable Tools, Milling Tools, Shoulder milling toolsSDN-CALN11 Full Slot Disk Type Slotting Cutters with Cartridges Carrying Tangentially Mounted LN.. 1106.. Inserts
- Full Slot Disk Type Slotting Cutters with Cartridges Carrying Tangentially Mounted LN.. 1106.. Inserts.
- Each cutter body can be changed into full slot, bottom or top milling configuration by mounting the cartridges accordingly.
- Half of the inserts are used on right-hand cartridges and half on left-hand cartridges.
- Gang-mill assembly SDN and left-hand SSB cutters feature two keyways.
- To reduce vibration, it is recommended to assemble gang-mills with alternating keyway position.
SKU: SDN-CALN11 Full Slot Disk Type Slotting Cutters with Cartridges Carrying Tangentially Mounted LN.. 1106.. Inserts -
Cut off, slot and groove milling, Indexable Tools, Milling Tools, Shoulder milling tools
SDN-CALN12 Full Slot Disk Type Slotting Cutters with Cartridges Carrying LNET 12… Tangentially Mounted Inserts
Cut off, slot and groove milling, Indexable Tools, Milling Tools, Shoulder milling toolsSDN-CALN12 Full Slot Disk Type Slotting Cutters with Cartridges Carrying LNET 12… Tangentially Mounted Inserts
- Full Slot Disk Type Slotting Cutters with Cartridges Carrying LNET 12… Tangentially Mounted Inserts.
- Number of inserts.
SKU: SDN-CALN12 Full Slot Disk Type Slotting Cutters with Cartridges Carrying LNET 12... Tangentially Mounted Inserts -
Cut off, slot and groove milling, Indexable Tools, Milling Tools, Shoulder milling tools
SDN-CALN13 Full Slot Adjustable Slotting Cutters with Cartridges Carrying T490 LNHT 1306PNTR/L Inserts (17.5-23.0 mm width range)
Cut off, slot and groove milling, Indexable Tools, Milling Tools, Shoulder milling toolsSDN-CALN13 Full Slot Adjustable Slotting Cutters with Cartridges Carrying T490 LNHT 1306PNTR/L Inserts (17.5-23.0 mm width range)
- Full Slot Adjustable Slotting Cutters with Cartridges Carrying T490 LNHT 1306PNTR/L Inserts.
- Each cutter body can be changed into full slot, bottom or top milling configuration by mounting the cartridges accordingly.
- Half of the inserts are used on right-hand cartridges and half on left-hand cartridges.
- Gang-mill assembly SDN and left-hand SSB cutters feature two keyways.
- To reduce vibration, it is recommended to assemble gang-mills with alternating keyway position.
SKU: SDN-CALN13 Full Slot Adjustable Slotting Cutters with Cartridges Carrying T490 LNHT 1306PNTR/L Inserts (17.5-23.0 mm width range) -
Cut off, slot and groove milling, Indexable Tools, Milling Tools, Shoulder milling tools
SDN-CALN15 Full Slot Disk Type Slotting Cutters with Cartridges Carrying Tangentially Mounted LN.. 1506.. Inserts
Cut off, slot and groove milling, Indexable Tools, Milling Tools, Shoulder milling toolsSDN-CALN15 Full Slot Disk Type Slotting Cutters with Cartridges Carrying Tangentially Mounted LN.. 1506.. Inserts
- Full Slot Disk Type Slotting Cutters with Cartridges Carrying Tangentially Mounted LN.. 1506.. Inserts.
- Each cutter body can be changed into full slot, bottom or top milling configuration by mounting the cartridges accordingly.
- Half of the inserts are used on right-hand cartridges and half on left-hand cartridges.
- Gang-mill assembly SDN and left-hand SSB cutters feature two keyways.
- To reduce vibration, it is recommended to assemble gang-mills with alternating keyway position.
SKU: SDN-CALN15 Full Slot Disk Type Slotting Cutters with Cartridges Carrying Tangentially Mounted LN.. 1506.. Inserts -
Cut off, slot and groove milling, Indexable Tools, Milling Tools, Shoulder milling tools
SDN-CAPM15 Full Slot Adjustable Slotting Cutters with Cartridges Carrying LNAT 1506…-PM Inserts (18.9-25.6 mm width range)
Cut off, slot and groove milling, Indexable Tools, Milling Tools, Shoulder milling toolsSDN-CAPM15 Full Slot Adjustable Slotting Cutters with Cartridges Carrying LNAT 1506…-PM Inserts (18.9-25.6 mm width range)
- Full Slot Adjustable Slotting Cutters with Cartridges Carrying LNAT 1506…-PM Inserts.
- Each cutter can be changed into full slot, bottom or top milling configuration.
- Use A type cartridges for inserts with 0.8-1.6 mm radii, B type cartridges for inserts with 2.5-3.2 mm radii and C type cartridges for insertswith 4.0 mm radius.
- Each cutter features two keyways.
- To reduce vibration, it is recommended to assemble gang-mills with alternating keyway position.
SKU: SDN-CAPM15 Full Slot Adjustable Slotting Cutters with Cartridges Carrying LNAT 1506...-PM Inserts (18.9-25.6 mm width range) -
Cut off, slot and groove milling, Indexable Tools, Milling Tools
SDN-LN12 Full Slot Disk Type Slotting Cutters Carrying LNET 12 Tangentially Mounted Inserts
Cut off, slot and groove milling, Indexable Tools, Milling ToolsSDN-LN12 Full Slot Disk Type Slotting Cutters Carrying LNET 12 Tangentially Mounted Inserts
- Full Slot Disk Type Slotting Cutters Carrying LNET 12 Tangentially Mounted Inserts.
- Each tool is supplied with screws for the thinnest specified insert; verify use of the correct screw for the insert being used .
- For more than one insert option, slot width depends on the selected insert width.
- Gang-mill assembly SDN and left-hand SSB cutters feature two keyways.
- To reduce vibration, it is recommended to assemble gang-mills with alternating keyway position.
SKU: SDN-LN12 Full Slot Disk Type Slotting Cutters Carrying LNET 12 Tangentially Mounted Inserts -
Cut off, slot and groove milling, Indexable Tools, Milling Tools
SDN-XN13 Full Slot Disk Type Slotting Cutters Carrying XNMU 1306 Square Inserts with 4 Right- and 4 Left-Hand Cutting Edges
Cut off, slot and groove milling, Indexable Tools, Milling ToolsSDN-XN13 Full Slot Disk Type Slotting Cutters Carrying XNMU 1306 Square Inserts with 4 Right- and 4 Left-Hand Cutting Edges
- Full Slot Disk Type Slotting Cutters Carrying XNMU 1306 Square Inserts with 4 Right- and 4 Left-Hand Cutting Edges.
- Number of inserts.
- Cutting depth maximum.
SKU: SDN-XN13 Full Slot Disk Type Slotting Cutters Carrying XNMU 1306 Square Inserts with 4 Right- and 4 Left-Hand Cutting Edges -
Cut off, slot and groove milling, Indexable Tools, Milling Tools
SGSA Slitting Cutters Carrying GSAN Self-Clamped Inserts
Cut off, slot and groove milling, Indexable Tools, Milling ToolsSGSA Slitting Cutters Carrying GSAN Self-Clamped Inserts
- Slitting Cutters Carrying GSAN Self-Clamped Inserts.
- For LB,DBS,D4 refer to SW/S drive shanks and R drive flange set.
- Maximum RPM may not be exceeded.
SKU: SGSA Slitting Cutters Carrying GSAN Self-Clamped Inserts -
Cut off, slot and groove milling, Indexable Tools, Milling Tools
SGSF Slitting Cutters Carrying Self-Clamped Inserts
Cut off, slot and groove milling, Indexable Tools, Milling ToolsSGSF Slitting Cutters Carrying Self-Clamped Inserts
-
Slitting cutters carrying SELF-GRIP inserts.
-
Only the K type cutters feature 4 driving holes around the central hole; they can be driven by the R drive shanks.
- Refer to SW/S drive shanks and R driving flange set.
- Maximum RPM may not be exceeded.
SKU: SGSF Slitting Cutters Carrying Self-Clamped Inserts -
-
Cut off, slot and groove milling, Indexable Tools, Milling Tools
SGSF-W Grooving and Slitting Cutters with Integral Weldon Shanks
Cut off, slot and groove milling, Indexable Tools, Milling ToolsSGSF-W Grooving and Slitting Cutters with Integral Weldon Shanks
- Grooving and Slitting Cutters with Integral Weldon Shanks.
- Standard GSFN 2.4 mm inserts are not suitable for this tool; for suitable tool, see specific pocket size.
- Minimum cutting width.
- Maximum cutting width.
- Cutting depth maximum.
- Number of flutes.
- Minimum overhang range.
- Maximum overhang range.
- Master insert identification.
SKU: SGSF-W Grooving and Slitting Cutters with Integral Weldon Shanks