Cut off, slot and groove milling
Showing 31–60 of 205 results
-
Cut off, slot and groove milling, Face milling, Indexable Tools, Milling Tools, Shoulder milling tools
90° Face Mills with Tangentially Clamped Inserts T490 FLN-08
Cut off, slot and groove milling, Face milling, Indexable Tools, Milling Tools, Shoulder milling tools90° Face Mills with Tangentially Clamped Inserts T490 FLN-08
- 90° face mills with tangentially clamped inserts.
-
When machining slots, regular pitch cutters should be used.
- Fine pitch.
- Extra fine pitch.
- Number of inserts.
- 0 – Without coolant supply, 1 – With coolant supply.
SKU: 90° Face Mills with Tangentially Clamped Inserts T490 FLN-08 -
Chamfer milling, Cut off, slot and groove milling, Milling Tools, Shoulder milling tools
Adjustable Side and Face Milling Cutter
Chamfer milling, Cut off, slot and groove milling, Milling Tools, Shoulder milling toolsAdjustable Side and Face Milling Cutter
- It is with cartridge with different inserts; It can mill the surface and groove; the diameter of standard milling Φ200-Φ500.
- It should be customized if the diameter is larger than Φ500 mm.
SKU: Adjustable Side and Face Milling Cutter -
Cut off, slot and groove milling, Indexable Tools, Milling Tools
API Ring Grooving Cutter
- For API ring groove machining both rough and finish.
- Inside cartridge and outside cartridge can be adjusted separately with 0.01 mm on diameter per scale, wide diameter range, high accuracy and easy operating.
SKU: API Ring Grooving Cutter -
Cut off, slot and groove milling, Indexable Tools, Milling Tools, Shoulder milling tools
APK-FE Extended Flute Endmills Carrying APKT/R-10… Inserts
Cut off, slot and groove milling, Indexable Tools, Milling Tools, Shoulder milling toolsAPK-FE Extended Flute Endmills Carrying APKT/R-10… Inserts
- Extended flute endmills carrying HELIMILL APKT/R-10… inserts.
- Inserts with large corner radii can only be mounted in the face position of the cutter.
- Number of flutes.
- Number of inserts.
- W-Weldon.
- Maximum ramping angle.
SKU: APK-FE Extended Flute Endmills Carrying APKT/R-10... Inserts -
Cut off, slot and groove milling, Face milling, Indexable Tools, Milling Tools, Shoulder milling tools
Boring millers XMP01
Cut off, slot and groove milling, Face milling, Indexable Tools, Milling Tools, Shoulder milling toolsBoring millers XMP01
- Diameter range Ø80-Ø400.
- Inserts are vertically loaded with 90 degrees approach angle. Both axial and radical cutting width could be adjusted according to customers’ demands. Opened chip pocket, which lead to unobstructed chip removal. It has large width of bottom edges, which helps to strengthen the capability of helical interpolation milling holes. It is generally loaded inserts for two kinds chipbreaker, while fits for different machining conditions.
SKU: Boring millers XMP01 -
Cut off, slot and groove milling, Indexable Tools, Milling Tools, Shoulder milling tools
Combination of Roughing and Finishing Interchangeable Solid Carbide Endmill Heads MM EFS
Cut off, slot and groove milling, Indexable Tools, Milling Tools, Shoulder milling toolsCombination of Roughing and Finishing Interchangeable Solid Carbide Endmill Heads MM EFS
- FINISHRED, combination of roughing and finishing interchangeable solid carbide endmill heads.
- Part of the MULTI-MASTER system.
- Do not apply lubricant to the threaded connection.
- Number of flutes.
SKU: Combination of Roughing and Finishing Interchangeable Solid Carbide Endmill Heads MM EFS -
Cut off, slot and groove milling, Indexable Tools, Milling Tools
Double-Groove Internal Grooving Heads MM TS-DG
Cut off, slot and groove milling, Indexable Tools, Milling ToolsDouble-Groove Internal Grooving Heads MM TS-DG
- Double-groove internal grooving heads with threaded connection for tube sheets of heat exchangers.
- Do not apply lubricant to the threaded connection.
- For minimum tube outer diameter.
- Number of flutes.
- Clamping wrench size.
- Optional, should be ordered separately.
SKU: Double-Groove Internal Grooving Heads MM TS-DG -
-
Cut off, slot and groove milling, Indexable Tools, Milling Tools, Shoulder milling tools
E90CN Miliing Tools
Cut off, slot and groove milling, Indexable Tools, Milling Tools, Shoulder milling toolsE90CN Miliing Tools
- 90° endmills carrying CNMT/HT .. inserts.
- Used mainly for milling square shoulders providing excellent finish of the shoulder side surface.
- They can ramp into the material to machine cavities.
SKU: E90CN Miliing Tools -
Cut off, slot and groove milling, Indexable Tools, Milling Tools, Shoulder milling tools
E90CN-M Milling Tools
Cut off, slot and groove milling, Indexable Tools, Milling Tools, Shoulder milling toolsE90CN-M Milling Tools
- 90° endmills with a FLEXFIT threaded adaptation carrying CNMT/HT .. inserts.
- Used mainly for milling square shoulders providing excellent finish of the shoulder side surface.
- In addition, they can ramp into the material to machine cavities.
- When mounting items with FLEXFIT threaded adaptation to their holders, the mating surfaces and threaded areas must be thoroughly cleaned.
- Apply appropriate tightening torque to eliminate a gap between the mating faces.
- Estimated torque values are specified in the TQ_3 parameter.
SKU: E90CN-M Milling Tools -
Copy milling, contouring, Cut off, slot and groove milling, Face milling, High-feed milling, Indexable Tools, Milling Tools, Shoulder milling tools
E90SO-04 Milling Tools
Copy milling, contouring, Cut off, slot and groove milling, Face milling, High-feed milling, Indexable Tools, Milling Tools, Shoulder milling toolsE90SO-04 Milling Tools
- Endmills carrying 2 insert geometries, square inserts for 90° shouldering, square inserts for fast feed milling applications.
- Tightening torque 0.5 Nxm.
- C-Cylindrical.
- Number of inserts.
- Maximum ramping angle – valid only with SOMT 040208 PNR-FF insert.
SKU: E90SO-04 Milling Tools -
Copy milling, contouring, Cut off, slot and groove milling, Face milling, High-feed milling, Indexable Tools, Milling Tools, Shoulder milling tools
E90SO-MM-04 Milling Tools
Copy milling, contouring, Cut off, slot and groove milling, Face milling, High-feed milling, Indexable Tools, Milling Tools, Shoulder milling toolsE90SO-MM-04 Milling Tools
- Endmills with a MULTI-MASTER threaded connection carrying 2 insert geometries.
- Square inserts for 90° shouldering, square inserts for fast feed milling applications.
- Tightening torque 0.5 Nxm.
SKU: E90SO-MM-04 Milling Tools -
Cut off, slot and groove milling, Indexable Tools, Milling Tools, Shoulder milling tools
E90XC Milling Tools
Cut off, slot and groove milling, Indexable Tools, Milling Tools, Shoulder milling toolsE90XC Milling Tools
- Drilling endmills carrying S/XOMT inserts.
- Use the XOMT 06…. insert in central face location.
- Number of inserts.
- Number of flutes.
- C-Cylindrical.
- 0 – Without coolant supply, 1 – With coolant supply.
SKU: E90XC Milling Tools -
-
Cut off, slot and groove milling, Indexable Tools, Milling Tools
ETS-LN08-M Grooving and Slitting Cutters with FLEXFIT Threaded Adaptation
Cut off, slot and groove milling, Indexable Tools, Milling ToolsETS-LN08-M Grooving and Slitting Cutters with FLEXFIT Threaded Adaptation
- Grooving and Slitting Cutters with FLEXFIT Threaded Adaptation.
- When mounting items with FLEXFIT threaded adaptation to their holders, the mating surfaces and threaded areas must be thoroughly cleaned.
- Apply appropriate tightening torque to eliminate a gap between the mating faces.
- Estimated torque values are specified in the TQ_3 parameter.
SKU: ETS-LN08-M Grooving and Slitting Cutters with FLEXFIT Threaded Adaptation -
Cut off, slot and groove milling, Indexable Tools, Milling Tools
ETS-XN13 T-Slot Endmills Carrying XNMU 1306 Square Inserts with 4 Rightand 4 Left-Hand Cutting Edges
Cut off, slot and groove milling, Indexable Tools, Milling ToolsETS-XN13 T-Slot Endmills Carrying XNMU 1306 Square Inserts with 4 Rightand 4 Left-Hand Cutting Edges
- T-Slot Endmills Carrying XNMU 1306 Square Inserts with 4 Right- and 4 Left-Hand Cutting Edges.
- Number of flutes.
- Minimum cutting width.
- W-Weldon.
SKU: ETS-XN13 T-Slot Endmills Carrying XNMU 1306 Square Inserts with 4 Rightand 4 Left-Hand Cutting Edges -
Cut off, slot and groove milling, Indexable Tools, Milling Tools
Fast Feed Round Nose Three-sided Edge Milling Cutter Disc CNC Slotting Milling Cutter Bar
Cut off, slot and groove milling, Indexable Tools, Milling ToolsFast Feed Round Nose Three-sided Edge Milling Cutter Disc CNC Slotting Milling Cutter Bar
- Reduce blade wear and tear.
- Hardened by quenching, easy milling.
- Perfect fit, high precision.
- Fast cutting, smooth chip removal.
SKU: 001-23041802 -
Cut off, slot and groove milling, Face milling, Indexable Tools, Milling Tools, Shoulder milling tools
FDN Full Slot Flange-Type Slotting Cutters
Cut off, slot and groove milling, Face milling, Indexable Tools, Milling Tools, Shoulder milling toolsFDN Full Slot Flange-Type Slotting Cutters
- Full Slot Flange-Type Slotting Cutters.
- Cutting depth maximum.
- Number of inserts.
- Master insert identification.
SKU: FDN Full Slot Flange-Type Slotting Cutters -
Cut off, slot and groove milling, Face milling, Indexable Tools, Milling Tools, Shoulder milling tools
FDN-CALN11 Full Slot Flange Type Slotting Cutters with Cartridges Carrying Tangentially Mounted LN.. 1106.. Inserts
Cut off, slot and groove milling, Face milling, Indexable Tools, Milling Tools, Shoulder milling toolsFDN-CALN11 Full Slot Flange Type Slotting Cutters with Cartridges Carrying Tangentially Mounted LN.. 1106.. Inserts
- Full Slot Flange Type Slotting Cutters with Cartridges Carrying Tangentially Mounted LN.. 1106.. Inserts.
- The cutter will be set to the minimum width range, unless a specific width is requested by the user..
- Half of the inserts are used on right-hand cartridges and half on left-hand cartridges.
SKU: FDN-CALN11 Full Slot Flange Type Slotting Cutters with Cartridges Carrying Tangentially Mounted LN.. 1106.. Inserts -
Cut off, slot and groove milling, Indexable Tools, Milling Tools, Shoulder milling tools
FDN-CALN12 Full Slot Adjustable Slotting Cutters with Cartridges Carrying LNET 12 Inserts
Cut off, slot and groove milling, Indexable Tools, Milling Tools, Shoulder milling toolsFDN-CALN12 Full Slot Adjustable Slotting Cutters with Cartridges Carrying LNET 12 Inserts
- Full Slot Adjustable Slotting Cutters with Cartridges Carrying LNET 12 Inserts.
- Slot width depends on the selected insert width; verify use of correct screw for the insert being used.
SKU: FDN-CALN12 Full Slot Adjustable Slotting Cutters with Cartridges Carrying LNET 12 Inserts -
Cut off, slot and groove milling, Face milling, Indexable Tools, Milling Tools, Shoulder milling tools
FDN-CALN13 Full Slot Adjustable Slotting Cutters with Cartridges Carrying T490 LNHT 1306PNTR/L Inserts (17.5-23.0 mm width range)
Cut off, slot and groove milling, Face milling, Indexable Tools, Milling Tools, Shoulder milling toolsFDN-CALN13 Full Slot Adjustable Slotting Cutters with Cartridges Carrying T490 LNHT 1306PNTR/L Inserts (17.5-23.0 mm width range)
- Full Slot Adjustable Slotting Cutters with Cartridges Carrying T490 LNHT 1306PNTR/L Inserts (17.5-23.0 mm width range).
- Half of the inserts are used on right-hand cartridges and half on left-hand cartridges.
- The cutter will be set to the minimum width range, unless a specific width is requested by the user.
SKU: FDN-CALN13 Full Slot Adjustable Slotting Cutters with Cartridges Carrying T490 LNHT 1306PNTR/L Inserts (17.5-23.0 mm width range) -
Cut off, slot and groove milling, Face milling, Indexable Tools, Shoulder milling tools
FDN-CALN15 Full Slot Adjustable Slotting Cutters with Cartridges Carrying LN.. 1506… Inserts (18.9-25.6 mm width range)
Cut off, slot and groove milling, Face milling, Indexable Tools, Shoulder milling toolsFDN-CALN15 Full Slot Adjustable Slotting Cutters with Cartridges Carrying LN.. 1506… Inserts (18.9-25.6 mm width range)
- Full Slot Adjustable Slotting Cutters with Cartridges Carrying LN.. 1506… Inserts (18.9-25.6 mm width range).
- Each cutter body can be changed into full slot, bottom or top milling configuration, by mounting the cartridges accordingly.
- Minimum cutting width.
- The cutter will be set to the minimum width range, unless a specific width is requested by the user.
- Maximum cutting width.
- Cutting depth maximum.
- Number of inserts.
SKU: FDN-CALN15 Full Slot Adjustable Slotting Cutters with Cartridges Carrying LN.. 1506... Inserts (18.9-25.6 mm width range) -
Cut off, slot and groove milling, Face milling, Indexable Tools, Milling Tools, Shoulder milling tools
FDN-CAPM15 Full Slot Adjustable Slotting Cutters with Cartridges Carrying LNAT 1506…-PM Inserts (18.9-25.6 mm width range)
Cut off, slot and groove milling, Face milling, Indexable Tools, Milling Tools, Shoulder milling toolsFDN-CAPM15 Full Slot Adjustable Slotting Cutters with Cartridges Carrying LNAT 1506…-PM Inserts (18.9-25.6 mm width range)
- Full Slot Adjustable Slotting Cutters with Cartridges Carrying LNAT 1506…-PM Inserts (18.9-25.6 mm width range).
- Use A type cartridges for inserts with 0.8-1.6 mm radii, B type cartridges for inserts with 2.5-3.2 mm radii and C type cartridges for inserts with 4.0 mm radius.
- Minimum cutting width.
- The cutter will be set to the minimum width range, unless a specific width is requested by the user.
- Maximum cutting width.
- Cutting depth maximum.
- Number of inserts.
SKU: FDN-CAPM15 Full Slot Adjustable Slotting Cutters with Cartridges Carrying LNAT 1506...-PM Inserts (18.9-25.6 mm width range) -
Cut off, slot and groove milling, Face milling, Indexable Tools, Milling Tools, Shoulder milling tools
FDN-CF4 Full Slot Flange-Type Slotting Cutters with CLICKFIT Adaptation
Cut off, slot and groove milling, Face milling, Indexable Tools, Milling Tools, Shoulder milling toolsFDN-CF4 Full Slot Flange-Type Slotting Cutters with CLICKFIT Adaptation
- Full Slot Flange-Type Slotting Cutters with CLICKFIT Adaptation.
- Number of inserts.
- Cutting depth maximum.
SKU: FDN-CF4 Full Slot Flange-Type Slotting Cutters with CLICKFIT Adaptation -
Chamfer milling, Cut off, slot and groove milling, Face milling, Indexable Tools, Milling Tools, Shoulder milling tools
FDN-CM Flange Type Full Width Slotting Cutters Carrying Round and Octagonal Inserts
Chamfer milling, Cut off, slot and groove milling, Face milling, Indexable Tools, Milling Tools, Shoulder milling toolsFDN-CM Flange Type Full Width Slotting Cutters Carrying Round and Octagonal Inserts
- Flange Type Full Width Slotting Cutters Carrying Round and Octagonal Inserts.
- Fully effective cutter.
- Number of inserts.
SKU: FDN-CM Flange Type Full Width Slotting Cutters Carrying Round and Octagonal Inserts -
Cut off, slot and groove milling, Indexable Tools, Milling Tools
FDN-LN08 Full Slot Shell Mill Cutters Carrying LNET 08… Tangentially Mounted Inserts
Cut off, slot and groove milling, Indexable Tools, Milling ToolsFDN-LN08 Full Slot Shell Mill Cutters Carrying LNET 08… Tangentially Mounted Inserts
- Full Slot Shell Mill Cutters Carrying LNET 08… Tangentially Mounted Inserts.
- Minimum cutting width.
- Maximum cutting width.
- Cutting depth maximum.
- Number of inserts.
- Master insert identification.
SKU: FDN-LN08 Full Slot Shell Mill Cutters Carrying LNET 08... Tangentially Mounted Inserts